Skip to Content

Changes for page 05 Panel

Last modified by Mora Zhou on 2024/07/15 15:05
From version 29.1
edited by Joey
on 2022/06/11 15:55
Change comment: There is no comment for this version
To version 7.2
edited by Leo Wei
on 2022/06/11 13:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Joey
1 +XWiki.admin
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  Figure 5-1 The exterior of the type A servo drive panel
9 9  
10 -The panel of the VD2 series servo drive consists of a display (5-digit LED nixie tube) and keys, which can be used for the execution of various displays, parameter settings and other functions of the servo drive. Taking parameter setting as an example, the general functions of the keys are shown in __[[Table 5-1>>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/05 Panel/#HPanelcomposition]]__.
10 +The panel of the VD2 series servo drive consists of a display (5-digit LED nixie tube) and keys, which can be used for the execution of various displays, parameter settings and other functions of the servo drive. Taking parameter setting as an example, the general functions of the keys are shown in __[[Table 5-1>>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/05%20Panel/#HPanelcomposition]]__.
11 11  
12 12  (% class="table-bordered" style="margin-right:auto" %)
13 13  |(% style="text-align:center; vertical-align:middle" %)**Icon**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Function**
... ... @@ -51,7 +51,7 @@
51 51  
52 52  1. The power is turned on, and the panel display of the servo drive enters “Status Display Mode”.
53 53  1. After an operation failure occurs, the panel immediately switches to the bit failure display mode. At this time, all the nixie tubes flash synchronously. Press the "mode" key to switch to the parameter display mode.
54 -1. Press the "Mode" key to switch between different display modes, and the switching conditions are shown in __[[Figure 5-2>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5faafc734d343eca.gif]]__.
54 +1. Press the "Mode" key to switch between different display modes, and the switching conditions are shown in __[[Figure 5-2>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_5faafc734d343eca.gif?rev=1.1]]__.
55 55  
56 56  == **Status display** ==
57 57  
... ... @@ -67,7 +67,7 @@
67 67  
68 68  == **Parameter display** ==
69 69  
70 -VD2 series servo drive are divided into 13 groups of function codes according to different parameter functions, which could quickly locate the position of function codes according to the function code groups. For the specific parameters refer to__[[ “9 Parameters".>>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/09 Parameters/]]__
70 +VD2 series servo drive are divided into 13 groups of function codes according to different parameter functions, which could quickly locate the position of function codes according to the function code groups. For the specific parameters refer to__[[ “9 Parameters".>>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/09%20Parameters/]]__
71 71  
72 72  **(1) Parameter group display**
73 73  
... ... @@ -74,14 +74,14 @@
74 74  The parameter display is the display of different function codes. The format of the function code is “PXX.YY”. “PXX” indicates the group number of function code, and “YY” indicates the number within the function code group.
75 75  
76 76  (% class="table-bordered" %)
77 -|(% style="text-align:center; vertical-align:middle; width:327px" %)**Display**|(% style="text-align:center; vertical-align:middle; width:490px" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
78 -|(% style="text-align:center; vertical-align:middle; width:327px" %)PXX.YY|(% style="text-align:center; vertical-align:middle; width:490px" %)Function code group number|(% style="text-align:center; vertical-align:middle" %)Number in function code group
77 +|(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
78 +|(% style="text-align:center; vertical-align:middle" %)PXX.YY|(% style="text-align:center; vertical-align:middle" %)Function code group number|(% style="text-align:center; vertical-align:middle" %)Number in function code group
79 79  
80 80  For example: The function code P00.01 is displayed as follows.
81 81  
82 82  (% class="table-bordered" %)
83 -|(% style="text-align:center; vertical-align:middle; width:420px" %)**Display**|(% style="text-align:center; vertical-align:middle; width:463px" %)**Name**|(% style="text-align:center; vertical-align:middle; width:602px" %)**Content**
84 -|(% style="text-align:center; vertical-align:middle; width:420px" %)[[image:https://docs.we-con.com.cn/bin/download/Servo/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/05%20Panel/WebHome/11.jpg?rev=1.1]]|(% style="text-align:center; vertical-align:middle; width:463px" %)Function code P00.01|(% style="text-align:center; vertical-align:middle; width:602px" %)(((
83 +|(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
84 +|(% style="text-align:center; vertical-align:middle" %)[[image:image-20220611131659-1.jpge]]|(% style="text-align:center; vertical-align:middle" %)Function code P00.01|(% style="text-align:center; vertical-align:middle" %)(((
85 85  00: Function code group number
86 86  
87 87  01: Number in the function code group
... ... @@ -96,17 +96,16 @@
96 96  For example: The monitoring volume U0-02 is displayed as follows.
