Skip to Content

Wiki source code of 05 Servo Product Manual

Version 73.1 by Devin Chen on 2024/09/26 11:30
Show last authors
1 = Servo Drive Naming Rules =
2
3 (% class="table-striped" style="margin-left:auto; margin-right:auto; width:20px" %)
4 |(((
5 (% class="wikigeneratedid" id="HVD2" %)
6 __VD2__
7 )))|(((
8 (% class="wikigeneratedid" id="H-" %)
9 -
10 )))|(((
11 (% class="wikigeneratedid" id="H021" %)
12 __021__
13 )))|(((
14 (% class="wikigeneratedid" id="HS" %)
15 __S__
16 )))|(((
17 (% class="wikigeneratedid" id="HA1" %)
18 __A1__
19 )))|(((
20 (% class="wikigeneratedid" id="HG" %)
21 __G__
22 )))
23 |(((
24 (% class="wikigeneratedid" id="H2460" %)
25 ①
26 )))|(((
27 (% class="wikigeneratedid" id="H" %)
28
29 )))|(((
30 (% class="wikigeneratedid" id="H2461" %)
31 ②
32 )))|(((
33 (% class="wikigeneratedid" id="H2462" %)
34 ③
35 )))|(((
36 (% class="wikigeneratedid" id="H2463" %)
37 ④
38 )))|(((
39 (% class="wikigeneratedid" id="H2464" %)
40 ⑤
41 )))
42
43 |(% colspan="1" rowspan="4" %)①Product Series|VD2|(% rowspan="14" %) |(% colspan="1" rowspan="2" %)③Voltage level|S: 220V
44 |VD2F|T: 380V
45 |VD2L|(% colspan="2" rowspan="3" %)
46 |VD3E
47 |(% colspan="2" rowspan="1" %)
48 |(% colspan="1" rowspan="9" %)②Maximum output current|010: 10A|(% colspan="1" rowspan="2" %)④Encoder type|A1: Absolute
49 |014: 14A|E1: Incremental
50 |016: 16A|(% colspan="2" rowspan="2" %)
51 |019: 19A
52 |021: 21A|(% colspan="1" rowspan="5" %)⑤Function|P: Basic pulse control
53 |025: 25A|G: General(Analog control, full-closed loop)
54 |030: 30A|H: High speed DO(Collector signal feedback)
55 |040: 40A|R: Support external PID function
56 |050: 50A|D: Support dynamic braking function
57
58 (% style="text-align:center" %)
59 (((
60 (% style="display:inline-block" %)
61 [[Drive Nameplate>>image:1726038660755-332.png||_mstalt="294567"]]
62 )))
63
64 = VD2 Servo Drive Parameter Table =
65
66 |(% colspan="3" %)(((
67 **General type**
68 )))|(((
69 (% style="text-align:center" %)
70 [[image:1726038778533-997.png||_mstalt="300053"]]
71 )))|(((
72 (% style="text-align:center" %)
73 [[image:1726038786193-560.png||_mstalt="296309"]]
74 )))|(((
75 (% style="text-align:center" %)
76 [[image:1726038790641-417.png||_mstalt="295087"]]
77 )))
78 |(% colspan="3" %)**Model**|**VD2(A type)**|**VD2(B type)**|**VD2(C type)**
79 |(% colspan="1" rowspan="11" %)(((
80 **Basic Specifications**
81 )))|(% colspan="2" %)**Power supply**|220V|220V/380V|380V
82 |(% colspan="2" %)(((
83 **Control method**
84 )))|(% colspan="3" rowspan="1" %)(((
85 IGBT PWM control sine wave current drive
86 )))
87 |(% colspan="2" %)(((
88 **Encoder**
89 )))|(% colspan="3" rowspan="1" %)(((
90 2500-line incremental encoder, 17-bit/23-bit absolute encoder
91 )))
92 |(% colspan="2" %)(((
93 **Control signal input**
94 )))|(% colspan="3" rowspan="1" %)8DI
95 |(% colspan="2" %)(((
96 **Control signal output**
97 )))|(% colspan="3" rowspan="1" %)4DO
98 |(% colspan="2" %)(((
99 **Analog signal input**
100 )))|(% colspan="3" rowspan="1" %)(((
101 2 AI(-10V to +10V)
102 )))
103 |(% colspan="2" %)(((
104 **Pulse signal input**
105 )))|(% colspan="3" rowspan="1" %)(((
106 Open collector or differential input
107 )))
108 |(% colspan="2" %)(((
109 **Pulse feedback output**
110 )))|(% colspan="3" rowspan="1" %)ABZ differential output(VD2-XXXXXXH series support collector signal feedback)
111 |(% colspan="2" %)(% style="background-color:transparent" %)**Internal Command**|(% colspan="3" rowspan="1" %)(((
112 8 segment internal speed command, 16 segment internal position command
113 )))
114 |(% colspan="2" %)(((
115 **Communication**
116 )))|(% colspan="3" rowspan="1" %)(((
117 MODBUS RS485 or MODBUS RS422(SCTool)
118 )))
119 |(% colspan="2" %)(((
120 **Braking resistor**
121 )))|(% colspan="3" rowspan="1" %)(((
122 Internal braking resistor(also support external braking resistor)
123 )))
124 |(% colspan="1" rowspan="19" %)(((
125 **Function setting**
126 )))|(% colspan="1" rowspan="9" %)(((
127 **General functions**
128 )))|(((
129 **Auto-tuning**
130 )))|(% colspan="3" rowspan="1" %)(((
131 Automatic load inertia identification, automatic rigidity self-tuning (SCTool)
132 )))
133 |(% colspan="1" rowspan="2" %)(((
134 **Waveform**
135 )))|(% colspan="3" rowspan="1" %)(((
136 4 channels waveform monitoring (SCTool)
137 )))
138 |(% colspan="3" rowspan="1" %)(((
139 10s waveform data recording (SCTool)
140 )))
141 |(((
142 **Parameter management**
143 )))|(% colspan="3" rowspan="1" %)(((
144 Support batch parameter import and export
145 )))
146 |(((
147 **Vibration suppression**
148 )))|(% colspan="3" rowspan="1" %)(((
149 Support mechanical vibration suppression
150 )))
151 |(((
152 **Protection**
153 )))|(% colspan="3" rowspan="1" %)(((
154 Overvoltage, undervoltage, overcurrent, overspeed, overload, overheating, encoder failure, excessive position deviation, torque limit, speed limit, etc.
