Changes for page 01 Lua Functions

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,4 +1,4 @@
1		-= **1 Interface description** =
	1	+= **1 Interface Description** =
2	2
3	3	== **Data type definition** ==
4	4
...	...	@@ -92,7 +92,7 @@
92	92	1. From the print result, the first line and the second line are successfully called and returns true; the third line fails the call, the error message is translated as: the bar student has been registered, and there is indeed an error in the code.
93	93	1. The fourth line of code uses two variables to receive the return value. The call failed, the first variable stat is nil, and the second variable err stores the error message. Then print it out using print, which is the output of the third line. This example shows how to capture and view the error message.
94	94
95		-== **Modification of print function** ==
	95	+== **Modification of the Print Function** ==
96	96
97	97	For the convenience of remote development, the print data is sent to the front end (web page) by means of network transmission, and the user can see the result of the debug output, because it consumes certain data and occupies the bandwidth of the server (or occupies server resources). So the following restrictions are made.
98	98
...	...	@@ -105,7 +105,9 @@
105	105	In addition, please refer to the front-end documentation for how to use view debugging.
106	106
107	107	(((
108		-= **2 Address operation** =
	108	+= **2 Address Operation** =
	109	+
	110	+
109	109	)))
110	110
111	111	|=16-bit data formal|=HLword|=32-bit data formal|=HLword|= 64-bit data formal|=HLword
...	...	@@ -138,17 +138,20 @@
138	138	43218765
139	139	)))|10
140	140
141		- Table 2-1
	143	+* If HLword enters any other value, it will be treated as invalid.
142	142
143		-(% class="box errormessage" %)
144		-(((
145		-**✎Note: **If HLword enters any other value, it will be treated as invalid.
146		-)))
	145	+ Demo:  Reads a 32-bit floating-point number at position D0 of PLC
147	147
148		-== **addr_getshort(string addr[, number type, number hlword])** ==
149	149
150		-**Function:** Read 16-bit signed decimal address
151	151
	149	+[[image:企业微信截图_20210506180640.png||height="301" width="600" class="img-thumbnail"]]
	150	+
	151	+== **2.1 addr_getshort(string addr[, number type, number hlword])** ==
	152	+
	153	+**Function:**
	154	+
	155	+Read 16-bit signed decimal address
	156	+
152	152	**Parameters:**
153	153
154	154	//addr//: address
...	...	@@ -166,11 +166,13 @@
166	166	Failed: multi
167	167
168	168	(((
169		-== **addr_setshort(string addr, number num[, number type, number hlword])** ==
	174	+== **2.2 addr_setshort(string addr, number num[, number type, number hlword])** ==
170	170	)))
171	171
172		-**Function:** Write 16-bit signed decimal address
	177	+**Function:**
173	173
	179	+Write 16-bit signed decimal address
	180	+
174	174	**Parameters:**
175	175
176	176	//addr//: address
...	...	@@ -188,11 +188,13 @@
188	188	Failed: multi
189	189
190	190	(((
191		-== **addr_getword(string addr[, number type, number hlword])** ==
	198	+== **2.3 addr_getword(string addr[, number type, number hlword])** ==
192	192	)))
193	193
194		-**Function:** Read 16-bit unsigned decimal address
	201	+**Function:**
195	195
	203	+Read 16-bit unsigned decimal address
	204	+
196	196	**Parameters:**
197	197
198	198	//addr//: address
...	...	@@ -208,11 +208,13 @@
208	208	Failed: multi
209	209
210	210	(((
211		-== **addr_setword(string addr, number num[, number type, number hlword])** ==
	220	+== **2.4 addr_setword(string addr, number num[, number type, number hlword])** ==
212	212	)))
213	213
214		-**Function:**Write 16-bit unsigned decimal address
	223	+**Function:**
215	215
	225	+Write 16-bit unsigned decimal address
	226	+
216	216	**Parameters:**
217	217
218	218	//addr//: address
...	...	@@ -230,11 +230,13 @@
230	230	Failed: multi
231	231
232	232	(((
233		-== **addr_getint(string addr[, number type, number hlword])** ==
	244	+== **2.5 addr_getint(string addr[, number type, number hlword])** ==
234	234	)))
235	235
236		-**Function:** Read 32-bit signed decimal address
	247	+**Function:**
237	237
	249	+Read 32-bit signed decimal address
	250	+
238	238	**Parameters:**
239	239
240	240	//addr//: address
...	...	@@ -250,11 +250,13 @@
250	250	Failed: multi
251	251
252	252	(((
253		-== **addr_setint(string addr, number num[, number type, number hlword])** ==
	266	+== **2.6 addr_setint(string addr, number num[, number type, number hlword])** ==
254	254	)))
255	255
256		-**Function:** Write 32-bit signed decimal address
	269	+**Function:**
257	257
	271	+Write 32-bit signed decimal address
	272	+
258	258	**Parameters:**
259	259
260	260	//addr//: address
...	...	@@ -272,11 +272,13 @@
272	272	Failed: multi
273	273
274	274	(((
275		-== **addr_getdword(string addr[, number type, number hlword])** ==
	290	+== **2.7 addr_getdword(string addr[, number type, number hlword])** ==
276	276	)))
277	277
278		-**Function:** Read 32-bit unsigned decimal address
	293	+**Function:**
279	279
	295	+Read 32-bit unsigned decimal address
	296	+
280	280	**Parameters:**
281	281
282	282	//addr//: address
...	...	@@ -292,11 +292,13 @@
292	292	Failed: multi
293	293
294	294	(((
295		-== **addr_setdword(string addr, number num[, number type, number hlword])** ==
	312	+== **2.8 addr_setdword(string addr, number num[, number type, number hlword])** ==
296	296	)))
297	297
298		-**Function:** Write 32-bit unsigned decimal address
	315	+**Function:**
299	299
	317	+Write 32-bit unsigned decimal address
	318	+
300	300	**Parameters:**
301	301
302	302	//addr//: address
...	...	@@ -314,11 +314,13 @@
314	314	Failed: multi
315	315
316	316	(((
317		-== **addr_getbit(string addr[, number type])** ==
	336	+== **2.9 addr_getbit(string addr[, number type])** ==
318	318	)))
319	319
320		-**Function:** Read a bit of the register address
	339	+**Function:**
321	321
	341	+Read a bit of the register address
	342	+
322	322	**Parameters:**
323	323