97 97  
98 98  (% class="table-bordered" %)
99 -|(% style="text-align:center; vertical-align:middle; width:424px" %)**Display**|(% style="text-align:center; vertical-align:middle; width:503px" %)**Name**|(% style="text-align:center; vertical-align:middle; width:558px" %)**Content**
100 -|(% style="text-align:center; vertical-align:middle; width:424px" %)[[image:https://docs.we-con.com.cn/bin/download/Servo/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/05%20Panel/WebHome/12.jpg?rev=1.1]]|(% style="text-align:center; vertical-align:middle; width:503px" %)Monitoring volume U0-02|(% style="text-align:center; vertical-align:middle; width:558px" %)Servo motor speed
99 +|(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
100 +|(% style="text-align:center; vertical-align:middle" %)[[image:image-20220611131704-2.jpeg]]|(% style="text-align:center; vertical-align:middle" %)Monitoring volume U0-02|(% style="text-align:center; vertical-align:middle" %)Servo motor speed
101 101  
102 102  2) Display Data more than five bits
103 103  
104 -Display in pages from low to high bits, and each 4 bits is a page. Display method: current page + current value.as shown in __[[Figure 5-3>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_1b79bd139c3057b2.png]]__ and __[[Figure 5-4>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png]]__, switch current page by pressing the "shift" key.
104 +Display in pages from low to high bits, and each 4 bits is a page. Display method: current page + current value.as shown in __[[Figure 5-3>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_1b79bd139c3057b2.png?rev=1.1]]__ and __[[Figure 5-4>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_c63bc504c89e53a8.png?rev=1.1]]__, switch current page by pressing the "shift" key.
105 105  
106 106  For example: 2147483646 is displayed as follows:
107 107  
108 -(% style="text-align:center" %)
109 -[[image:image-20220611155447-1.png]]
108 +[[image:image-20220611131846-1.png]]
110 110  
111 111  Figure 5-3 2147483646 display operation
112 112  
... ... @@ -113,7 +113,7 @@
113 113  For example: -2147483647 is displayed as follows:
114 114  
115 115  (% style="text-align:center" %)
116 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png]]
115 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_c63bc504c89e53a8.png?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png"]]
117 117  
118 118  Figure 5-4 -2147483647 display operation
119 119  
... ... @@ -129,17 +129,17 @@
129 129  
130 130  (% class="table-bordered" %)
131 131  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Display occasion**|(% style="text-align:center; vertical-align:middle" %)**Meaning**
132 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_71833477b416faaf.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
131 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_71833477b416faaf.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_71833477b416faaf.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
133 133  Done
134 134  
135 135  Parameter setting completed
136 136  )))|(% style="text-align:center; vertical-align:middle" %)Parameter reset factory|(% style="text-align:center; vertical-align:middle" %)The servo drive is in the process of parameter factory reset
137 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_66661c97974ab485.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
136 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_66661c97974ab485.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_66661c97974ab485.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
138 138  P.Init
139 139  
140 140  Parameter reset factory
141 141  )))|(% style="text-align:center; vertical-align:middle" %)Parameter reset factory|(% style="text-align:center; vertical-align:middle" %)The servo drive is in the process of parameter factory reset
142 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fe94062b992abf5a.gif]]|(% style="text-align:center; vertical-align:middle" %)(((
141 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_fe94062b992abf5a.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fe94062b992abf5a.gif"]]|(% style="text-align:center; vertical-align:middle" %)(((
143 143  Error
144 144  
145 145  Parameter error
... ... @@ -149,7 +149,7 @@
149 149  
150 150  == **Fault display** ==
151 151  
152 -The panel can display current or historical fault and warning codes. For analysis and troubleshooting of faults and warnings, please refer to__[[ "10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/10 Malfunctions/#HFaultandwarningcodetable]]__.
151 +The panel can display current or historical fault and warning codes. For analysis and troubleshooting of faults and warnings, please refer to__[[ "10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/10%20Malfunctions/#HFaultandwarningcodetable]]__.