155 )))
156 |(((
157 **Brake device**
158 )))|(% colspan="3" rowspan="1" %)(((
159 Support brake signal output
160 )))
161 |(((
162 **DI function**
163 )))|(% colspan="3" rowspan="1" %)(((
164 Servo enable((% _mstmutation="1" %)**S-ON**(%%)), Error/alarm clear((% _mstmutation="1" %)**A-CLR**(%%)), Forward rotation prohibited((% _mstmutation="1" %)**POT**(%%))
165
166 Backward rotation prohibited((% _mstmutation="1" %)**NOT**(%%)), Command direction((% _mstmutation="1" %)**C-SIGN**(%%)), Emergency stop((% _mstmutation="1" %)**E-STOP**(%%))
167
168 Gain switch((% _mstmutation="1" %)**GAIN-5EL**(%%)), Internal speed selection((% _mstmutation="1" %)**INSPD1, INSPD2, INSPD3**(%%))
169
170 Internal position selection and enable((% _mstmutation="1" %)**INPO51, INPO52, INPO53, INPO54, ENINPOS**(%%))
171 )))
172 |(((
173 **DO function**
174 )))|(% colspan="3" rowspan="1" %)(((
175 Servo ready((% _mstmutation="1" %)**RDY**(%%))、Error signal((% _mstmutation="1" %)**ALM**(%%)), Alarm signal((% _mstmutation="1" %)**WARN**(%%)), Rotation detection((% _mstmutation="1" %)**TGON**(%%))
176
177 Zero speed signal((% _mstmutation="1" %)**ZSP**(%%)), Torque limited((% _mstmutation="1" %)**T-LIMIT**(%%)), Velocity limited((% _mstmutation="1" %)**V-LIMIT**(%%))
178
179 Servo start(**SRV-ST**), Servo brake output(**BRK-OFF**), ABZ pulse feedback output
180 )))
181 |(% colspan="1" rowspan="4" %)(((
182 **Position mode**
183 )))|(((
184 **Pulse frequency**
185 )))|(% colspan="3" rowspan="1" %)(((
186 Max to 500KHz
187 )))
188 |(((
189 **Pulse type**
190 )))|(% colspan="3" rowspan="1" %)(((
191 Direction + Pulse, CW/CCW, Orthogonal coding
192 )))
193 |(((
194 **Pulse filter**
195 )))|(% colspan="3" rowspan="1" %)(((
196 First-order low-pass filter or smoothing filter
197 )))
198 |(((
199 **Pulse output**
200 )))|(% colspan="3" rowspan="1" %)(((
201 A, B, Z differential output
202 )))
203 |(% colspan="1" rowspan="3" %)(((
204 **Speed mode**
205 )))|(((
206 **Command input**
207 )))|(% colspan="3" rowspan="1" %)(((
208 Analog input(-10V to +10V), Internal command(8 segments)
209 )))
210 |(((
211 **Zero speed clamp**
212 )))|(% colspan="3" rowspan="1" %)(((
213 Support
214 )))
215 |(((
216 **Torque limit**
217 )))|(% colspan="3" rowspan="1" %)(((
218 Torque limit under speed mode
219 )))
220 |(% colspan="1" rowspan="3" %)(((
221 **Torque mode**
222 )))|(((
223 **Command input**
224 )))|(% colspan="3" rowspan="1" %)(((
225 Analog input(-10V to +10V), Internal command
226 )))
227 |(((
228 **Torque reach**
229 )))|(% colspan="3" rowspan="1" %)(((
230 Torque reach signal output
231 )))
232 |(((
233 **Velocity limit**
234 )))|(% colspan="3" rowspan="1" %)(((
235 Velocity limit under torque mode
236 )))
237
238 = **VD2F/VD2L servo driver parameter table** =
239
240 (% style="width:1406px" %)
241 |(% colspan="6" rowspan="1" style="width:537px" %)(((
242 **General type**
243 )))|(% colspan="1" rowspan="1" style="width:503px" %)(((
244 (% style="text-align:center" %)
245 [[image:1726190862910-426.png]]
246 )))|(% rowspan="1" style="width:364px" %)(((
247 (% style="text-align:center" %)
248 [[image:1726190785664-427.png]]
249 )))
250 |(% colspan="6" rowspan="1" style="width:537px" %)**Model**|(% colspan="1" rowspan="1" style="width:503px" %)(((
251 **VD2F**
252 )))|(% rowspan="1" style="width:364px" %)(((
253 **VD2L**
254 )))
255 |(% colspan="3" rowspan="12" %)(((
256 **Basic Specifications**
257 )))|(% colspan="3" style="width:277px" %)**Power supply**|(% colspan="1" rowspan="1" style="width:503px" %)(((
258 220V
259 )))|(% rowspan="1" style="width:364px" %)(((
260 220V
261 )))
262 |(% colspan="3" style="width:277px" %)(((
263 **Control method**
264 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
265 IGBT PWM control sine wave current drive
266 )))
267 |(% colspan="3" style="width:277px" %)(((
268 **Encoder**
269 )))|(% colspan="2" rowspan="1" style="width:867px" %)17bit, 23bit absolute value encoder
270 |(% colspan="3" style="width:277px" %)(((
271 **Control signal input**
272 )))|(% colspan="2" rowspan="1" style="width:867px" %)4DI
273 |(% colspan="3" style="width:277px" %)(((
274 **Control signal output**
275 )))|(% colspan="2" rowspan="1" style="width:867px" %)4DO
276 |(% colspan="3" style="width:277px" %)(((
277 **Pulse frequency division output**
278 )))|(% colspan="1" rowspan="1" style="width:503px" %)—|(% rowspan="1" style="width:364px" %)(((
279 Support
280 )))
281 |(% colspan="3" style="width:277px" %)(((
282 **Pulse signal input**
283 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
284 Open collector or differential input
285 )))
286 |(% colspan="3" style="width:277px" %)(((
287 **Pulse feedback output**
288 )))|(% colspan="1" rowspan="1" style="width:503px" %)(((
289 Z signal open collector output
290 )))|(% rowspan="1" style="width:364px" %)ABZ phase pulse output or pulse+direction output
291 |(% colspan="3" style="width:277px" %)(% style="background-color:transparent" %)**Internal Command**|(% colspan="2" rowspan="1" style="width:867px" %)(((
292 8 segment internal speed command, 16 segment internal position command
293 )))
294 |(% colspan="3" style="width:277px" %)(((
295 **Communication**
296 )))|(% rowspan="1" style="width:867px" %)(((
297 MODBUS RS485 and MODBUS RS422(SCTool)
298 )))|(% rowspan="1" style="width:867px" %)MODBUS RS485 and Type-C(SCTool)
299 |(% colspan="3" rowspan="2" style="width:277px" %)(((
300 **Braking resistor**
301 )))|(% colspan="4" rowspan="1" style="width:867px" %)(((
302 750W built-in braking resistor; 400W without built-in;
303 )))
304 |(% colspan="4" style="width:867px" %)(((
305 Both can support external braking resistors.
306 )))
307 |(% colspan="3" rowspan="22" %)(((
308 **Function setting**
309 )))|(% colspan="1" rowspan="12" %)(((
310 **General functions**
311 )))|(% colspan="2" style="width:39px" %)(((
312 **Auto-tuning**
313 )))|(% colspan="1" rowspan="1" style="width:503px" %)(((
314 Automatic load inertia identification, automatic rigidity self-tuning
315 )))|(% rowspan="1" style="width:364px" %)Automatic load inertia identification
316 |(% colspan="2" style="width:39px" %)(((
317 **Mix control**
318 )))|(% colspan="1" rowspan="1" style="width:503px" %)(((
319 YES
320 )))|(% rowspan="1" style="width:364px" %)-
321 |(% colspan="2" style="width:39px" %)(((
322 **Advanced control algorithms**
323 )))|(% colspan="1" style="width:503px" %)(((
324 YES
325 )))|(% style="width:364px" %)-
326 |(% colspan="2" rowspan="2" style="width:39px" %)(((
327 **Waveform**
328 )))|(% colspan="2" style="width:867px" %)4 channels waveform monitoring
329 |(% colspan="2" style="width:867px" %)10s waveform data recording
330 |(% colspan="2" style="width:39px" %)(((
331 **Parameter management**
332 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
333 Support batch parameter import and export
334 )))
335 |(% colspan="2" style="width:39px" %)(((
336 **Vibration suppression**
337 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
338 Support mechanical vibration suppression
339 )))
340 |(% colspan="2" style="width:39px" %)(((
341 **Protection**
342 )))|(% colspan="2" style="width:867px" %)(((
343 Overvoltage, undervoltage, overcurrent, overspeed, overload, overheating, encoder failure, excessive position deviation, torque limit, speed limit, etc.