324	324	//addr//: address
...	...	@@ -334,11 +334,13 @@
334	334	Failed: multi
335	335
336	336	(((
337		-== **addr_setbit(string addr, number num[, number type])** ==
	358	+== **2.10 addr_setbit(string addr, number num[, number type])** ==
338	338	)))
339	339
340		-**Function:** Write a bit of the register address
	361	+**Function:**
341	341
	363	+Write a bit of the register address
	364	+
342	342	**Parameters:**
343	343
344	344	//addr//: address
...	...	@@ -356,11 +356,13 @@
356	356	Failed: multi
357	357
358	358	(((
359		-== **addr_getfloat(string addr[, number type, number hlword])** ==
	382	+== **2.11 addr_getfloat(string addr[, number type, number hlword])** ==
360	360	)))
361	361
362		-**Function:** Read 32-bit floating address
	385	+**Function:**
363	363
	387	+Read 32-bit floating address
	388	+
364	364	**Parameters:**
365	365
366	366	//addr//: address
...	...	@@ -376,11 +376,13 @@
376	376	Failed: multi
377	377
378	378	(((
379		-== **addr_setfloat(string addr, number num[, number type, number hlword])** ==
	404	+== **2.12 addr_setfloat(string addr, number num[, number type, number hlword])** ==
380	380	)))
381	381
382		-**Function:** Write 32-bit floating address
	407	+**Function:**
383	383
	409	+Write 32-bit floating address
	410	+
384	384	**Parameters:**
385	385
386	386	//addr//: address
...	...	@@ -398,11 +398,13 @@
398	398	Failed: multi
399	399
400	400	(((
401		-== **addr_getdouble(string addr[, number type, number hlword])** ==
	428	+== **2.13 addr_getdouble(string addr[, number type, number hlword])** ==
402	402	)))
403	403
404		-**Function:** Read 64-bit floating address
	431	+**Function:**
405	405
	433	+Read 64-bit floating address
	434	+
406	406	**Parameters:**
407	407
408	408	//addr//: address
...	...	@@ -418,11 +418,13 @@
418	418	Failed: multi
419	419
420	420	(((
421		-== **addr_setdouble(string addr, number num[, number type, number hlword])** ==
	450	+== **2.14 addr_setdouble(string addr, number num[, number type, number hlword])** ==
422	422	)))
423	423
424		-**Function:** Write 64-bit floating address
	453	+**Function:**
425	425
	455	+Write 64-bit floating address
	456	+
426	426	**Parameters:**
427	427
428	428	addr: address
...	...	@@ -440,11 +440,13 @@
440	440	Failed: multi
441	441
442	442	(((
443		-== **addr_getstring(string addr, number length[, number type, number hlbyte])** ==
	474	+== **2.15 addr_getstring(string addr, number length[, number type, number hlbyte])** ==
444	444	)))
445	445
446		-**Function:** Read the specified length string from address
	477	+**Function:**
447	447
	479	+Read the specified length string from address
	480	+
448	448	**Parameters:**
449	449
450	450	//addr//: address
...	...	@@ -462,11 +462,13 @@
462	462	Failed: multi
463	463
464	464	(((
465		-== **addr_setstring(string addr, string str[, number type, number hlbyte])** ==
	498	+== **2.16 addr_setstring(string addr, string str[, number type, number hlbyte])** ==
466	466	)))
467	467
468		-**Function:** Write the specified length string to address
	501	+**Function:**
469	469
	503	+Write the specified length string to address
	504	+
470	470	**Parameters:**
471	471
472	472	//addr//: address
...	...	@@ -484,11 +484,13 @@
484	484	Failed: multi
485	485
486	486	(((
487		-== **addr_bmov(string dst, string src, number length)** ==
	522	+== **2.17 addr_bmov(string dst, string src, number length)** ==
488	488	)))
489	489
490		-**Function:** Copy data from source address to destination address
	525	+**Function:**
491	491
	527	+Copy data from source address to destination address
	528	+
492	492	**Parameters:**
493	493
494	494	//dst//: destination address
...	...	@@ -504,11 +504,13 @@
504	504	**Failed: multi**
505	505
506	506	(((
507		-== **addr_fill(string addr, number num, number length)** ==
	544	+== **2.18 addr_fill(string addr, number num, number length)** ==
508	508	)))
509	509
510		-**Function:** Write the same value to consecutive addresses
	547	+**Function:**
511	511
	549	+Write the same value to consecutive addresses
	550	+
512	512	**Parameters:**
513	513
514	514	//addr//: address
...	...	@@ -524,11 +524,13 @@
524	524	Failed: multi
525	525
526	526	(((
527		-== **addr_newnoaddr(string addr, number offset)** ==
	566	+== **2.19 addr_newnoaddr(string addr, number offset)** ==
528	528	)))
529	529
530		-**Function:** Offset address value relative to //addr//
	569	+**Function:**
531	531
	571	+Offset address value relative to //addr//
	572	+
532	532	**Parameters:**
533	533
534	534	//addr//: address
...	...	@@ -542,11 +542,13 @@
542	542	Failed: multi
543	543
544	544	(((
545		-== **addr_newstataddr(string addr, number offset)** ==
	586	+== **2.20 addr_newstataddr(string addr, number offset)** ==
546	546	)))
547	547
548		-**Function:** Offset station number relative to //addr //station number
	589	+**Function:**
549	549
	591	+Offset station number relative to //addr //station number
	592	+
550	550	**Parameters:**
551	551
552	552	//addr//: address
...	...	@@ -559,10 +559,12 @@
559	559
560	560	Failed: multi
561	561
562		-== **addr_gethex64(string addr[, number type, number hlword])** ==
	605	+== **2.21 addr_gethex64(string addr[, number type, number hlword])** ==
563	563
564		-**Function:** Read 64-bit hexadecimal numbers
	607	+**Function:**
565	565
	609	+Read 64-bit hexadecimal numbers
	610	+
566	566	**Parameters:**
567	567
568	568	//addr//: address
...	...	@@ -577,10 +577,12 @@
577	577
578	578	Failed: multi
579	579
580		-== **addr_sethex64(string addr, number num[, number type, number hlword])** ==
	625	+== **2.22 addr_sethex64(string addr, number num[, number type, number hlword])** ==
581	581
582		-**Function:** Write 64-bit hexadecimal addresses
	627	+**Function:**
583	583
	629	+Write 64-bit hexadecimal addresses
	630	+
584	584	**Parameters:**
585	585
586	586	//addr//: address
...	...	@@ -601,11 +601,11 @@
601	601
602	602	Operations on the serial port such as read, write, etc. must use ':' for full mode calls, ie operations on an open serial object.