153 153  
154 154  When a single fault or warning occurs, the panel immediately displays the current fault or warning code;
155 155  
... ... @@ -157,13 +157,13 @@
157 157  
158 158  (% class="table-bordered" %)
159 159  |(% style="text-align:center; vertical-align:middle" %)**Display**|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Content**
160 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b9eb712b45c52172.gif]]|(% style="text-align:center; vertical-align:middle" %)Parameter modification that needs to be powered on again|(% style="text-align:center; vertical-align:middle" %)Modified the parameters that need to be re-powered to take effect
159 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_b9eb712b45c52172.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b9eb712b45c52172.gif"]]|(% style="text-align:center; vertical-align:middle" %)Parameter modification that needs to be powered on again|(% style="text-align:center; vertical-align:middle" %)Modified the parameters that need to be re-powered to take effect
161 161  
162 162  Table 5-4 Warning display example
163 163  
164 164  (% class="table-bordered" %)
165 165  |(% style="text-align:center; vertical-align:middle; width:303px" %)**Display**|(% style="text-align:center; vertical-align:middle; width:558px" %)**Name**|(% style="text-align:center; vertical-align:middle; width:624px" %)**Content**
166 -|(% style="text-align:center; vertical-align:middle; width:303px" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b851b96afa7ab426.gif]]|(% style="text-align:center; vertical-align:middle; width:558px" %)Motor overload protection|(% style="text-align:center; vertical-align:middle; width:624px" %)Motor overload protection
165 +|(% style="text-align:center; vertical-align:middle; width:303px" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_b851b96afa7ab426.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b851b96afa7ab426.gif"]]|(% style="text-align:center; vertical-align:middle; width:558px" %)Motor overload protection|(% style="text-align:center; vertical-align:middle; width:624px" %)Motor overload protection
167 167  
168 168  Table 5-5 Fault display example
169 169  
... ... @@ -178,13 +178,13 @@
178 178  **volume**
179 179  )))|(% style="text-align:center; vertical-align:middle" %)**Name**|(% style="text-align:center; vertical-align:middle" %)**Unit**|(% style="text-align:center; vertical-align:middle" %)**Meaning**
180 180  |(% style="text-align:center; vertical-align:middle" %)(((
181 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fed555ae469c643d.gif]]
180 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_fed555ae469c643d.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fed555ae469c643d.gif"]]
182 182  
183 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_acb651c29bc239bf.gif]]
182 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_acb651c29bc239bf.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_acb651c29bc239bf.gif"]]
184 184  )))|(% style="text-align:center; vertical-align:middle" %)U0-02|(% style="text-align:center; vertical-align:middle" %)Servo motor speed|(% style="text-align:center; vertical-align:middle" %)rpm|Indicates the actual operating speed of servo motor, expressed in decimal.
185 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_cfc3d1a6717e72f0.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-31|(% style="text-align:center; vertical-align:middle" %)Bus voltage|(% style="text-align:center; vertical-align:middle" %)V|Indicates the voltage value between P+ and - of the drive, the DC bus voltage
186 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_80f9014fcbb17741.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-17|(% style="text-align:center; vertical-align:middle" %)Input signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 8 DI terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level. **(The VD2F model has only 4 DI ports)**
187 -|(% style="text-align:center; vertical-align:middle" %)[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_d032ad3556119999.gif]]|(% style="text-align:center; vertical-align:middle" %)U0-19|(% style="text-align:center; vertical-align:middle" %)Output signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 4 DO terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level.
184 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_cfc3d1a6717e72f0.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_cfc3d1a6717e72f0.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-31|(% style="text-align:center; vertical-align:middle" %)Bus voltage|(% style="text-align:center; vertical-align:middle" %)V|Indicates the voltage value between P+ and - of the drive, the DC bus voltage
185 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_80f9014fcbb17741.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_80f9014fcbb17741.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-17|(% style="text-align:center; vertical-align:middle" %)Input signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 8 DI terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level. **(The VD2F model has only 4 DI ports)**
186 +|(% style="text-align:center; vertical-align:middle" %)[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_d032ad3556119999.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_d032ad3556119999.gif"]]|(% style="text-align:center; vertical-align:middle" %)U0-19|(% style="text-align:center; vertical-align:middle" %)Output signal status|(% style="text-align:center; vertical-align:middle" %)-|Indicates the level status corresponding to the 4 DO terminals. The upper half of the LED light indicates high level, and the lower half light indicates low level.
