Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 33.1
edited by Joe
on 2024/11/23 09:06
Change comment: There is no comment for this version
To version 22.1
edited by Theodore Xu
on 2024/04/02 18:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.AiXia
Content
... ... @@ -5,15 +5,14 @@
5 5  
6 6  = **PLC Download** =
7 7  
8 -Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs. There are two ports to accomplish, COM and Ethernet.
8 +Through the V-NET Client, remotely pass-through the V-BOX or ig HMI (the PLC remote download procedure is the same)  to directly control the PLC devices, including upload, download, and monitor PLC programs.
9 9  
10 -(% class="box infomessage" %)
11 -(((
12 -Note: When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
13 -)))
10 +== **Remote Download** ==
14 14  
15 -== **COM ** ==
12 +When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
16 16  
14 +**COM port**
15 +
17 17  The descriptions of the remote download page are as follows.
18 18  
19 19  1. **Status. **Display the statuses of the device, including ready to pass-through, pass-through is in progress.
... ... @@ -58,8 +58,7 @@
58 58  [[image:串口穿透.png||height="531" width="882"]]
59 59  )))
60 60  
61 -(% class="wikigeneratedid" id="HTransportSettings" %)
62 -**Transport Settings**
60 +== **Transport Settings** ==
63 63  
64 64  Here is the example of LX5V.
65 65  
... ... @@ -68,35 +68,6 @@
68 68  (% style="text-align:center" %)
69 69  [[image:PLCEditor2串口穿透2.png]]
70 70  
71 -== **Ethernet** ==
72 -
73 -Here is the example of LX5V-N.
74 -
75 -Create a new configuration → choose "Ethernet" for Port→ Set PLC IP and port number
76 -
77 -(% class="box infomessage" %)
78 -(((
79 -Note: IP Address must be PLC IP.
80 -)))
81 -
82 -(% style="text-align:center" %)
83 -[[image:ZWk92Jfkat.png]]
84 -
85 -After setting, click "Start Through"
86 -
87 -(% style="text-align:center" %)
88 -[[image:smuCzGnTUO.png]]
89 -
90 -Read from PLC → input 127.0.0.1 in IP address → Communication test → OK
91 -
92 -(% style="text-align:center" %)
93 -[[image:HFy3ybYzPY.png]]
94 -
95 -(% class="box infomessage" %)
96 -(((
97 -Note: PLC through can only support one port to communicate .  Using Monitor Edit and download will occupy two ports. Only one of them can be used.
98 -)))
99 -
100 100  == [[**PLC upload&download**>>https://docs.we-con.com.cn/bin/view/PLC%20Editor2/2.2PLC%20editor2%20software%20help/#HReadfromPLC]] ==
101 101  
102 102  == **End Through** ==
... ... @@ -107,20 +107,29 @@
107 107  
108 108  == **Download configuration** ==
109 109  
110 -Users could click [[here>>https://www.we-con.com.cn/en/service.html]] to download the software **"PIStudio". **If the account is logged in for the first time, users need to click the Settings button[[image:穿透穿透图标.png||alt="3.png"]] on the upper left corner of the software to configure the virtual serial port parameters. The COM port used during pass-through is a virtual serial port.  After setting successfully once, there is no need to repeat this step again.
79 +Users could click [[here>>https://www.we-con.com.cn/en/service.html]] to download the software **"PIStudio". **If the account is logged in for the first time, users need to click the Settings button [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]] on the upper left corner of the software to configure the virtual serial port parameters. The COM port used during pass-through is a virtual serial port.  After setting successfully once, there is no need to repeat this step again.
111 111  
112 112  (% style="text-align:center" %)
113 -[[image:V-NET_Client_HMI串口配置.png]]
82 +[[image:V-NET_Client_HMI穿透.png]]
114 114  
84 +
85 +
115 115  == **HMI download** ==
116 116  
117 -click the button (% id="cke_bm_1274S" style="display:none" %) (%%) [[image:V-NET_Client_HMI穿透图标.png||alt="3.png"]]，during the pass-through, the HMI should be online. When the status is ready, select the version of PI software to use and click "Start Penetration".
88 +During the pass-through, the HMI should be online. When the status is ready, and the download configuration is complete, click the button [[image:9-13 1.png]]
118 118  
119 119  (% style="text-align:center" %)
120 -[[image:V-NET_Client_HMI穿透.png]]
91 +[[image:9-13.png||class="img-thumbnail"]]
121 121  
122 122  (% class="wikigeneratedid" %)
123 -Click "Start Through", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
94 +Click "OK", it would prompt a download tool box, select "PC to HMI", then select the ".wmt" file which has been compiled to download the program to the HMI. When the download is complete, the HMI would restart automatically.
124 124  
125 125  (% style="text-align:center" %)
126 -[[image:HMI 穿透下载.png]]
97 +[[image:9-14.png||class="img-thumbnail"]]
98 +
99 +== **Stop remote** ==
100 +
101 +When the download is complete, the HMI would restart automatically. If users need to download again, click** "Restart" **or** "End remote". **As shown below.
102 +
103 +(% style="text-align:center" %)
104 +[[image:9-15.png||class="img-thumbnail"]]
82JjIg3HMj.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -21.8 KB
Content
HFy3ybYzPY.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
HMI 穿透下载.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
HW0RntCgrv.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
V-NET_Client_HMI串口配置.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
ZWk92Jfkat.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -42.5 KB
Content
smuCzGnTUO.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content