603	603
604		-**Serial port name and mode**
	651	+**Serial port name and mode:**
605	605
606	606	The serial port configured in the communication configuration window cannot be configured again using the script. RS232 and RS458 (or RS422) can be used simultaneously, but RS422 and RS485 are mutually exclusive.For example, when the communication port is configured with COM1-485, the script can only open COM1-232, but not COM1-485/422. Similarly, when the communication port is configured with COM2-485, the script can only open COM2-232, but not COM2-485.
607	607
608		-Attempting to use a script to open a serial port in an unsupported mode will result in an error directly, as below.
	655	+Attempting to use a script to open a serial port in an unsupported mode will result in an error directly, as below
609	609
610	610	|(((
611	611	local setup = {
...	...	@@ -627,11 +627,13 @@
627	627	1. When the data bit is 8, the maximum value of data transmission is 255 (0xFF), which supports the transmission of any character.
628	628
629	629	(((
630		-== **serial.open(table setup)** ==
	677	+== **3.1 serial.open(table setup)** ==
631	631	)))
632	632
633		-**Function:** Enable one serial port
	680	+**Function:**
634	634
	682	+Enable one serial port
	683	+
635	635	**Parameters:**
636	636
637	637	//Setup// is a Lua table; it needs to contain the following fields
...	...	@@ -665,13 +665,17 @@
665	665	Failed: multi
666	666
667	667	(((
668		-== **serial.close(serial obj)** ==
	717	+== **3.2 serial.close(serial obj)** ==
669	669	)))
670	670
671		-**Function:** Disable the serial port
	720	+**Function:**
672	672
673		-**Parameters: **//Obj //is the object returned by serial.open
	722	+Disable the serial port
674	674
	724	+**Parameters:**
	725	+
	726	+//Obj //is the object returned by serial.open
	727	+
675	675	**Return：**
676	676
677	677	Succeed: true
...	...	@@ -679,11 +679,13 @@
679	679	Failed: multi
680	680
681	681	(((
682		-== **serial:read(number bytes[, number timeout])** ==
	735	+== **3.3 serial:read(number bytes[, number timeout])** ==
683	683	)))
684	684
685		-**Function:** Read the specified byte length serial port data
	738	+**Function:**
686	686
	740	+Read the specified byte length serial port data
	741	+
687	687	**Parameters:**
688	688
689	689	//bytes//: number of bytes
...	...	@@ -697,13 +697,15 @@
697	697	Failed: multi
698	698
699	699	(((
700		-== **serial:write(string data)** ==
	755	+== **3.4 serial:write(string data)** ==
701	701	)))
702	702
703		-**Function:** Write the specified byte length to serial port data
	758	+**Function:**
704	704
705		-**Parameters: **
	760	+Write the specified byte length to serial port data
706	706
	762	+**Parameters:**
	763	+
707	707	//data//: serial port data
708	708
709	709	**Return：**
...	...	@@ -713,11 +713,13 @@
713	713	Failed: multi
714	714
715	715	(((
716		-== **serial:flush([number flag])** ==
	773	+== **3.5 serial:flush([number flag])** ==
717	717	)))
718	718
719		-**Function:** Clear the serial port buffer
	776	+**Function:**
720	720
	778	+Clear the serial port buffer
	779	+
721	721	**Parameters:**
722	722
723	723	//[flag=2]// clear option: 0: read, 1: write, 2: read-write
...	...	@@ -729,13 +729,17 @@
729	729	Failed: multi
730	730
731	731	(((
732		-== **serial:close()** ==
	791	+== **3.6 serial:close()** ==
733	733	)))
734	734
735		-**Function:** Close the serial port object
	794	+**Function:**
736	736
737		-**Parameters:** None
	796	+Close the serial port object
738	738
	798	+**Parameters:**
	799	+
	800	+None
	801	+
739	739	**Return：**
740	740
741	741	Succeed: true
...	...	@@ -752,10 +752,12 @@
752	752
753	753	**QoS value:**
754	754
755		-* 0: Only push messages once, messages may be lost or duplicated. It can be used for environmental sensor data, it doesn't matter if lose a record, because there will be a second push message soon. This method is mainly used for normal APP push, but if the user smart device is not connected when the message is pushed, the message will be discarded, and the smart device will not be received when it is networked again.
756		-* 1: The message is delivered at least once, but the message may be delivered repeatedly.
757		-* 2: The message was delivered exactly once. This level can be used in a billing system. In a billing system, repeated or missing messages can lead to incorrect results. This highest quality message push service can also be used for instant messaging APP pushes, ensuring that users only receive messages once.
	818	+0: Only push messages once, messages may be lost or duplicated. It can be used for environmental sensor data, it doesn't matter if lose a record, because there will be a second push message soon. This method is mainly used for normal APP push, but if the user smart device is not connected when the message is pushed, the message will be discarded, and the smart device will not be received when it is networked again.
758	758
	820	+1: The message is delivered at least once, but the message may be delivered repeatedly.
	821	+
	822	+2: The message was delivered exactly once. This level can be used in a billing system. In a billing system, repeated or missing messages can lead to incorrect results. This highest quality message push service can also be used for instant messaging APP pushes, ensuring that users only receive messages once.