344 )))
345 |(% colspan="2" style="width:39px" %)(((
346 **Dynamic braking**
347 )))|(% colspan="1" style="width:503px" %)-|(% style="width:364px" %)(((
348 Optional
349 )))
350 |(% colspan="2" style="width:39px" %)(((
351 **Brake device**
352 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
353 Support brake signal output
354 )))
355 |(% colspan="2" style="width:39px" %)(((
356 **DI function**
357 )))|(% colspan="2" rowspan="1" style="width:867px" %)(((
358 Servo enable((% _mstmutation="1" %)**S-ON**(%%)), Error/alarm clear((% _mstmutation="1" %)**A-CLR**(%%)), Forward rotation prohibited((% _mstmutation="1" %)**POT**(%%))
359
360 Backward rotation prohibited((% _mstmutation="1" %)**NOT**(%%)), Command direction((% _mstmutation="1" %)**C-SIGN**(%%)), Emergency stop((% _mstmutation="1" %)**E-STOP**(%%))
361
362 Gain switch((% _mstmutation="1" %)**GAIN-5EL**(%%)), Internal speed selection((% _mstmutation="1" %)**INSPD1, INSPD2, INSPD3**(%%))
363
364 Internal position selection and enable((% _mstmutation="1" %)**INPO51, INPO52, INPO53, INPO54, ENINPOS**(%%))
365 )))
366 |(% colspan="2" style="width:39px" %)(((
367 **DO function**
368 )))|(% colspan="1" rowspan="1" style="width:503px" %)(((
369 Servo ready((% _mstmutation="1" %)**RDY**(%%))、Error signal((% _mstmutation="1" %)**ALM**(%%)), Alarm signal((% _mstmutation="1" %)**WARN**(%%)), Rotation detection((% _mstmutation="1" %)**TGON**(%%))
370
371 Zero speed signal((% _mstmutation="1" %)**ZSP**(%%)), Torque limited((% _mstmutation="1" %)**T-LIMIT**(%%)), Velocity limited((% _mstmutation="1" %)**V-LIMIT**(%%))
372
373 Servo start(**SRV-ST**), Servo brake output(**BRK-OFF**), Z pulse feedback output
374 )))|(% rowspan="1" style="width:364px" %)(((
375 Servo ready(**RDY**)、Error signal(**ALM**), Alarm signal(**WARN**), Rotation detection(**TGON**)
376
377 Zero speed signal(**ZSP**), Torque limited(**T-LIMIT**), Velocity limited(**V-LIMIT**)
378
379 Servo start(**SRV-ST**), Servo brake output(**BRK-OFF**), ABZ pulse feedback output
380 )))
381 |(% colspan="1" rowspan="4" %)**Position mode**|**Pulse frequency**|(% colspan="3" rowspan="1" %)(((
382 Max to 500KHz
383 )))
384 |(% colspan="2" rowspan="1" style="width:39px" %)**Pulse type**|(% rowspan="1" style="width:503px" %)(((
385 Direction + pulse; Orthogonal coding:
386 V1.21 and above support CW/CCW
387 )))|(% rowspan="1" style="width:337px" %)Direction + Pulse, Orthogonal coding
388 |(% colspan="2" rowspan="1" style="width:39px" %)**Pulse filter**|(% colspan="2" rowspan="1" style="width:867px" %)First-order low-pass filter or smoothing filter
389 |(% colspan="2" rowspan="1" style="width:39px" %)(((
390 **Pulse output**
391 )))|(% rowspan="1" style="width:503px" %)-|(% rowspan="1" style="width:337px" %)A, B, Z differential output
392 |(% colspan="1" rowspan="3" %)(((
393 **Speed mode**
394 )))|(% colspan="2" style="width:39px" %)**Command input**|(% colspan="2" rowspan="1" style="width:867px" %)Internal command(8 segments)
395 |(% colspan="2" style="width:39px" %)**Zero speed clamp**|(% colspan="2" rowspan="1" style="width:867px" %)Support
396 |(% colspan="2" style="width:39px" %)**Torque limit**|(% colspan="2" rowspan="1" style="width:867px" %)Torque limit under speed mode
397 |(% colspan="1" rowspan="3" %)**Torque mode**|(% colspan="2" style="width:39px" %)**Command input**|(% colspan="2" rowspan="1" style="width:867px" %)(((
398 Internal command
399 )))
400 |(% colspan="2" style="width:39px" %)**Torque reach**|(% colspan="2" rowspan="1" style="width:867px" %)(((
401 Torque reach signal output
402 )))
403 |(% colspan="2" style="width:39px" %)**Velocity limit**|(% colspan="2" rowspan="1" style="width:867px" %)(((
404 Velocity limit under torque mode
405 )))
406
407 = VD3E servo driver parameter table =
408
409 (% style="margin-left:auto; margin-right:auto; width:1149.22px" %)
410 |(% colspan="3" rowspan="1" style="width:445px" %)(((
411 **Bus type**
412 )))|(% style="width:327px" %)(((
413 (% style="text-align:center" %)
414 [[image:1726295827531-129.png]]
415
416 (((
417
418 )))
419 )))|(((
420 (% style="text-align:center" %)
421 [[image:1726295883786-742.png]]
422
423 (((
424
425 )))
426 )))|(((
427 (% style="text-align:center" %)
428 [[image:1726295894302-137.png]]
429 )))
430 |(% colspan="3" rowspan="1" style="width:445px" %)**Model**|(% style="width:327px" %)(((
431 **VD3E(A type)**
432 )))|(((
433 **VD3E(B type)**
434 )))|(((
435 **VD3E(C type)**
436 )))
437 |(% colspan="1" rowspan="7" style="width:166px" %)(((
438 **Basic Specifications**
439 )))|(% colspan="2" style="width:279px" %)**Power supply**|(% style="width:327px" %)220V|220V/380V|380V
440 |(% colspan="2" style="width:279px" %)**Control method**|(% colspan="3" rowspan="1" style="width:672px" %)IGBT PWM control sine wave current drive
441 |(% colspan="2" style="width:279px" %)**Encoder**|(% colspan="3" rowspan="1" style="width:672px" %)17bit, 23bit absolute value encoder
442 |(% colspan="2" style="width:279px" %)**Control signal input**|(% colspan="3" rowspan="1" style="width:672px" %)(((
443 6DI, Select the output function according to the function code configuration
444 )))
445 |(% colspan="2" style="width:279px" %)**Control signal output**|(% colspan="3" rowspan="1" style="width:672px" %)(((
446 3DO, Select the output function according to the function code configuration
447 )))
448 |(% style="width:147px" %)(((
449 **Communication function**
450 )))|(% style="width:133px" %)(((
451 **Host computer communication**
452 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
453 The USB interface can be used to set function code parameters, monitor status, and view waveforms through a computer host computer.
