Children of Servo Guide
Last modified by Wecon on 2025/09/03 21:04
Navigation
Table of Contents
- Troubleshooting
- Configuration
- Modify P0-16 in panel
- Use and share of internal multi-position and speed mixed mode
- Multi-turn servos and multiple simultaneous communication timeout problems
- Servo rigidity
- The servo rotates abnormally
- In position mode, external pulse positioning, servo positioning is inaccurate
- When the machine is stopped, the film cutter moves slowly
- Real-time synchronization with PLC curve, follow---requiring high servo response occasions
- Mode switching (speed mode/torque mode)
- Debugging Application
- In the case of only positioning control-servo positioning is inaccurate
- Servo motor vibrates and screams
- For vibration caused by a small probability of mechanical structure
- Too slow servo response affects overall output
- Application occasions of large inertia pulleys-Servo stop instability
- Servo can not stop and rotate back some position
- WECON PLC DVIT to control the Servo stop
- Power calculation of WECON servo brake resistor
- Servo motor selection calculation