	823	+
759	759	**Retain flag:**
760	760
761	761	0: not reserved;
...	...	@@ -763,11 +763,13 @@
763	763	1: reserved
764	764
765	765	(((
766		-== **mqtt.create(string serverurl, string clientid)** ==
	831	+== **4.1 mqtt.create(string serverurl, string clientid)** ==
767	767	)))
768	768
769		-**Function:** Create an MQTT object
	834	+**Function:**
770	770
	836	+Create an MQTT object
	837	+
771	771	**Parameters:**
772	772
773	773	//serverurl //Server url
...	...	@@ -789,13 +789,17 @@
789	789	Failed: multi
790	790
791	791	(((
792		-== **mqtt.close(mqtt obj)** ==
	859	+== **4.2 mqtt.close(mqtt obj)** ==
793	793	)))
794	794
795		-**Function:** Close the specified MQTT object (if the connected server will be disconnected automatically)
	862	+**Function:**
796	796
797		-**Parameters: **//Obj //is the objeced returned by mqtt.create
	864	+Close the specified MQTT object (if the connected server will be disconnected automatically)
798	798
	866	+**Parameters:**
	867	+
	868	+//Obj //is the objeced returned by mqtt.create
	869	+
799	799	**Return：**
800	800
801	801	Succeed: true
...	...	@@ -803,25 +803,32 @@
803	803	Failed: multi
804	804
805	805	(((
806		-== **mqtt:connect(table conn[, table lwt, table cart])** ==
	877	+== **4.3 mqtt:connect(table conn[, table lwt, table cart])** ==
807	807	)))
808	808
809		-**Function:**Establish a connection to the server
	880	+**Function:**
810	810
	882	+Establish a connection to the server
	883	+
811	811	**Parameters:**
812	812
813	813	//conn //is a Lua table and needs to contain the following fields
814	814
815		-* //string conn.username//, user name
816		-* //string conn.password//, password
817		-* //number [conn.netway=0]//, networking method, if set error number will use Ethernet method
818		-** 0: Ethernet
819		-** 1: WIFI
820		-** 2: 4G
821		-** 3: 2G
822		-* //number [conn.keepalive=60]//, keep connected heartbeat interval, in seconds
823		-* //number [conn.cleansession=1]//, empty the session as described below:
	888	+//string conn.username//, user name
824	824
	890	+//string conn.password//, password
	891	+
	892	+//number [conn.netway=0]//, networking method, if set error number will use Ethernet method
	893	+
	894	+* 0: Ethernet
	895	+* 1: WIFI
	896	+* 2: 4G
	897	+* 3: 2G
	898	+
	899	+//number [conn.keepalive=60]//, keep connected heartbeat interval, in seconds
	900	+
	901	+//number [conn.cleansession=1]//, empty the session as described below:
	902	+
825	825	This function is used to control the behavior when connecting and disconnecting, and the client and server will retain the session information. This information is used to guarantee "at least once" and "accurately once" delivery, as well as the subject of the client subscription, the user can choose to keep or ignore the session message, set as follows:
826	826
827	827	* 1 (Empty): If a session exists and is 1, the previous session messages on the client and server are emptied.
...	...	@@ -829,11 +829,14 @@
829	829
830	830	//lwt// (Last Will and Testament) is a Lua table and needs to contain the following fields
831	831
832		-* //string lwt.topic//, topic
833		-* //string lwt.message//, message
834		-* //number [lwt.qos=0]//, qos value
835		-* //number [lwt.retain=0]//, retain flag
	910	+//string lwt.topic//, topic
836	836
	912	+//string lwt.message//, message
	913	+
	914	+//number [lwt.qos=0]//, qos value
	915	+
	916	+//number [lwt.retain=0]//, retain flag
	917	+
837	837	**Return：**
838	838
839	839	Succeed: true
...	...	@@ -841,13 +841,17 @@
841	841	Failed: multi
842	842
843	843	(((
844		-== **mqtt:disconnect([number timeout])** ==
	925	+== **4.4 mqtt:disconnect([number timeout])** ==
845	845	)))
846	846
847		-**Function:** Disconnect from the MQTT server
	928	+**Function:**
848	848
849		-**Parameters: **//[timeout=10000] //Disconnect waiting timeout, in milliseconds
	930	+Disconnect from the MQTT server
850	850
	932	+**Parameters:**
	933	+
	934	+//[timeout=10000] //Disconnect waiting timeout, in milliseconds
	935	+
851	851	**Return：**
852	852
853	853	Succeed: true
...	...	@@ -855,13 +855,17 @@
855	855	Failed: multi
856	856
857	857	(((
858		-== **mqtt:isconnected()** ==
	943	+== **4.5 mqtt:isconnected()** ==
859	859	)))
860	860
861		-**Function:** Test whether or not a client is currently connected to the MQTT server
	946	+**Function:**
862	862
863		-**Parameters:** None
	948	+Test whether or not a client is currently connected to the MQTT server
864	864
	950	+**Parameters:**
	951	+
	952	+None
	953	+
865	865	**Return：**
866	866
867	867	Succeed: true ~-~-Connected
...	...	@@ -869,11 +869,13 @@
869	869	Failed: false ~-~- Unconnected and other unknowns
870	870
871	871	(((
872		-== **mqtt:subscribe(string topic, number qos)** ==
	961	+== **4.6 mqtt:subscribe(string topic, number qos)** ==
873	873	)))
874	874
875		-**Function: **Subscribe to the topic (before the subscription, the user must first call the connect method to connect to the server)
	964	+**Function:**
876	876
	966	+Subscribe to the topic (before the subscription, the user must first call the connect method to connect to the server)
	967	+
877	877	**Parameters:**
878	878
879	879	//topic//, topic name