188 188  
189 189  Table 5-6 Monitoring volume display example
190 190  
... ... @@ -192,7 +192,7 @@
192 192  
193 193  == **Parameter setting** ==
194 194  
195 -Use the servo drive panel to set the parameters. For details about the parameters, please refer to __[[" 9 Parameters">>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/09 Parameters/]]__. Take P00.01 as an example to set the parameters to change the control mode of the servo drive from position control mode to speed control mode. The setting steps are shown in __[[Figure 5-5>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_6c7a398bfc7ce1.gif]]__.
194 +Use the servo drive panel to set the parameters. For details about the parameters, please refer to __[[" 9 Parameters">>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/09%20Parameters/]]__. Take P00.01 as an example to set the parameters to change the control mode of the servo drive from position control mode to speed control mode. The setting steps are shown in __[[Figure 5-5>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_6c7a398bfc7ce1.gif?rev=1.1]]__.
196 196  
197 197  (% style="text-align:center" %)
198 198  [[image:image-20220608162758-1.png]]
... ... @@ -201,7 +201,7 @@
201 201  
202 202  == **Jog operation** ==
203 203  
204 -In order to test run the servo motor and the servo drive, you can use the jog running function. The operation steps are shown in __[[Figure 5-6>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif]]__.
203 +In order to test run the servo motor and the servo drive, you can use the jog running function. The operation steps are shown in __[[Figure 5-6>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46d0c0afb3f9adbe.gif?rev=1.1]]__.
205 205  
206 206  **Illustrate:**
207 207  
... ... @@ -211,16 +211,16 @@
211 211  1. Long press the "Up" key and "Down" key to realize the forward and reverse rotation of the motor.
212 212  1. Press the "Mode" key to exit the JOG mode.
213 213  
214 -Reason for displaying Error: Please refer to __[[“10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2. User Manual/06 VD2 SA Series Servo Drives Manual (Full V1.1)/10 Malfunctions/#HFaultandwarningcodetable]]__according to the corresponding fault codes.
213 +Reason for displaying Error: Please refer to __[[“10 Faults" >>http://13.229.109.52:8080/wiki/servo/view/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/10%20Malfunctions/#HFaultandwarningcodetable]]__according to the corresponding fault codes.
215 215  
216 216  (% style="text-align:center" %)
217 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif]]
216 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46d0c0afb3f9adbe.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif"]]
218 218  
219 219  Figure 5-6 Jog operation setting steps
220 220  
221 221  == **Factory reset** ==
222 222  
223 -The factory settings can be restored through the servo drive panel. The specific operation steps are shown in __[[Figure 5-7>>Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif]]__.
222 +The factory settings can be restored through the servo drive panel. The specific operation steps are shown in __[[Figure 5-7>>http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46722eeaa91a76f9.gif?rev=1.1]]__.
224 224  
225 225  **Illustrate:**
226 226  
... ... @@ -233,6 +233,6 @@
233 233  Error reason: When the parameter value of P10.02 exceeds the set range (0 to 1), “Error” will be displayed.
234 234  
235 235  (% style="text-align:center" %)
236 -[[image:Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif]]
235 +[[image:http://docs.we-con.com.cn/wiki/servo/download/2.%20User%20Manual/06%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29/WebHome/Wecon%20VD2%20SA%20Series%20Servo%20Drives%20Manual%20%28Full%20V1.1%29_html_46722eeaa91a76f9.gif?rev=1.1||alt="Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif"]]
237 237  
238 238  Figure 5-7 Steps for restoring factory settings
11.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Joey
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 KB
Content
12.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Joey
Size
... ... @@ -1,1 +1,0 @@
1 -2.6 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_1b79bd139c3057b2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -11.4 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46722eeaa91a76f9.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_46d0c0afb3f9adbe.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_5faafc734d343eca.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -5.2 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_66661c97974ab485.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_6c7a398bfc7ce1.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -23.9 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_71833477b416faaf.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.3 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_80f9014fcbb17741.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -7.0 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_acb651c29bc239bf.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.4 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b851b96afa7ab426.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.4 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_b9eb712b45c52172.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.0 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_c63bc504c89e53a8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -11.2 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_cfc3d1a6717e72f0.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.1 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_d032ad3556119999.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -4.9 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fe94062b992abf5a.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.1 KB
Content
Wecon VD2 SA Series Servo Drives Manual (Full V1.1)_html_fed555ae469c643d.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -3.3 KB
Content
image-20220611155447-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Joey
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content