1. Introduction

The casing machine is a machine that feeds the pipe by the feeding shaft, and the rotating shaft rotates 1/8. Then it is cut off, and the wire is manually put into the casing groove for baking.

2. Process

When the disk stops, the pipe feeding structure starts to send the pipe, the pipe feeding stops, the pipe cutter starts to cut the pipe, and then the disk sends the casing to the heating pipe position and inserts it into the product, starts to bake, and then comes out the wire rod finished product.

3. Solution

The control system mainly adopts the HMI PI3050ie, and the PLC adopts LX3V-1616MT.

4. Advantage

The design of the casing machine is very user-friendly. It can be realized by debugging and replacing the corresponding accessories for the length of the casing, specifications, heat-shrinking temperature and time. It only needs one man to step on the pedal to perform the heat-shrinking operation.

5. Program

1. The mainly screen of HMI, which shows the output of product, started, stopped, reset and other operations.

2. This screen is mainly the manual operation of the motor and the operation of the cylinder.

3. This screen is mainly used for parameter operation, etc.

4. This screen mainly displays the automatic part of the PLC program

6. Summary

There are multiple modes to choose from. PLC is used for installment payment. And there are six installments.

7. Video