...	...	@@ -887,11 +887,13 @@
887	887	Failed: multi
888	888
889	889	(((
890		-== **mqtt:unsubscribe(string topic)** ==
	981	+== **4.7 mqtt:unsubscribe(string topic)** ==
891	891	)))
892	892
893		-**Function:** Unsubscribe topic
	984	+**Function:**
894	894
	986	+Unsubscribe topic
	987	+
895	895	**Parameters:**
896	896
897	897	//topic//, topic name
...	...	@@ -903,11 +903,13 @@
903	903	Failed: multi
904	904
905	905	(((
906		-== **mqtt:publish(string topic, string message, number qos, number retain[, number timeout])** ==
	999	+== **4.8 mqtt:publish(string topic, string message, number qos, number retain[, number timeout])** ==
907	907	)))
908	908
909		-**Function:** Publish message
	1002	+**Function:**
910	910
	1004	+Publish message
	1005	+
911	911	**Parameters:**
912	912
913	913	//topic//, topic name
...	...	@@ -927,13 +927,17 @@
927	927	Failed: multi
928	928
929	929	(((
930		-== **mqtt:close()** ==
	1025	+== **4.9 mqtt:close()** ==
931	931	)))
932	932
933		-**Function:** Close the mqtt object (the connection to the server will be automatically disconnected)
	1028	+**Function:**
934	934
935		-**Parameters:** None
	1030	+Close the mqtt object (the connection to the server will be automatically disconnected)
936	936
	1032	+**Parameters:**
	1033	+
	1034	+None
	1035	+
937	937	**Return：**
938	938
939	939	Succeed: true
...	...	@@ -941,11 +941,13 @@
941	941	Failed: multi
942	942
943	943	(((
944		-== **mqtt:on(string method, function callback)** ==
	1043	+== **4.10 mqtt:on(string method, function callback)** ==
945	945	)))
946	946
947		-**Function:** Register event callback function
	1046	+**Function:**
948	948
	1048	+Register event callback function
	1049	+
949	949	**Parameters:**
950	950
951	951	//method//, It can be message/arrived/offline, these 3 types of events
...	...	@@ -958,17 +958,20 @@
958	958
959	959	Parameter:
960	960
961		-* //Topic//, topic name
962		-* //Message//, content
	1062	+//Topic//, topic name
963	963
964		-**2."arrived" is published by publish, this function will be called after the publication arrives**
	1064	+//Message//, content
965	965
	1066	+**2.**"arrived" is published by publish, this function will be called after the publication arrives
	1067	+
966	966	//Callback// prototype~:// function ()//
967	967
968		-Parameter: None
	1070	+Parameter:
969	969
970		-**3.This function will be called after the "offline" connection is lost**
	1072	+None
971	971
	1074	+**3.**This function will be called after the "offline" connection is lost
	1075	+
972	972	//Callback// prototype~:// function (string cause)//
973	973
974	974	Parameter:
...	...	@@ -982,13 +982,17 @@
982	982	Failed: multi
983	983
984	984	(((
985		-== **mqtt:setup_cfg()** ==
	1089	+== **4.11 mqtt:setup_cfg()** ==
986	986	)))
987	987
988		-**Function:** Cloud mode interface, to obtain MQTT information configured by the cloud platform
	1092	+**Function:**
989	989
990		-**Parameters:** None
	1094	+Cloud mode interface, to obtain MQTT information configured by the cloud platform
991	991
	1096	+**Parameters:**
	1097	+
	1098	+None
	1099	+
992	992	**Return:**
993	993
994	994	//serverurl, clientid, conn, lwt, cart //(5 returns, respectively, server address, client ID, connection table, last word table, certificate table)
...	...	@@ -1006,27 +1006,39 @@
1006	1006	Lua only has a table data structure, so all arrays and key-value objects of json will be returned as a table.
1007	1007
1008	1008	(((
1009		-== **json.encode( lua_object )** ==
	1117	+== **5.1 json.encode( lua_object )** ==
1010	1010	)))
1011	1011
1012		-**Function: **Convert lua data type to json string
	1120	+**Function:**
1013	1013
1014		-**Parameters: **Lua data type (including boolean, number, string, table)
	1122	+Convert lua data type to json string
1015	1015
1016		-**Return：** Json format string
	1124	+**Parameters:**
1017	1017
	1126	+Lua data type (including boolean, number, string, table)
	1127	+
	1128	+**Return：**
	1129	+
	1130	+Json format string
	1131	+
1018	1018	(((
1019		-== **json.decode(string json_string)** ==
	1133	+== **5.2 json.decode(string json_string)** ==
1020	1020	)))
1021	1021
1022		-**Function:** Convert json string to lua data type
	1136	+**Function:**
1023	1023
1024		-**Parameters: **//json_string//, string of json data structure
	1138	+Convert json string to lua data type
1025	1025
1026		-**Return: **Lua data type
	1140	+**Parameters:**
1027	1027
	1142	+//json_string//, string of json data structure
	1143	+
	1144	+**Return：**
	1145	+
	1146	+Lua data type
	1147	+
1028	1028	(((
1029		-== **json.null** ==
	1149	+== **5.3 json.null** ==
1030	1030	)))
1031	1031
1032	1032	**Function:**
...	...	@@ -1033,24 +1033,32 @@
1033	1033
1034	1034	This method is used when assembling json data, which is equivalent to null in json. If the user directly uses json.null() to return the address of the function, it must be valid with the use of encode.
1035	1035
1036		-**Parameters:** None
	1156	+**Parameters:**
1037	1037
1038		-**Return: **None
	1158	+None
1039	1039
	1160	+**Return：**
	1161	+
	1162	+None
	1163	+
1040	1040	= **6 Cloud mode** =
1041	1041
1042	1042	The cloud interface is only used in cloud mode, and V-NET mode is not available.
