Skip to Content

Changes for page 1.8 Remote download

Last modified by Joe on 2024/11/23 09:06
From version 9.1
edited by Theodore Xu
on 2024/04/02 11:51
Change comment: There is no comment for this version
To version 10.1
edited by Theodore Xu
on 2024/04/02 11:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,8 +9,17 @@
9 9  
10 10  == **COM Port** ==
11 11  
12 -Click the setting button [[image:穿透穿透图标.png||alt="3.png"]] of the V-NET Client to create the Pass-through configuration used for PLC downloads. Before use, please make sure that V-BOX communicates normally with PLC, and configure the same Pass-through according to the communication protocol.
13 13  
13 +== **Remote Download** ==
14 +
15 +When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
16 +
17 +If the virtual serial port is set successfully, the system automatically updates the enabled virtual serial port. Fill in the device information, choose COM1 or COM2 as the communication port. When the information filled in is the same as the PLC, Click the button "Pass-thrrough".
18 +
19 +If the Pass-through succeeds, the current status changes to **"running"**, and all the filling information becomes gray and could not be filled, and only the function button **"stop"** is left indicating that the pass-through is successful.
20 +
21 +Click the setting button [[image:穿透穿透图标.png||alt="3.png"]] of the V-NET Client to create the Pass-through configuration. please make sure that V-BOX configuration the same Pass-through according to the communication protocol.
22 +
14 14  (% style="text-align:center" %)
15 15  [[image:串口穿透设置2.png]]
16 16  
... ... @@ -27,14 +27,9 @@
27 27  (% style="text-align:center" %)
28 28  [[image:虚拟串口修改.png]]
29 29  
30 -== **Remote Download** ==
39 +== ==
31 31  
32 -When operating Pass-through, V-BOX and ig HMI should be connected to the network, and ensure normal communication with PLC.
33 33  
34 -If the virtual serial port is set successfully, the system automatically updates the enabled virtual serial port. Fill in the device information, choose COM1 or COM2 as the communication port. When the information filled in is the same as the PLC, Click the button [[image:9.4.png]]
35 -
36 -If the pass-through succeeds, the current status changes to **"running"**, and all the filling information becomes gray and could not be filled, and only the function button **"stop"** is left indicating that the pass-through is successful.
37 -
38 38  (% style="text-align:center" %)
39 39  [[image:9-4.png||height="475" width="505" class="img-thumbnail"]]
40 40