Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 22.1
edited by Theodore Xu
on 2024/04/02 18:20
Change comment: There is no comment for this version
To version 31.1
edited by Joe
on 2024/11/14 15:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.AiXia
1 +XWiki.joe
Content
... ... @@ -5,14 +5,15 @@
5 5  
6 6  = **PLC Download** =
7 7  
8 -Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs.
8 +Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs. There are two ports to accomplish, COM and Ethernet.
9 9  
10 -== **Remote Download** ==
10 +(% class="box infomessage" %)
11 +(((
12 +Note: When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
13 +)))
11 11  
12 -When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
15 +== **COM ** ==
13 13  
14 -**COM port**
15 -
16 16  The descriptions of the remote download page are as follows.
17 17  
18 18  1. **Status. **Display the statuses of the device, including ready to pass-through, pass-through is in progress.
... ... @@ -57,7 +57,8 @@
57 57  [[image:串口穿透.png||height="531" width="882"]]
58 58  )))
59 59  
60 -== **Transport Settings** ==
61 +(% class="wikigeneratedid" id="HTransportSettings" %)
62 +**Transport Settings**
61 61  
62 62  Here is the example of LX5V.
63 63  
... ... @@ -66,6 +66,27 @@
66 66  (% style="text-align:center" %)
67 67  [[image:PLCEditor2串口穿透2.png]]
68 68  
71 +== **Ethernet** ==
72 +
73 +Here is the example of LX5V-N.
74 +
75 +Create a new configuration → choose "Ethernet" for Port→ Set PLC IP and port number
76 +
77 +(% class="box infomessage" %)
78 +(((
79 +Note: IP Address must be PLC IP.
80 +)))
81 +
82 +(% style="text-align:center" %)
83 +[[image:ZWk92Jfkat.png]]
84 +
85 +After setting, click "Start Through"
86 +
87 +(% style="text-align:center" %)
88 +[[image:smuCzGnTUO.png]]
89 +
90 +
91 +
69 69  == [[**PLC upload&download**>>https://docs.we-con.com.cn/bin/view/PLC%20Editor2/2.2PLC%20editor2%20software%20help/#HReadfromPLC]] ==
70 70  
71 71  == **End Through** ==
... ... @@ -76,29 +76,20 @@
76 76  
77 77  == **Download configuration** ==
78 78  
79 -Users could click [[here>>https://www.we-con.com.cn/en/service.html]] to download the software **"PIStudio". **If the account is logged in for the first time, users need to click the Settings button [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]] on the upper left corner of the software to configure the virtual serial port parameters. The COM port used during pass-through is a virtual serial port.  After setting successfully once, there is no need to repeat this step again.
102 +Users could click [[here>>https://www.we-con.com.cn/en/service.html]] to download the software **"PIStudio". **If the account is logged in for the first time, users need to click the Settings button[[image:穿透穿透图标.png||alt="3.png"]] on the upper left corner of the software to configure the virtual serial port parameters. The COM port used during pass-through is a virtual serial port.  After setting successfully once, there is no need to repeat this step again.
80 80  
81 81  (% style="text-align:center" %)
82 -[[image:V-NET_Client_HMI穿透.png]]
105 +[[image:V-NET_Client_HMI串口配置.png]]
83 83  
84 -
85 -
86 86  == **HMI download** ==
87 87  
88 -During the pass-through, the HMI should be online. When the status is ready, and the download configuration is complete, click the button [[image:9-13 1.png]]
109 +click the button (% id="cke_bm_1274S" style="display:none" %) (%%) [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]]，during the pass-through, the HMI should be online. When the status is ready, select the version of PI software to use and click "Start Penetration".
89 89  
90 90  (% style="text-align:center" %)
91 -[[image:9-13.png||class="img-thumbnail"]]
112 +[[image:V-NET_Client_HMI穿透.png]]
92 92  
93 93  (% class="wikigeneratedid" %)
94 -Click "OK", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
115 +Click "Start Through", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
95 95  
96 96  (% style="text-align:center" %)
97 -[[image:9-14.png||class="img-thumbnail"]]
98 -
99 -== **Stop remote** ==
100 -
101 -When the download is complete, the HMI would restart automatically. If users need to download again, click** "Restart" **or** "End remote". **As shown below.
102 -
103 -(% style="text-align:center" %)
104 -[[image:9-15.png||class="img-thumbnail"]]
118 +[[image:HMI 穿透下载.png]]
82JjIg3HMj.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +21.8 KB
Content
HMI 穿透下载.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
V-NET_Client_HMI串口配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
ZWk92Jfkat.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +42.5 KB
Content
smuCzGnTUO.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +24.3 KB
Content