1043	1043
1044	1044	(((
1045		-== **bns_get_alldata()** ==
	1169	+== **6.1 bns_get_alldata()** ==
1046	1046	)))
1047	1047
1048		-**Function:** Obtain all monitoring points (point table) data configured by the end user
	1172	+**Function:**
1049	1049
1050		-**✎Note: **Assuming there are timing scripts A and B with a period of 1 second, if this function is called in script A, the data will not be obtained if called in script B
	1174	+Obtain all monitoring points (point table) data configured by the end user
1051	1051
1052		-**Parameters:** None
	1176	+Note: Assuming there are timing scripts A and B with a period of 1 second, if this function is called in script A, the data will not be obtained if called in script B
1053	1053
	1178	+**Parameters:**
	1179	+
	1180	+None
	1181	+
1054	1054	**Return:**
1055	1055
1056	1056	Succeed: table two-dimensional array, the structure is as follows
...	...	@@ -1080,11 +1080,13 @@
1080	1080	Failed: //table// empty table
1081	1081
1082	1082	(((
1083		-== **bns_get_config(string from)** ==
	1211	+== **6.2 bns_get_config(string from)** ==
1084	1084	)))
1085	1085
1086		-**Function:** Obtain custom configuration parameters with the specified from type
	1214	+**Function:**
1087	1087
	1216	+Obtain custom configuration parameters with the specified from type
	1217	+
1088	1088	**parameter:**
1089	1089
1090	1090	from type, there are the following two categories, the string must be all lowercase
...	...	@@ -1102,11 +1102,13 @@
1102	1102	Failed~:// table// empty table
1103	1103
1104	1104	(((
1105		-== **bns_get_data(string name, string data)** ==
	1235	+== **6.3 bns_get_data(string name, string data)** ==
1106	1106	)))
1107	1107
1108		-**Function:**write data to the name of the monitoring point
	1238	+**Function:**
1109	1109
	1240	+write data to the name of the monitoring point
	1241	+
1110	1110	**parameter:**
1111	1111
1112	1112	//name //The name of the monitoring point
...	...	@@ -1120,7 +1120,7 @@
1120	1120	Failed: nil
1121	1121
1122	1122	(((
1123		-== **bns_get_data(string name)** ==
	1255	+== **6.4 bns_get_data(string name)** ==
1124	1124	)))
1125	1125
1126	1126	**Function:**
...	...	@@ -1138,13 +1138,17 @@
1138	1138	Failed: nil
1139	1139
1140	1140	(((
1141		-== **bns_get_datadesc()** ==
	1273	+== **6.5 bns_get_datadesc()** ==
1142	1142	)))
1143	1143
1144		-**Function: **Obtain all configured communication ports and monitoring point information
	1276	+**Function:**
1145	1145
1146		-**Parameters:** None
	1278	+Obtain all configured communication ports and monitoring point information
1147	1147
	1280	+**Parameters:**
	1281	+
	1282	+None
	1283	+
1148	1148	**Return:**
1149	1149
1150	1150	Succeed: table three-dimensional array, the structure is as follows
...	...	@@ -1197,13 +1197,17 @@
1197	1197	Failed~:// table// empty table
1198	1198
1199	1199	(((
1200		-== **bns_get_machineinfo()** ==
	1336	+== **6.6 bns_get_machineinfo()** ==
1201	1201	)))
1202	1202
1203		-**Function:** get machine information
	1339	+**Function:**
1204	1204
1205		-**Parameters:** None
	1341	+get machine information
1206	1206
	1343	+**Parameters:**
	1344	+
	1345	+None
	1346	+
1207	1207	**Return:**
1208	1208
1209	1209	Succeed: 3 string type results (model, machine code, software version)
...	...	@@ -1211,11 +1211,13 @@
1211	1211	Failed: nil
1212	1212
1213	1213	(((
1214		-== **bns_get_groupdata(string name)** ==
	1354	+== **6.7 bns_get_groupdata(string name)** ==
1215	1215	)))
1216	1216
1217		-**Function:** Get all monitoring point data under the specified group name
	1357	+**Function:**
1218	1218
	1359	+Get all monitoring point data under the specified group name
	1360	+
1219	1219	**parameter:**
1220	1220
1221	1221	//Name  // group name
...	...	@@ -1227,13 +1227,17 @@
1227	1227	Failed: //table// empty table
1228	1228
1229	1229	(((
1230		-== **bns_get_groupdesc()** ==
	1372	+== **6.8 bns_get_groupdesc()** ==
1231	1231	)))
1232	1232
1233		-**Function:** Get all group information
	1375	+**Function:**
1234	1234
1235		-**Parameters:** None
	1377	+Get all group information
1236	1236
	1379	+**Parameters:**
	1380	+
	1381	+None
	1382	+
1237	1237	**Return:**
1238	1238
1239	1239	Succeed: //table// two-dimensional array, the structure is as follows
...	...	@@ -1247,13 +1247,17 @@
1247	1247	Failed: //table  // empty table
1248	1248
1249	1249	(((
1250		-== **bns_get_onecache(string msg)** ==
	1396	+== **6.9 bns_get_onecache(string msg)** ==
1251	1251	)))
1252	1252
1253		-**Function:** Save a message to the cache file, which can be stored after power failure. Store up to 2000 items, delete the old and save the new in a rolling manner when it is full.
	1399	+**Function:**
1254	1254
1255		-**Parameters: **//msg// String
	1401	+Save a message to the cache file, which can be stored after power failure. Store up to 2000 items, delete the old and save the new in a rolling manner when it is full.
1256	1256
	1403	+**Parameters:**
	1404	+
	1405	+//msg// String
	1406	+
1257	1257	**Return:**
1258	1258
1259	1259	Succeed: true
...	...	@@ -1261,13 +1261,17 @@
1261	1261	Failed: nil
1262	1262
1263	1263	(((
1264		-== **bns_get_allcache()** ==
	1414	+== **6.10 bns_get_allcache()** ==
1265	1265	)))
1266	1266
1267		-**Function:** Get all the cached content (once the internal cache file will be emptied)
	1417	+**Function:**
1268	1268
1269		-**Parameters:** None
	1419	+Get all the cached content (once the internal cache file will be emptied)
1270	1270
	1421	+**Parameters:**
	1422	+
	1423	+None
	1424	+
1271	1271	**Return:**
1272	1272
1273	1273	Succeed: //table// one-dimensional array
...	...	@@ -1295,210 +1295,182 @@
1295	1295	Network communication includes Http request interface, this document does not provide interface description, please refer to the online document for how to use it.
1296	1296
1297	1297	(((
1298		-== **http request** ==
	1452	+== **7.1 http request** ==
1299	1299	)))
1300	1300
1301	1301	[[http:~~/~~/w3.impa.br/~~~~diego/software/luasocket/http.html#request>>url:http://w3.impa.br/~~diego/software/luasocket/http.html#request]]
1302	1302
1303		-== **https request** ==
	1457	+(((
	1458	+= **8 Internal register** =
	1459	+)))
1304	1304
1305		-Example：
	1461	+The internal registers of the box are divided into bit addresses and word addresses, which can be accessed in two ways (taking HDW as an example):
1306	1306
1307		-{{code language="LUA"}}
1308		-local json = require("json")
	1463	+**~1. **Access by word, prefix @W_HDW,
1309	1309
1310		-local https = require("https")
	1465	+For example: @W_HDW0 represents the first word of the system data area, @W_HDW1 represents the second word of the system data area.
1311	1311
1312		-functions https_demo.main()
	1467	+**2. **Access in bit mode, the prefix is @B_HDX, the number in front of "." indicates the number of the word, and the number behind is the bit number of the word.