454 Parameter self-tuning, etc.
455 )))
456 |(% colspan="2" style="width:279px" %)**Braking resistor**|(% colspan="3" rowspan="1" style="width:672px" %)(((
457 Built-in braking resistor, supports external braking resistor
458 )))
459 |(% colspan="1" rowspan="9" style="width:166px" %)**General functions**|(% colspan="2" style="width:279px" %)**Auto-tuning**|(% colspan="3" rowspan="1" style="width:672px" %)Automatic load inertia identification,automatic rigidity self-tuning
460 |(% colspan="2" style="width:279px" %)(((
461 **Waveform viewing**
462 )))|(% colspan="3" rowspan="1" style="width:672px" %)4 channels waveform monitoring
463 |(% colspan="2" style="width:279px" %)(((
464 **Waveform storage**
465 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
466 Waveform acquisition frequency 1K Hz,(% style="background-color:transparent" %)10s waveform data recording
467 )))
468 |(% colspan="2" style="width:279px" %)**Parameter management**|(% colspan="3" rowspan="1" style="width:672px" %)Support batch parameter import and export
469 |(% colspan="2" style="width:279px" %)(((
470 **Vibration suppression**
471 )))|(% colspan="3" rowspan="1" style="width:672px" %)Support mechanical vibration suppression
472 |(% colspan="2" style="width:279px" %)(((
473
474
475 **Protection**
476 )))|(% colspan="3" rowspan="1" style="width:672px" %)Overvoltage, undervoltage, overcurrent, overspeed, overload, overheating, encoder failure, excessive position deviation, torque limit, speed limit, etc.
477 |(% colspan="2" style="width:279px" %)**Brake device**|(% colspan="3" rowspan="1" style="width:672px" %)Support brake signal output
478 |(% colspan="2" style="width:279px" %)**DI function**|(% colspan="3" rowspan="1" style="width:672px" %)(((
479 Servo enable((% _mstmutation="1" %)**S-ON**(%%)), Error/alarm clear((% _mstmutation="1" %)**A-CLR**(%%)), Forward rotation prohibited((% _mstmutation="1" %)**POT**(%%))Backward rotation prohibited((% _mstmutation="1" %)**NOT**(%%)), Emergency stop((% _mstmutation="1" %)**E-STOP**(%%))
480 )))
481 |(% colspan="2" style="width:279px" %)**DO function**|(% colspan="3" rowspan="1" style="width:672px" %)(((
482 Servo ready((% _mstmutation="1" %)**RDY**(%%))、Error signal((% _mstmutation="1" %)**ALM**(%%)), Alarm signal((% _mstmutation="1" %)**WARN**(%%)), Rotation detection((% _mstmutation="1" %)**TGON**(%%))
483
484 Zero speed signal((% _mstmutation="1" %)**ZSP**(%%)), Torque limited((% _mstmutation="1" %)**T-LIMIT**(%%)), Velocity limited((% _mstmutation="1" %)**V-LIMIT**(%%))
485
486 Servo start(**SRV-ST**), Servo brake output(**BRK-OFF**),CommunicationVDO
487 )))
488 |(% colspan="1" rowspan="16" style="width:166px" %)(((
489 **EtherCAT related**
490 )))|(% rowspan="14" style="width:147px" %)(((
491 **EtherCAT related**
492 )))|(% style="width:133px" %)(((
493 **Communication protocol**
494 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
495 EtherCAT protocol
496 )))
497 |(% style="width:133px" %)(((
498 **Support services**
499 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
500 CoE(PDO,SDO)
501 )))
502 |(% style="width:133px" %)(((
503 **Sync mode**
504 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
505 DC-Distributed Clock
506 )))
507 |(% style="width:133px" %)(((
508 **Physical layer**
509 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
510 100BASE-TX
511 )))
512 |(% style="width:133px" %)(((
513 **Baud rate**
514 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
515 100 Mbit/s(100Base-TX)
516 )))
517 |(% style="width:133px" %)(((
518 **Duplex mode**
519 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
520 Full duplex
521 )))
522 |(% style="width:133px" %)(((
523 **Topology**
524 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
525 Circular, linear
526 )))
527 |(% style="width:133px" %)(((
528 **Transmission medium**
529 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
530 Shielded Category 5e or better network cable
531 )))
532 |(% style="width:133px" %)(((
533 **Transmission distance**
534 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
535 Less than 100M between two nodes (good environment, good cables)
536 )))
537 |(% style="width:133px" %)(((
538 **Frame length**
539 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
540 44 bytes~~1498 bytes
541 )))
542 |(% style="width:133px" %)(((
543 **Excessive data**
544 )))|(% colspan="5" rowspan="1" style="width:672px" %)Maximum size of a single Ethernet frame is 1486 bytes
545 |(% style="width:133px" %)(((
546 **Sync jitter**
547 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
548 <1μs
549 )))
550 |(% style="width:133px" %)(((
551 **Distributed clock**
552 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
553 64 bit
554 )))
555 |(% style="width:133px" %)(((
556 **EEPROM capacity**
557 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
558 8k bit initialization data is written through the EtherCAT master station
559 )))
560 |(% rowspan="2" style="width:147px" %)(((
561 **Control mode and performance**
562 )))|(% style="width:133px" %)(((
563 **Control mode**
564 )))|(% colspan="3" rowspan="1" style="width:672px" %)(((
565 CSP、HM
566 )))
567 |(% style="width:133px" %)**Synchronization period**|(% colspan="3" rowspan="1" style="width:672px" %)(((
568 125μs
569 )))
570
571 = **Servo Motor Naming Rules** =
572
573 (% style="margin-left:auto; margin-right:auto; width:50px" %)
574 |WD|80|M|-|075|30|S|-|A1|F|-|L
575 |①|②|③| |④|⑤|⑥| |⑦|⑧| |⑨
576
577 |(% rowspan="2" %)①Pole pairs|WD: 5|(% rowspan="14" %) |(% rowspan="6" %)④Rated power|010：100W|(% rowspan="14" %) |(% rowspan="4" %)⑦Encoder type|A1: 17bit single-turn absolute magnetic encoder
578 |WE: 4|020：200W|C1：17bit multi-turn absolute magnetic encoder
579 |(% colspan="2" rowspan="1" %) |...|D2：23bit multi-turn absolute optical encoder
580 |(% rowspan="7" %)②Flange|40|500：5.0KW|E1: 2500-line incremental encoder
581 |60|550：5.5KW|(% colspan="2" rowspan="1" %)
582 |80|...|(% rowspan="2" %)⑧Motor structure|F：Oil seal
583 |110|(% colspan="2" rowspan="1" %) |G：Oil seal + Brake device
584 |130|(% rowspan="4" %)⑤Rated speed|15：1500rpm|(% colspan="2" rowspan="1" %)
585 |150|20：2000rpm|(% rowspan="3" %)⑨Others|L：60/80 flange connector
586 |180|25：2500rpm|(% rowspan="2" %)L2：60/80/130 flange connector
