Changes for page 1.8 Remote download

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -21,7 +21,7 @@
21	21	1. **Name. **Set the name of the saved record.
22	22	1. **Communication port. **The communication ports of V-BOX and the device to pass-through
23	23	1. **Virtual port. **The virtual serial port is generated by the PC. After successful penetration, the PLC software connects to the virtual serial port, and then the PLC could be monitored, uploaded/downloaded, etc.
24		-1. **Connection ways **include RS232, RS422, RS485, and Ethernet.
	24	+1. **Connection ways **include RS232, RS422, RS485
25	25	1. **Baud rate. **Select the baud rate corresponding to the configuration of the communication port on the device.
26	26	1. **Stop bit. **Select the communication parameters corresponding to the communication port configuration of the device.
27	27	1. **parity. **Select the communication parameters corresponding to the communication port configuration of the device.
...	...	@@ -68,32 +68,8 @@
68	68	(% style="text-align:center" %)
69	69	[[image:PLCEditor2串口穿透2.png]]
70	70
71		-== **Ethernet** ==
72		-
73		-Here is the example of LX5V-N.
74		-
75		-Create a new configuration → choose "Ethernet" for Port→ Set PLC IP and port number
76		-
77	77	(% class="box infomessage" %)
78	78	(((
79		-Note: IP Address must be PLC IP.
80		-)))
81		-
82		-(% style="text-align:center" %)
83		-[[image:ZWk92Jfkat.png]]
84		-
85		-After setting, click "Start Through"
86		-
87		-(% style="text-align:center" %)
88		-[[image:smuCzGnTUO.png]]
89		-
90		-Read from PLC → input 127.0.0.1 in IP address → Communication test → OK
91		-
92		-(% style="text-align:center" %)
93		-[[image:HFy3ybYzPY.png]]
94		-
95		-(% class="box infomessage" %)
96		-(((
97	97	Note: PLC through can only support one port to communicate .  Using Monitor Edit and download will occupy two ports. Only one of them can be used.
98	98	)))
99	99