1313	1313
1314		-local url = "https://XXXXXXXXXXXXXXXXXXXXXXXXXX"
	1469	+For example: @B_HDX1020.12, its meaning is to access the system data area in bit mode, the specific location is the 13th bit of the 1020th word.
1315	1315
1316		-local body = {}
	1471	+**✎Note: **
1317	1317
1318		-body["XXXXXX"] = "XXXXX"
	1473	+**~1. **The address in @B_HDX is taken from the word in @W_HDW, so pay special attention when using the address.
1319	1319
1320		-body["XXXXXXX"] = "XXXXXXXXXXX"
	1475	+For example, @B_HDX1020.12 is to access the 13th bit of the 1020th word. The value of this bit is the same as the word obtained by @W_HDW001020. The 13th bit of this word is actually the same bit as @B_HDX1020.12.
1321	1321
1322		-local bodyJson = json.encode(body)
	1477	+**2.**The address of the bit address @B_HDX has a decimal point, while the word address is an integer.
1323	1323
1324		-local header = {}
	1479	+(((
	1480	+== **8.1 Data storage area（HDW/HDX）** ==
	1481	+)))
1325	1325
1326		-header["content-type"] = "application/json"
	1483	+The system storage area (HDW) of the V-BOX is used to store temporary data:
1327	1327
1328		-local result_table, code, headers, status = https.request(url,
	1485	+~1. Access by word, the number range is: "@W_HDW0"-"@W_HDW299999".
1329	1329
1330		-bodyJson)
	1487	+2. Access in bit mode, the number range is: "@B_HDX0.0"-"@B_HDX299999.15".
1331	1331
1332		-if code == 200 then
	1489	+(((
	1490	+== **8.2 Special data area (HSW/HSX)** ==
	1491	+)))
1333	1333
1334		-print("https suc")
	1493	+**✎Note: **
1335	1335
1336		-return true
	1495	+//HSW// is a system special register, so please refer to the system special register table during use. Do not use addresses that are not mentioned in the table, and use the addresses stated in the table with caution (example: restart ("@W_HSW0") Writing a value of 1 will cause V-BOX to restart).
1337	1337
1338		-else
	1497	+//Without any conditions. Direct use ("@W_HSW0") will cause the V-BOX to restart continuously.// When using ("@W_HSW0") address, please add judgment conditions, such as: connection to MQTT fails, there is no network, the value of a PLC address meets the condition or counts to a certain value.
1339	1339
1340		-print("https fail")
	1499	+1.The system data area (HSW) of the box is used for system special registers (system reserved). Use //addr_getword// to obtain the following register information:
1341	1341
1342		-return nil
	1501	+(% class="table-bordered" %)
	1502	+|address|function|Read and write status: read only, write only, read and write
	1503	+|@W_HSW0|restart|read and write
	1504	+|@W_HSW1|Box time: year|read and write
	1505	+|@W_HSW2|Box time: month|read and write
	1506	+|@W_HSW3|Box time: day|read and write
	1507	+|@W_HSW4|Box time: hour|read and write
	1508	+|@W_HSW5|Box time: minute|read and write
	1509	+|@W_HSW6|Box time: second|read and write
	1510	+|@W_HSW7|Box time: week|read and write
	1511	+|@W_HSW8|Ethernet IP1|read only
	1512	+|@W_HSW9|Ethernet IP2|read only
	1513	+|@W_HSW10|Ethernet IP3|read only
	1514	+|@W_HSW11|Ethernet IP4|read only
	1515	+|@W_HSW12|Ethernet Mask 1|read only
	1516	+|@W_HSW13|Ethernet Mask 2|read only
	1517	+|@W_HSW14|Ethernet Mask 3|read only
	1518	+|@W_HSW15|Ethernet Mask 4|read only
	1519	+|@W_HSW16|Ethernet Gateway 1|read only
	1520	+|@W_HSW17|Ethernet Gateway 2|read only
	1521	+|@W_HSW18|Ethernet Gateway 3|read only
	1522	+|@W_HSW19|Ethernet Gateway 4|read only
	1523	+|@W_HSW21|Ethernet MAC1|read only
	1524	+|@W_HSW22|Ethernet MAC2|read only
	1525	+|@W_HSW23|Ethernet MAC3|read only
	1526	+|@W_HSW24|Ethernet MAC4|read only
	1527	+|@W_HSW25|Ethernet MAC3|read only
	1528	+|@W_HSW26|Ethernet MAC4|read only
	1529	+|@W_HSW128|WIFI IP1|read only
	1530	+|@W_HSW129|WIFI IP2|read only
	1531	+|@W_HSW130|WIFI IP3|read only
	1532	+|@W_HSW131|WIFI IP4|read only
	1533	+|@W_HSW132|WIFI Mask 1|read only
	1534	+|@W_HSW133|WIFI Mask 2|read only
	1535	+|@W_HSW134|WIFI Mask 3|read only
	1536	+|@W_HSW135|WIFI Mask 4|read only
	1537	+|@W_HSW136|WIFI Gateway 1|read only
	1538	+|@W_HSW137|WIFI Gateway 2|read only
	1539	+|@W_HSW138|WIFI Gateway 3|read only
	1540	+|@W_HSW139|WIFI Gateway 4|read only
	1541	+|@W_HSW140|WIFI MAC1|read only
	1542	+|@W_HSW141|WIFI MAC2|read only
	1543	+|@W_HSW142|WIFI MAC3|read only
	1544	+|@W_HSW143|WIFI MAC4|read only
	1545	+|@W_HSW144|WIFI MAC5|read only
	1546	+|@W_HSW145|WIFI MAC6|read only
	1547	+|@W_HSW146|WIFI Signal value|read only
	1548	+|@W_HSW148|4G IP1|read only
	1549	+|@W_HSW149|4G IP2|read only
	1550	+|@W_HSW150|4G IP3|read only
	1551	+|@W_HSW151|4G IP4|read only
	1552	+|@W_HSW152|4G Mask 1|read only
	1553	+|@W_HSW153|4G Mask 2|read only
	1554	+|@W_HSW154|4G Mask 3|read only
	1555	+|@W_HSW155|4G Mask 4|read only
	1556	+|@W_HSW156|4G Gateway 1|read only
	1557	+|@W_HSW157|4G Gateway 2|read only
	1558	+|@W_HSW158|4G Gateway 3|read only
	1559	+|@W_HSW159|4G Gateway 4|read only
	1560	+|@W_HSW160|4G MAC1|read only
	1561	+|@W_HSW161|4G MAC2|read only
	1562	+|@W_HSW162|4G MAC3|read only
	1563	+|@W_HSW163|4G MAC4|read only
	1564	+|@W_HSW164|4G MAC5|read only
	1565	+|@W_HSW165|4G MAC6|read only
	1566	+|@W_HSW166|4G Signal value|read only
1343	1343
1344		-end
	1568	+2. Other
1345	1345
1346		-end
1347		-{{/code}}
	1570	+2.1 Access password: addr_getstring("@W_HSW27", 16)
1348	1348
1349		-(((
1350		-= **8 Internal register** =
1351		-)))
	1572	+2.2 Machine code: addr_getstring("@W_HSW60", 64)
1352	1352
1353		-The internal registers of the box are divided into bit addresses and word addresses, which can be accessed in two ways (taking HDW as an example):
	1574	+2.3 Positioning method (@W_HSW167): (read only)
1354	1354
1355		-**Access by word, prefix @W_HDW.**
	1576	+~1. Latitude and longitude
1356	1356
1357		-For example: @W_HDW0 represents the first word of the system data area, @W_HDW1 represents the second word of the system data area.
