Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 11.1
edited by Theodore Xu
on 2024/04/02 14:36
Change comment: There is no comment for this version
To version 13.1
edited by Theodore Xu
on 2024/04/02 14:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,8 +7,10 @@
7 7  
8 8  Through the V-NET PC software, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs.
9 9  
10 -== **Remote Download** ==
10 +== **Remote COM Download** ==
11 11  
12 +**COM port**
13 +
12 12  When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
13 13  
14 14  If the virtual serial port is set successfully, the system automatically updates the enabled virtual serial port. Fill in the device information, choose COM1 or COM2 as the communication port. When the information filled in is the same as the PLC, Click the button "Pass-thrrough".