Skip to Content
Last modified by Stone Wu on 2022/07/04 02:44
From version 1.1
edited by Stone Wu
on 2022/07/04 10:34
Change comment: There is no comment for this version
To version 2.1
edited by Stone Wu
on 2022/07/04 10:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,7 +8,6 @@
8 8  
9 9  = **2. Process requirements** =
10 10  
11 -
12 12  1. Send the wire. First get a head length, and then clamp the head length through the rotating mechanism, then get the tail length, and rotate at the same time as the tail. Need to cooperate with the speed. Cut off after the tail is finished. Put it on the outlet slot of the chain.
13 13  1. Peel the skin. Peel off the outer skin on both ends of the head/tail.
14 14  1. Peel the inner skin of the tail. Peel off the inner skin of the tail.
... ... @@ -21,19 +21,15 @@
21 21  
22 22  = **3. Solution** =
23 23  
24 -
25 25  The control system mainly adopts the maintenance control touch screen PI3070ie, and the PLC host adopts the maintenance control host LX5V-3624MT+LX3V-4PGB+LX3VEYT*3+VD1 (400W servo)
26 26  
27 -=
28 -**4. Advantages** =
25 += **4. Advantages** =
29 29  
30 30  
31 31  The processing speed and stripping length can be debugged and controlled by the touch screen. The maintenance method is simple and fast, and ordinary employees can also complete the equipment maintenance work. The processing is precise and in place, and the length of wire cutting and stripping is accurate. Do not damage the wire, do not expose the wire, and the riveting pressure is firmly in place to prevent the terminal from falling off.
32 32  
33 -=
34 -**5. Program introduction** =
30 += **5. Program introduction** =
35 35  
36 -
37 37  ~1. IO screen：
38 38  
39 39  (% style="text-align:center" %)