Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
18.1 | 1 | |
| |
2.1 | 2 | |
| |
18.1 | 3 | = **Servo drive products** = |
| |
2.1 | 4 | |
| |
18.1 | 5 | == **Servo drive model naming** == |
| |
2.1 | 6 | |
| |
16.1 | 7 | {{id name="OLE_LINK14"/}}[[image:image-20220611113720-1.jpeg]] |
| |
2.1 | 8 | |
| |
16.1 | 9 | Figure 2-1 Servo drive model |
| 10 | |||
| |
2.1 | 11 | {{id name="OLE_LINK12"/}}Figure 2-2 (VD2A) and Figure 2-3 (VD2B) show the exterior and nameplate of the VD2 series absolute value servo drive. |
| 12 | |||
| 13 | {{id name="OLE_LINK11"/}}Figure 2-4 shows the exterior and nameplate of the VD2F series absolute value servo drive. | ||
| 14 | |||
| |
17.1 | 15 | {{id name="_Ref80607254"/}}[[image:image-20220611113747-1.jpeg]] |
| |
2.1 | 16 | |
| 17 | {{id name="OLE_LINK13"/}}{{id name="_Ref13810"/}}Figure 2-2 Exterior and nameplate of VD2A servo drive | ||
| 18 | |||
| |
17.1 | 19 | {{id name="_Toc27523"/}}[[image:image-20220611113753-2.jpeg]] |
| |
2.1 | 20 | |
| 21 | {{id name="_Ref8250"/}}Figure 2-3 Exterior and nameplate of VD2B servo drive | ||
| 22 | |||
| |
17.1 | 23 | [[image:image-20220611113800-3.jpeg]] |
| |
2.1 | 24 | |
| 25 | {{id name="_Ref8394"/}}Figure 2-4 Exterior and nameplate of VD2F servo drive | ||
| 26 | |||
| |
18.1 | 27 | === {{id name="_2.1.2_The_composition_of_the_servo_driv"/}}**The composition of the servo drive** === |
| |
2.1 | 28 | |
| |
17.1 | 29 | [[image:image-20220611113807-4.jpeg]] |
| |
2.1 | 30 | |
| 31 | Figure 2-5 Composition of VD2A servo drive | ||
| 32 | |||
| |
17.1 | 33 | [[image:image-20220611113814-5.jpeg]] |
| |
2.1 | 34 | |
| 35 | Figure 2-6 Composition of VD2B servo drive | ||
| 36 | |||
| |
17.1 | 37 | [[image:image-20220611113824-6.jpeg]] |
| |
2.1 | 38 | |
| 39 | Figure 2-7 Composition of VD2F servo drive | ||
| 40 | |||
| |
19.1 | 41 | (% style="text-align:center" %) |
| |
2.1 | 42 | [[image:3_html_4b8f9126cfc3a494.png||height="203" width="565"]] |
| 43 | |||
| 44 | Figure 2-8 Short connection of braking resistor | ||
| 45 | |||
| |
20.1 | 46 | == **Specification of the servo drive** == |
| |
2.1 | 47 | |
| 48 | The specification of VD2 series servo drive is shown in Table 2-1 below. | ||
| 49 | |||
| 50 | |((( | ||
| 51 | **Electrical** | ||
| 52 | |||
| 53 | **specification** | ||
| 54 | |||
| 55 | **Servo drive model** | ||
| 56 | )))|**VD2A and VD2B servo drive**|**VD2F servo drive** | ||
| 57 | |Power supply|((( | ||
| 58 | {{id name="OLE_LINK17"/}}Under 750W: Use single-phase 200V to 240V, AC 50/60Hz power supply; | ||
| 59 | |||
| 60 | 1.0kW to 2.6kW could use single-phase AC 220V or three-phase AC 220V ; | ||
| 61 | |||
| 62 | It is recommended to use three-phase 220VAC power supply. | ||
| 63 | )))|((( | ||
| 64 | Single-phase 220V, -10% to 10%, | ||