587 |(% colspan="2" rowspan="1" %) |30：3000rpm
588 |(% rowspan="3" %)③Inertia level|L: Low|(% colspan="2" rowspan="1" %) |(% colspan="2" rowspan="3" %)
589 |M: Middle|(% rowspan="2" %)⑥Voltage level|S: 220V
590 |H: High|T: 380V
591
592 (% style="text-align:center" %)
593 [[image:Servo.Manual.02 VD2 SA Series.test.WebHome@image-20220611113846-8.jpeg]]
594
595 Motor nameplate
596
597 = (% style="color:inherit; font-family:inherit; font-size:max(23px, min(29px, 12.3333px + 1.38889vw))" %)**Servo Motor Parameter**(%%) =
598
599 |(% style="width:172px" %)**220V motor model**|(% style="width:78px" %)**Flange mm**|(% style="width:86px" %)**Power kW**|(% style="width:100px" %)**Rated speed rpm**|(% style="width:115px" %)**Rated torque N*m**|(% style="width:115px" %)**Rated current A**|(% style="width:162px" %)**Allowable overload multiple**|**Pole pairs**|**Inertia level**
600 |(% style="width:172px" %)WD40M-01030S-☐☐☐|(% style="width:78px" %)40|(% style="width:86px" %)0.1|(% style="width:100px" %)3000|(% style="width:115px" %)0.318|(% style="width:115px" %)1.0|(% style="width:162px" %)3.0|5|Middle
601 |(% colspan="9" style="width:172px" %)
602 |(% style="width:172px" %)WD60M-02030S-☐☐☐|(% style="width:78px" %)60|(% style="width:86px" %)0.2|(% style="width:100px" %)3000|(% style="width:115px" %)0.64|(% style="width:115px" %)1.7|(% style="width:162px" %)3.0|5|(% rowspan="3" %)Middle
603 |(% style="width:172px" %)WD60M-04030S-☐☐☐|(% style="width:78px" %)60|(% style="width:86px" %)0.4|(% style="width:100px" %)3000|(% style="width:115px" %)1.27|(% style="width:115px" %)2.5|(% style="width:162px" %)3.0|5
604 |(% style="width:172px" %)WD60M-06030S-☐☐☐|(% style="width:78px" %)60|(% style="width:86px" %)0.6|(% style="width:100px" %)3000|(% style="width:115px" %)1.91|(% style="width:115px" %)3.6|(% style="width:162px" %)3.0|5
605 |(% colspan="9" style="width:172px" %)
606 |(% style="width:172px" %)WD80M-07530S-☐☐☐|(% style="width:78px" %)80|(% style="width:86px" %)0.75|(% style="width:100px" %)3000|(% style="width:115px" %)2.39|(% style="width:115px" %)4.4|(% style="width:162px" %)3.0|5|(% rowspan="3" %)Middle
607 |(% style="width:172px" %)WD80M-10025S-☐☐☐|(% style="width:78px" %)80|(% style="width:86px" %)1|(% style="width:100px" %)2500|(% style="width:115px" %)3.82|(% style="width:115px" %)4.6|(% style="width:162px" %)3.0|5
608 |(% style="width:172px" %)WD80M-10030S-☐☐☐|(% style="width:78px" %)80|(% style="width:86px" %)1|(% style="width:100px" %)3000|(% style="width:115px" %)3.18|(% style="width:115px" %)5.8|(% style="width:162px" %)3.0|5
609 |(% colspan="9" style="width:172px" %)
610 |(% style="width:172px" %)WD130M-08515S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)0.85|(% style="width:100px" %)1500|(% style="width:115px" %)5.41|(% style="width:115px" %)4.6|(% style="width:162px" %)3.0|5|(% rowspan="10" %)Middle
611 |(% style="width:172px" %)WD130M-13015S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)1.3|(% style="width:100px" %)1500|(% style="width:115px" %)8.28|(% style="width:115px" %)7.7|(% style="width:162px" %)3.0|5
612 |(% style="width:172px" %)WD130M-18015S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)1.8|(% style="width:100px" %)1500|(% style="width:115px" %)11.46|(% style="width:115px" %)9.8|(% style="width:162px" %)3.0|5
613 |(% style="width:172px" %)WD130M-23015S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)2.3|(% style="width:100px" %)1500|(% style="width:115px" %)14.64|(% style="width:115px" %)12.4|(% style="width:162px" %)3.0|5
614 |(% style="width:172px" %)WD130M-10020S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)1|(% style="width:100px" %)2000|(% style="width:115px" %)4.8|(% style="width:115px" %)6.0|(% style="width:162px" %)3.5|5
615 |(% style="width:172px" %)WD130M-15020S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)1.5|(% style="width:100px" %)2000|(% style="width:115px" %)7.2|(% style="width:115px" %)8.5|(% style="width:162px" %)3.5|5
616 |(% style="width:172px" %)WD130M-20020S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)2|(% style="width:100px" %)2000|(% style="width:115px" %)9.55|(% style="width:115px" %)10|(% style="width:162px" %)3.0|5
617 |(% style="width:172px" %)WD130M-15025S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)1.5|(% style="width:100px" %)2500|(% style="width:115px" %)5.73|(% style="width:115px" %)6.0|(% style="width:162px" %)3.0|5
618 |(% style="width:172px" %)WD130M-26025S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)2.6|(% style="width:100px" %)2500|(% style="width:115px" %)9.93|(% style="width:115px" %)10.5|(% style="width:162px" %)3.0|5
619 |(% style="width:172px" %)WD130M-38025S-☐☐☐|(% style="width:78px" %)130|(% style="width:86px" %)3.8|(% style="width:100px" %)2500|(% style="width:115px" %)14.5|(% style="width:115px" %)16|(% style="width:162px" %)3.0|5
620
621 |**220V motor model**|**Flange mm**|**Power kW**|**Rated speed rpm**|**Rated torque N*m**|**Rated current A**|**Allowable overload multiple**|(((
622 **Pole pairs**
623 )))|(((
624 **Inertia level**
625 )))
626 |WD60H-02030S-☐☐☐|60|0.2|3000|0.64|1.8|3.5|5|(% colspan="1" rowspan="3" %)(((
627 High
628 )))
629 |WD60H-04030S-☐☐☐|60|0.4|3000|1.27|2.8|3.5|5
630 |WD60H-06030S-☐☐☐|60|0.6|3000|1.91|4.0|3.0|5
631 |(% colspan="9" %)
632 |WD80H-07530S-☐☐☐|80|0.75|3000|2.39|4.8|3.0|5|(% colspan="1" rowspan="4" %)(((
633 High
634 )))
635 |WD80H-10020S-☐☐☐|80|1|2000|4.77|4.8|3.0|5
636 |WD80H-10025S-☐☐☐|80|1|2500|3.82|4.8|3.0|5
637 |WD80H-10030S-☐☐☐|80|1|3000|3.2|4.8|3.0|5
638 |(% colspan="9" %)
639 |WD130H-15030S-☐☐☐|130|1.5|3000|4.8|6.0|3.0|5|(((
640 High
641 )))
642
643 |(% style="width:174px" %)**220V motor model**|(% style="width:69px" %)**Flange mm**|(% style="width:86px" %)**Power kW**|(% style="width:125px" %)**Rated speed rpm**|(% style="width:110px" %)**Rated torque N*m**|(% style="width:136px" %)**Rated current A**|(% style="width:156px" %)**Allowable overload multiple**|(% style="width:55px" %)**Pole pairs**|(% style="width:82px" %)**Inertia level**
644 |(% style="width:174px" %)WE60M-04030S-☐☐☐|(% style="width:69px" %)60|(% style="width:86px" %)0.4|(% style="width:125px" %)3000|(% style="width:110px" %)1.27|(% style="width:136px" %)2.6|(% style="width:156px" %)3.0|(% style="width:55px" %)4|(% style="width:82px" %)Middle
