Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 30.1
edited by Joe
on 2024/11/14 11:52
Change comment: There is no comment for this version
To version 23.1
edited by Theodore Xu
on 2024/04/02 18:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.AiXia
Content
... ... @@ -5,15 +5,14 @@
5 5  
6 6  = **PLC Download** =
7 7  
8 -Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs. There are two ports to accomplish, COM and Ethernet.
8 +Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs.
9 9  
10 -(% class="box infomessage" %)
11 -(((
12 -Note: When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
13 -)))
10 +== **Remote Download** ==
14 14  
15 -== **COM ** ==
12 +When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
16 16  
14 +**COM port**
15 +
17 17  The descriptions of the remote download page are as follows.
18 18  
19 19  1. **Status. **Display the statuses of the device, including ready to pass-through, pass-through is in progress.
... ... @@ -58,8 +58,7 @@
58 58  [[image:串口穿透.png||height="531" width="882"]]
59 59  )))
60 60  
61 -(% class="wikigeneratedid" id="HTransportSettings" %)
62 -**Transport Settings**
60 +== **Transport Settings** ==
63 63  
64 64  Here is the example of LX5V.
65 65  
... ... @@ -68,8 +68,6 @@
68 68  (% style="text-align:center" %)
69 69  [[image:PLCEditor2串口穿透2.png]]
70 70  
71 -== **Ethernet** ==
72 -
73 73  == [[**PLC upload&download**>>https://docs.we-con.com.cn/bin/view/PLC%20Editor2/2.2PLC%20editor2%20software%20help/#HReadfromPLC]] ==
74 74  
75 75  == **End Through** ==
... ... @@ -85,15 +85,28 @@
85 85  (% style="text-align:center" %)
86 86  [[image:V-NET_Client_HMI串口配置.png]]
87 87  
84 + [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]]
85 +
86 +(% style="text-align:center" %)
87 +[[image:V-NET_Client_HMI穿透.png]]
88 +
89 +
88 88  == **HMI download** ==
89 89  
90 -click the button (% id="cke_bm_1274S" style="display:none" %) (%%) [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]]，during the pass-through, the HMI should be online. When the status is ready, select the version of PI software to use and click "Start Penetration".
92 +During the pass-through, the HMI should be online. When the status is ready, and the download configuration is complete, click the button [[image:9-13 1.png]]
91 91  
92 92  (% style="text-align:center" %)
93 -[[image:V-NET_Client_HMI穿透.png]]
95 +[[image:9-13.png||class="img-thumbnail"]]
94 94  
95 95  (% class="wikigeneratedid" %)
96 -Click "Start Through", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
98 +Click "OK", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
97 97  
98 98  (% style="text-align:center" %)
99 -[[image:HMI 穿透下载.png]]
101 +[[image:9-14.png||class="img-thumbnail"]]
102 +
103 +== **Stop remote** ==
104 +
105 +When the download is complete, the HMI would restart automatically. If users need to download again, click** "Restart" **or** "End remote". **As shown below.
106 +
107 +(% style="text-align:center" %)
108 +[[image:9-15.png||class="img-thumbnail"]]
HMI 穿透下载.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content