| 65 | |||
| 66 | 50/60Hz | ||
| 67 | ))) | ||
| |
15.1 | 68 | |Control power supply (**✎Note**)|Single-phase AC 200V to 240V, 50/60Hz.| |
| |
2.1 | 69 | |Braking method|(% colspan="2" %)Built-in braking resistor, and external braking resistor could be connected. |
| 70 | |||
| 71 | Table 2-1 Servo drive electrical specifications | ||
| 72 | |||
| 73 | ✎**Note:** | ||
| 74 | |||
| 75 | Only VD2B drive support independent power supply for control power supply, and VD2A and VD2F drives do not require a separate control power supply. | ||
| 76 | |||
| |
19.1 | 77 | = **Servo motor products** = |
| |
2.1 | 78 | |
| |
19.1 | 79 | == **Servo motor model naming** == |
| |
2.1 | 80 | |
| |
19.1 | 81 | [[image:image-20220611113840-7.png]] |
| |
2.1 | 82 | |
| |
17.1 | 83 | Figure 2-9 Servo motor naming |
| |
2.1 | 84 | |
| |
17.1 | 85 | {{id name="_Toc8121"/}}[[image:image-20220611113846-8.jpeg]] |
| 86 | |||
| |
2.1 | 87 | Figure 2-10 Servo motor nameplate |
| 88 | |||
| |
20.1 | 89 | == **Composition of Servo motor** == |
| |
2.1 | 90 | |
| |
17.1 | 91 | [[image:image-20220611113853-9.jpeg]] |
| |
2.1 | 92 | |
| 93 | Figure 2-11 Motor composition of 40, 60 and 80 flange | ||
| 94 | |||
| |
17.1 | 95 | (% style="text-align:center" %) |
| 96 | [[image:image-20220611113858-10.jpeg]] | ||
| |
2.1 | 97 | |
| 98 | Figure 2-12 Motor composition of 110 and 130 flange | ||
| 99 | |||
| |
20.1 | 100 | == **Specification of the servo motor** == |
| |
2.1 | 101 | |
| 102 | |**Wecon motor model**|((( | ||
| 103 | **Motor** | ||
| 104 | |||
| 105 | **code** | ||
| 106 | )))|**Flange size**|((( | ||
| 107 | **Rated power** | ||
| 108 | |||
| 109 | **(KW)** | ||
| 110 | )))|((( | ||
| 111 | **Rated torque** | ||
| 112 | |||
| 113 | **(N.m)** | ||
| 114 | )))|((( | ||
| 115 | **Voltage** | ||
| 116 | |||
| 117 | **(V)** | ||
| 118 | )))|((( | ||
| 119 | **Rated speed** | ||
| 120 | |||
| 121 | **(rpm)** | ||
| 122 | )))|**Encoder type**|**Brake** | ||
| 123 | |WE130M-10025S-A1F|A091|130|1.0|4.0|220|2500|17-bit single turn absolute magnetic|No | ||
| 124 | |WE130M-15025S-A1G|A111|130|1.5|6.0|220|2500|17-bit single turn absolute magnetic|Yes | ||
| 125 | |WE130M-26025S-C1F|C191|130|2.6|10|220|2500|17-bit multi turn absolute magnetic|No | ||
| 126 | |WE80M-12030S-C1G|C231|80|1.2|4.0|220|3000|17-bit multi turn absolute magnetic|Yes | ||
| 127 | |WE110M-18030S-D2G|D131|110|1.8|6.0|220|3000|23-bit multi turn absolute optical|Yes | ||
| 128 | |WE130M-23015S-D2F|D161|130|2.3|15.0|220|1500|23-bit multi turn absolute optical|No | ||
| 129 | |||
| 130 | Table 2-1 Wecon Motor Specifications | ||
| 131 | |||
| 132 | ✎**Note:** | ||
| 133 | |||
| 134 | Only part of the motor models are displayed, please refer to the “Model Selection Manual” for details. |