645 |(% colspan="9" style="width:174px" %)
646 |(% style="width:174px" %)WE80M-07320S-☐☐☐|(% style="width:69px" %)80|(% style="width:86px" %)0.73|(% style="width:125px" %)2000|(% style="width:110px" %)3.5|(% style="width:136px" %)3.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4|(% rowspan="5" style="width:82px" %)Middle
647 |(% style="width:174px" %)WE80M-07530S-☐☐☐|(% style="width:69px" %)80|(% style="width:86px" %)0.75|(% style="width:125px" %)3000|(% style="width:110px" %)2.39|(% style="width:136px" %)3.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
648 |(% style="width:174px" %)WE80M-10025S-☐☐☐|(% style="width:69px" %)80|(% style="width:86px" %)1|(% style="width:125px" %)2500|(% style="width:110px" %)4.0|(% style="width:136px" %)4.4|(% style="width:156px" %)3.0|(% style="width:55px" %)4
649 |(% style="width:174px" %)WE80M-11030S-☐☐☐|(% style="width:69px" %)80|(% style="width:86px" %)1.1|(% style="width:125px" %)3000|(% style="width:110px" %)3.5|(% style="width:136px" %)4.5|(% style="width:156px" %)3.0|(% style="width:55px" %)4
650 |(% style="width:174px" %)WE80M-12030S-☐☐☐|(% style="width:69px" %)80|(% style="width:86px" %)1.2|(% style="width:125px" %)3000|(% style="width:110px" %)4.0|(% style="width:136px" %)4.5|(% style="width:156px" %)3.0|(% style="width:55px" %)4
651 |(% colspan="9" style="width:174px" %)
652 |(% style="width:174px" %)WE110M-12030S-☐☐☐|(% style="width:69px" %)110|(% style="width:86px" %)1.2|(% style="width:125px" %)3000|(% style="width:110px" %)4.0|(% style="width:136px" %)5.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4|(% rowspan="3" style="width:82px" %)Middle
653 |(% style="width:174px" %)WE110M-15030S-☐☐☐|(% style="width:69px" %)110|(% style="width:86px" %)1.5|(% style="width:125px" %)3000|(% style="width:110px" %)5.0|(% style="width:136px" %)6.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
654 |(% style="width:174px" %)WE110M-18030S-☐☐☐|(% style="width:69px" %)110|(% style="width:86px" %)1.8|(% style="width:125px" %)3000|(% style="width:110px" %)6.0|(% style="width:136px" %)6.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
655 |(% colspan="9" style="width:174px" %)
656 |(% style="width:174px" %)WE130M-15015S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)1.5|(% style="width:125px" %)1500|(% style="width:110px" %)10|(% style="width:136px" %)6.0|(% style="width:156px" %)2.5|(% style="width:55px" %)4|(% rowspan="8" style="width:82px" %)Middle
657 |(% style="width:174px" %)WE130M-23015S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)2.3|(% style="width:125px" %)1500|(% style="width:110px" %)15|(% style="width:136px" %)9.5|(% style="width:156px" %)2.0|(% style="width:55px" %)4
658 |(% style="width:174px" %)WE130M-10025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)1|(% style="width:125px" %)2500|(% style="width:110px" %)4.0|(% style="width:136px" %)4.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
659 |(% style="width:174px" %)WE130M-13025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)1.3|(% style="width:125px" %)2500|(% style="width:110px" %)5.0|(% style="width:136px" %)5.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
660 |(% style="width:174px" %)WE130M-15025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)1.5|(% style="width:125px" %)2500|(% style="width:110px" %)6.0|(% style="width:136px" %)6.0|(% style="width:156px" %)3.0|(% style="width:55px" %)4
661 |(% style="width:174px" %)WE130M-20025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)2|(% style="width:125px" %)2500|(% style="width:110px" %)7.7|(% style="width:136px" %)7.5|(% style="width:156px" %)2.9|(% style="width:55px" %)4
662 |(% style="width:174px" %)WE130M-26025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)2.6|(% style="width:125px" %)2500|(% style="width:110px" %)10|(% style="width:136px" %)10|(% style="width:156px" %)2.5|(% style="width:55px" %)4
663 |(% style="width:174px" %)WE130M-38025S-☐☐☐|(% style="width:69px" %)130|(% style="width:86px" %)3.8|(% style="width:125px" %)2500|(% style="width:110px" %)15|(% style="width:136px" %)13.5|(% style="width:156px" %)2.0|(% style="width:55px" %)4
664
665 |**380V motor model**|**Flange mm**|**Power kW**|**Rated speed rpm**|**Rated torque N*m**|**Rated current A**|**Allowable overload multiple**|**Pole pairs**|**Inertia level**
666 |WD130M-08515T-☐☐☐|130|0.85|1500|5.41|3.1|3.0|5|(% colspan="1" rowspan="5" %)Middle
667 |WD130M-13015T-☐☐☐|130|1.3|1500|8.28|5.1|3.0|5
668 |WD130M-18015T-☐☐☐|130|1.8|1500|11.46|6.3|3.0|5
669 |WD130M-23015T-☐☐☐|130|2.3|1500|14.64|8.5|3.0|5
670 |WD180M-29015T-☐☐☐|180|2.9|1500|18.6|11.8|3.0|5
671
672 |**380V motor model**|**Flange mm**|**Power kW**|**Rated speed rpm**|**Rated torque N*m**|**Rated current A**|**Allowable overload multiple**|(% style="width:78px" %)**Pole pairs**|(% style="width:68px" %)**Inertia level**
673 |WE130M-20025T-☐☐☐|130|2.0|2500|7.7|7.5|2.8|(% style="width:78px" %)4|(% rowspan="6" style="width:68px" %)Middle
674 |WE130M-26025T-☐☐☐|130|2.6|2500|10|6.0|2.5|(% style="width:78px" %)4
675 |WE130M-31015T-☐☐☐|130|3.1|1500|20|11.5|2.5|(% style="width:78px" %)4
676 |WE130M-38025T-☐☐☐|130|3.8|2500|15|8.8|2.0|(% style="width:78px" %)4
677 |WE130M-42020T-☐☐☐|130|4.2|2000|20|8.5|2.0|(% style="width:78px" %)4
678 |WE130M-53030T-☐☐☐|130|5.3|3000|17|11|2.0|(% style="width:78px" %)4
679 |(% colspan="9" %)
680 |WE180M-30015T-☐☐☐|180|3.0|1500|19|7.5|2.5|(% style="width:78px" %)4|(% rowspan="4" style="width:68px" %)Middle
681 |WE180M-43015T-☐☐☐|180|4.3|1500|27|10|2.5|(% style="width:78px" %)4
682 |WE180M-55015T-☐☐☐|180|5.5|1500|35|12|2.0|(% style="width:78px" %)4
683 |WE180M-75015T-☐☐☐|180|7.5|1500|48|20|2.0|(% style="width:78px" %)4
684
685 **Note**: ☐☐☐ Not all motor models include the following categories
686
687 A1F：17-bit single-turn absolute magnetic encoder without brake.
688
689 A1G：17-bit single-turn absolute magnetic encoder with brake.
690
691 C1F：17-bit multi-turn absolute magnetic encoder without brake
692
693 C1G：17-bit multi-turn absolute magnetic encoder with brake.
694
695 D2F：23-bit multi-turn absolute Optical encoder without brake.
696
697 D2G：23-bit multi-turn absolute Optical encoder with brake.
698
699 = **Servo Drive and Motor Matching Table** =
700
701 **Note**: The **red-marked** combination is not recommended.
