Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 31.1
edited by Joe
on 2024/11/14 15:40
Change comment: There is no comment for this version
To version 27.1
edited by Jett
on 2024/09/06 11:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.2454238480
Content
... ... @@ -5,15 +5,14 @@
5 5  
6 6  = **PLC Download** =
7 7  
8 -Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs. There are two ports to accomplish, COM and Ethernet.
8 +Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs.
9 9  
10 -(% class="box infomessage" %)
11 -(((
12 -Note: When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
13 -)))
10 +== **Remote Download** ==
14 14  
15 -== **COM ** ==
12 +When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
16 16  
14 +**COM port**
15 +
17 17  The descriptions of the remote download page are as follows.
18 18  
19 19  1. **Status. **Display the statuses of the device, including ready to pass-through, pass-through is in progress.
... ... @@ -58,8 +58,7 @@
58 58  [[image:串口穿透.png||height="531" width="882"]]
59 59  )))
60 60  
61 -(% class="wikigeneratedid" id="HTransportSettings" %)
62 -**Transport Settings**
60 +== **Transport Settings** ==
63 63  
64 64  Here is the example of LX5V.
65 65  
... ... @@ -68,27 +68,6 @@
68 68  (% style="text-align:center" %)
69 69  [[image:PLCEditor2串口穿透2.png]]
70 70  
71 -== **Ethernet** ==
72 -
73 -Here is the example of LX5V-N.
74 -
75 -Create a new configuration → choose "Ethernet" for Port→ Set PLC IP and port number
76 -
77 -(% class="box infomessage" %)
78 -(((
79 -Note: IP Address must be PLC IP.
80 -)))
81 -
82 -(% style="text-align:center" %)
83 -[[image:ZWk92Jfkat.png]]
84 -
85 -After setting, click "Start Through"
86 -
87 -(% style="text-align:center" %)
88 -[[image:smuCzGnTUO.png]]
89 -
90 -
91 -
92 92  == [[**PLC upload&download**>>https://docs.we-con.com.cn/bin/view/PLC%20Editor2/2.2PLC%20editor2%20software%20help/#HReadfromPLC]] ==
93 93  
94 94  == **End Through** ==
82JjIg3HMj.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -21.8 KB
Content
ZWk92Jfkat.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -42.5 KB
Content
smuCzGnTUO.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content