702
703 |**Control type**|**Voltage level**|**Drive series**|**Drive model**|**Support motor**
704 |(% rowspan="18" %)Pulse type|(% rowspan="12" %)220V|(% rowspan="3" %)VD2F|VD2F-003SA1P|(0.1-0.2)kW
705 |VD2F-010SA1P|(0.2-0.4)kW
706 |VD2F-014SA1P|(((
707 (0.6-0.75)kW
708
709 **(0.85-1.0)kW**
710 )))
711 |(% rowspan="2" %)VD2L|VD2L-010SA1P|(0.2-0.4)kW
712 |VD2L-014SA1P/D|(((
713 (0.6-0.75)kW
714
715 **(0.85-1.0)kW**
716 )))
717 |(% rowspan="2" %)(((
718 VD2 Type A
719 )))|VD2-010SA1G/R/H|(0.2-0.4)kW
720 |VD2-014SA1G/R/H|(((
721 (0.6-0.75)kW
722
723 **(0.85-1.0)kW**
724 )))
725 |(% rowspan="8" %)(((
726 VD2 Type B
727 )))|VD2-016SA1G/R/H|(0.85-1.5)kW
728 |VD2-019SA1G/R/H|(1.5-2.0)kW
729 |VD2-021SA1G/R/H|(2.0-2.5)kW
730 |VD2-025SA1G|(2.5-3.0)kW
731 |VD2-030SA1G|(3.0-4.0)kW
732 |(% rowspan="6" %)380V|VD2-016TA1G|(0.85-1.5)kW
733 |VD2-019TA1G|(1.5-2.0)kW
734 |VD2-021TA1G|(2.0-3.0)kW
735 |(% rowspan="3" %)VD2 Type C|VD2-030TA1G|(3.0-5.0)kW
736 |VD2-040TA1G|(5.0-6.0)kW
737 |VD2-050TA1G|(7.5)kW
738 |(% rowspan="14" %)EtherCAT type|(% rowspan="8" %)220V|(% rowspan="3" %)VD3E Type A|VD3E-003SA1G|(0.1-0.2)kW
739 |VD3E-010SA1G|(0.2-0.4)kW
740 |VD3E-014SA1G|(((
741 (0.6-0.75)kW
742
743 **(0.85-1.0)kW**
744 )))
745 |(% rowspan="8" %)VD3E Type B|VD3E-016SA1G|(0.85-1.5)kW
746 |VD3E-019SA1G|(1.5-2.0)kW
747 |VD3E-021SA1G|(2.0-2.5)kW
748 |VD3E-025SA1G|(2.5-3.0)kW
749 |VD3E-030SA1G|(3.0-4.0)kW
750 |(% rowspan="6" %)380V|VD3E-016TA1G|(0.85-1.5)kW
751 |VD3E-019TA1G|(1.5-2.0)kW
752 |VD3E-021TA1G|(2.0-3.0)kW
753 |(% rowspan="3" %)VD3E Type C|VD3E-030TA1G|(3.0-5.0)kW
754 |VD3E-040TA1G|(5.0-6.0)kW
755 |VD3E-050TA1G|(7.5)kW
756
757 = **Servo Cable Naming Rules** =
758
759 (% style="margin-left:auto; margin-right:auto; width:120px" %)
760 |E|-|J1394|-|R9M|-|3M|X7|-|A1|-|2
761 |①| |②| |③| |④|⑤| |⑥| |⑦
762
763 |①Cable type|E: Encoder adapter cable|(% rowspan="14" %) |(% rowspan="4" %)④Cable length|3M: 3m
764 |(% colspan="2" rowspan="1" %) |5M: 5m
765 |(% rowspan="2" %)②Drive side connector|J1394: 1394 connector|7M: 7m
766 |D15G: DB15 male connector|...
767 |(% colspan="2" rowspan="1" %) |(% colspan="2" rowspan="1" %)
768 |(% rowspan="7" %)③Motor side connector|R9M: 9-core rectangular female connector|(% rowspan="3" %)⑤Number of cores|X5: 5 cores
769 |MC7S: 7-core straight female connector|X7: 7 cores
770 |H28K7M: 7-core 28mm aviation female connector|...
771 |CM10: 11-core 11mm aviation female connector|(% colspan="2" rowspan="1" %)
772 |MC7P: 7-core straight female connector (L2)|(% rowspan="2" %)⑥Wire size|A: 0.2mm/0.14mm
773 |R15M: 15-core rectangular female connector|A1: 0.2mm/0.14mm with battery box
774 |H28J15M: 15-core 28mm aviation female connector|(% colspan="2" rowspan="1" %)
775 |(% colspan="2" rowspan="2" %) |(% rowspan="2" %)⑦Others|1: Ordinary cable
776 |2: High flex cable
777
778 (% style="margin-left:auto; margin-right:auto; width:120px" %)
779 |P|-|U3O1|-|H28J4M|-|5M|X4|-|C|-|1
780 |①| |②| |③| |④|⑤| |⑥| |⑦
781
782 |①Cable type|P: Power adapter cable/brake cable|(% rowspan="20" %) |(% rowspan="6" %)④Cable length|3M: 3m
783 |(% colspan="2" rowspan="1" %) |5M: 5m
784 |(% rowspan="8" %)②Drive side connector|Z3O1: 3-core pin-type cold-pressed terminal and 1-core O-type cold-pressed terminal|6D5M: 6.5m
785 |Z3O3: 3-core pin-type cold-pressed terminal and 3-core O-type cold-pressed terminal|7M: 7m
786 |Z4: 4-core pin-type cold-pressed terminal|10M: 10m
787 |Z4O2: 4-core pin-type cold-pressed terminal and 2-core O-type cold-pressed terminal|...
788 |U3O1: 3-core U-type cold-pressed terminal and 1-core O-type cold-pressed terminal|(% colspan="2" rowspan="1" %)
789 |U3O3: 3-core U-type cold-pressed terminal and 3-core O-type cold-pressed terminal|(% rowspan="4" %)⑤Number of cores|X2: 2 cores
790 |Z6: 6-core pin-type cold-pressed terminal|X4: 4 cores
791 |O2: 2-core O-type cold-pressed terminal|X6: 6 cores
792 |(% colspan="2" rowspan="1" %) |...
793 |(% rowspan="9" %)③Motor side connector|18A6: 6-core 23mm aviation female connector|(% colspan="2" rowspan="1" %)
794 |R4M: 4-core rectangular female connector|(% rowspan="5" %)⑥Wire size|D: 0.5mm
795 |MC4S: 4-core straight female connector|E: 0.75mm
796 |MC6S: 6-core straight female connector|B: 1.0mm
797 |H28J4M: 4-core 28mm aviation female connector|F: 1.5mm
798 |H32J4M: 4-core 32mm aviation female connector|C: 2.5mm
799 |R2M: 2-core rectangular female connector|(% colspan="2" rowspan="1" %)
800 |MC4H: 4-core H-type straight female connector|(% rowspan="2" %)⑦Others|1: Ordinary cable
801 |MC6H: 6-core H-type straight female connector|2: High flex cable
802
803 = **Servo Cable Matching Table** =
804
805 |**Motor model**|**Matching drive**|**Power cable/brake cable**|**Encoder cable**
806 |(% rowspan="6" %)(((
807 WD40M-○○○-☐☐☐
808
809 WD60M-○○○-☐☐☐
810
811 WD60H-○○○-☐☐☐
812
813 WE60M-○○○-☐☐☐
814
815 WD80M-○○○-☐☐☐
816
817 WD80H-○○○-☐☐☐
818
819 WE80M-○○○-☐☐☐
820 )))|(% rowspan="2" %)VD2/VD3E A type|Power cable：P-Z3O1-R4M-*MX4|(% rowspan="3" %)Single-turn：E-J1394-R9M-*MX5-A
821 |(((
822 Power cable：P-Z3O1-R4M-*MX4
823
824 Brake cable：P-O2-R2M-3MX2-D
825 )))
826 |(% rowspan="2" %)(((
827 VD2/VD3E B type
828
829 VD2/VD3E C type
830 )))|Power cable：P-U3O1-R4M-*MX4
831 |(((
832 Power cable：P-U3O1-R4M-*MX4
833
834 Brake cable：P-O2-R2M-3MX2-D
835 )))|(% rowspan="3" %)Multi-turn：E-J1394-R9M-*MX7-A1
836 |(% rowspan="2" %)VD2F/VD2L|Power cable：P-Z4-R4M-*MX4
837 |(((
838 Power cable：P-Z4-R4M-*MX4
839
840 Brake cable：P-O2-R2M-3MX2-D
841 )))
842 |(% rowspan="6" %)(((
843 WD60M-○○○-☐☐☐-L
844
845 WD80M-○○○-☐☐☐-L
846 )))|(% rowspan="2" %)VD2/VD3E A type|Without brake：P-Z3O1-MC4S-*MX4|(% rowspan="3" %)Single-turn：E-J1394-MC7S-*MX5-A
847 |With brake：P-Z3O3-MC6S-*MX6
848 |(% rowspan="2" %)(((
849 VD2/VD3E B type
850
851 VD2/VD3E C type
852 )))|Without brake：P-U3O1-MC4S-*MX4
853 |With brake：P-U3O3-MC6S-*MX6|(% rowspan="3" %)Multi-turn：E-J1394-MC7S-*MX7-A1
854 |(% rowspan="2" %)VD2F/VD2L|Without brake：P-Z4-MC4S-*MX4
855 |With brake：P-Z4O2-MC6S-*MX6
856 |(% rowspan="6" %)(((
857 WD60M-○○○-☐☐☐-L2
858
859 WD80M-○○○-☐☐☐-L2
860 )))|(% rowspan="2" %)VD2/VD3E A type|Without brake：P-Z3O1-MC4S-*MX4|(% rowspan="3" %)Single-turn：E-J1394-MC7P-*MX5-A
861 |With brake：P-Z3O3-MC6S-*MX6
862 |(% rowspan="2" %)(((
863 VD2/VD3E B type
864
865 VD2/VD3E C type
866 )))|Without brake：P-U3O1-MC4S-*MX4
867 |With brake：P-U3O3-MC6S-*MX6|(% rowspan="3" %)Multi-turn：E-J1394-MC7P-*MX7-A1
868 |(% rowspan="2" %)VD2F/VD2L|Without brake：P-Z4-MC4S-*MX4
869 |With brake：P-Z4O2-MC6S-*MX6
870 |(% rowspan="4" %)(((
871 WD60H-○○○-☐☐☐-L2
872
873 WD80H-○○○-☐☐☐-L2
874 )))|(% rowspan="2" %)VD2/VD3E A type|Without brake：P-Z3O1-MC4H-*MX4|(% rowspan="2" %)Single-turn：E-J1394-MC7P-*MX5-A
875 |With brake：P-Z3O3-MC6H-*MX6
876 |(% rowspan="2" %)VD2F/VD2L|Without brake：P-Z4-MC4H-*MX4|(% rowspan="2" %)Multi-turn：E-J1394-MC7P-*MX7-A1
877 |With brake：P-Z4O2-MC6H-*MX6
878 |(% rowspan="6" %)(((
879 WE110M-○○○-☐☐☐
880
881 WE130M-○○○-☐☐☐
882 )))|(% rowspan="2" %)VD2/VD3E A type|Power cable：P-Z3O1-H28J4M-*MX4|(% rowspan="3" %)Single-turn：E-J1394-H28K7M-*MX5-A
883 |Brake cable：No need
884 |(% rowspan="2" %)(((
885 VD2/VD3E B type
886
887 VD2/VD3E C type
888 )))|Power cable：P-U3O1-H28J4M-*MX4
889 |Brake cable：No need|(% rowspan="3" %)Multi-turn：E-J1394-H28K7M-*MX7-A1
890 |(% rowspan="2" %)VD2F/VD2L|Power cable：P-Z4-H28J4M-*MX4
891 |Brake cable：No need
892 |(% rowspan="6" %)(((
893 WD130M-○○○-☐☐☐
894
895 WD130H-○○○-☐☐☐
896 )))|(% rowspan="2" %)VD2/VD3E A type|Without brake：P-Z3O1-18A6-*MX4|(% rowspan="3" %)Single-turn：E-J1394-CM10-*MX5-A
897 |With brake：P-Z3O3-18A6-*MX6
898 |(% rowspan="2" %)(((
899 VD2/VD3E B type
900
901 VD2/VD3E C type
902 )))|Without brake：P-U3O1-18A6-*MX4
903 |With brake：P-U3O3-18A6-*MX6|(% rowspan="3" %)Multi-turn：E-J1394-CM10-*MX7-A1
904 |(% rowspan="2" %)VD2F/VD2L|Without brake：P-Z4-18A6-*MX4
905 |With brake：P-Z4O2-18A6-*MX4
906 |(% rowspan="6" %)WD130M-○○○-☐☐☐-L2|(% rowspan="2" %)VD2/VD3E A type|Without brake：P-Z3O1-18A6-*MX4|(% rowspan="3" %)Single-turn：E-J1394-MC7P-*MX5-A
907 |With brake：P-Z3O3-18A6-*MX6
908 |(% rowspan="2" %)(((
909 VD2/VD3E B type
910
911 VD2/VD3E C type
912 )))|Without brake：P-U3O1-18A6-*MX4
913 |With brake：P-U3O3-18A6-*MX6|(% rowspan="3" %)Multi-turn：E-J1394-MC7P-*MX7-A1
914 |(% rowspan="2" %)VD2F/VD2L|Without brake：P-Z4-18A6-*MX4
915 |With brake：P-Z4O2-18A6-*MX4
916 |(% rowspan="2" %)(((
917 WE180M-○○○-☐☐☐
918
919 WD180M-○○○-☐☐☐
920 )))|(% rowspan="2" %)(((
921 VD2/VD3E B type
922
923 VD2/VD3E C type
924 )))|Power cable：P-U3O1-H32J4M-*MX4|Single-turn：E-J1394-H28K7M-*MX5-A
925 |Brake cable：No need|Multi-turn：E-J1394-H28K7M-*MX7-A1
926
927
928 = **Servo **Input Current Parameter Table =
929
930 |=Servo Drive Output Current (A)|=Servo Drive Output Voltage (V)|=Servo Drive Output Power (W)|=Efficiency|=Power factor|=Input current
931 (single phase) (A)|=Input current
932 (three phase) (A)|=Recommended power cable
933 diameter（mm²）
934 |3|(% colspan="1" rowspan="7" %)220|100|(% colspan="1" rowspan="11" %)0.7|(% rowspan="11" %)0.8|0.90|0.52|0.5
935 |10|400|3.61|2.08|0.75
936 |14|750|6.76|3.91|(((
937 1.5（For single phase）
938
939 1(For three phase)
940 )))
941 |16|1800|16.23|9.37|(((
942 4（For single phase）
943
944 2(For three phase)
945 )))
946 |21|2200|19.84|11.46|(((
947 4（For single phase）
948
949 2.5(For three phase)
950 )))
951 |25|2600|23.45|13.40|(% colspan="1" rowspan="2" %)(((
952 6（For single phase）
953
954 4(For three phase)
955 )))
956 |30|3000|26.79|15.46
957 |21|(% colspan="1" rowspan="4" %)380|3000| |9.04|2
958 |30|4500| |13.57|4
959 |40|6000| |18.09|(% colspan="1" rowspan="2" %)6
960 |50|7500| |22.61