	1578	+Longitude: addr_getdouble("@W_HSW168") (read only)
1358	1358
1359		-**Access in bit mode, the prefix is @B_HDX, the number in front of "." indicates the number of the word, and the number behind is the bit number of the word.**
	1580	+Latitude: addr_getdouble("@W_HSW172") (read only)
1360	1360
1361		-For example: @B_HDX1020.12, its meaning is to access the system data area in bit mode, the specific location is the 13th bit of the 1020th word.
	1582	+2. Base station positioning
1362	1362
1363		-(% class="box infomessage" %)
1364		-(((
1365		-**✎Note: **
	1584	+LAC: addr_getdword("@W_HSW168") (read only)
1366	1366
1367		-* The address in @B_HDX is taken from the word in @W_HDW, so pay special attention when using the address.
1368		-** For example, @B_HDX1020.12 is to access the 13th bit of the 1020th word. The value of this bit is the same as the word obtained by @W_HDW001020. The 13th bit of this word is actually the same bit as @B_HDX1020.12.
1369		-* The address of the bit address @B_HDX has a decimal point, while the word address is an integer.
1370		-)))
	1586	+CI: addr_getdword("@W_HSW172") (read only)
1371	1371
	1588	+2.4 Convert base station to latitude and longitude via API
1372	1372
	1590	+Longitude: addr_getdouble("@W_HSW187") (read only)
1373	1373
1374		-(((
1375		-== **Data storage area（HDW/HDX）** ==
1376		-)))
	1592	+Latitude: addr_getdouble("@W_HSW183") (read only)
1377	1377
1378		-The system storage area (HDW) of the V-BOX is used to store temporary data:
	1594	+2.5 Operator information: addr_getdword("@W_HSW181") (read only)
1379	1379
1380		-1. Access by word, the number range is: "@W_HDW0"-"@W_HDW299999".
1381		-1. Access in bit mode, the number range is: "@B_HDX0.0"-"@B_HDX299999.15".
	1596	+2.6 Networking mode: addr_getword("@W_HSW177") (read only)
1382	1382
1383		-(((
1384		-== **8.2 Special data area (HSW/HSX)** ==
	1598	+0: Ethernet, 1: WIFI, 2: 4G, 3: 2G
1385	1385
1386		-(% class="box infomessage" %)
1387		-(((
1388		-**✎Note: **
	1600	+2.7 Map fence flag: addr_getword("@W_HSW178") (read only)
1389	1389
1390		-* //HSW// is a system special register, so please refer to the system special register table during use. Do not use addresses that are not mentioned in the table, and use the addresses stated in the table with caution (example: restart ("@W_HSW0") Writing a value of 1 will cause V-BOX to restart).
1391		-* //Without any conditions. Direct use ("@W_HSW0") will cause the V-BOX to restart continuously.// When using ("@W_HSW0") address, please add judgment conditions, such as: connection to MQTT fails, there is no network, the value of a PLC address meets the condition or counts to a certain value.
1392		-)))
1393		-)))
	1602	+0: No map fence is drawn
1394	1394
1395		-The system data area (HSW) of the box is used for system special registers (system reserved). Use //addr_getword// to obtain the following register information:
	1604	+1: Draw a map fence and the box is in the fence
1396	1396
1397		-(% class="table-bordered" %)
1398		-|=(% style="width: 151px;" %)address|=(% style="width: 169px;" %)function|=(% style="width: 456px;" %)Read and write status: read only, write only, read and write
1399		-|(% style="width:151px" %)@W_HSW0|(% style="width:169px" %)restart|(% style="width:456px" %)read and write
1400		-|(% style="width:151px" %)@W_HSW1|(% style="width:169px" %)Box time: year|(% style="width:456px" %)read and write
1401		-|(% style="width:151px" %)@W_HSW2|(% style="width:169px" %)Box time: month|(% style="width:456px" %)read and write
1402		-|(% style="width:151px" %)@W_HSW3|(% style="width:169px" %)Box time: day|(% style="width:456px" %)read and write
1403		-|(% style="width:151px" %)@W_HSW4|(% style="width:169px" %)Box time: hour|(% style="width:456px" %)read and write
1404		-|(% style="width:151px" %)@W_HSW5|(% style="width:169px" %)Box time: minute|(% style="width:456px" %)read and write
1405		-|(% style="width:151px" %)@W_HSW6|(% style="width:169px" %)Box time: second|(% style="width:456px" %)read and write
1406		-|(% style="width:151px" %)@W_HSW7|(% style="width:169px" %)Box time: week|(% style="width:456px" %)read and write
1407		-|(% style="width:151px" %)@W_HSW8|(% style="width:169px" %)Ethernet IP1|(% style="width:456px" %)read only
1408		-|(% style="width:151px" %)@W_HSW9|(% style="width:169px" %)Ethernet IP2|(% style="width:456px" %)read only
1409		-|(% style="width:151px" %)@W_HSW10|(% style="width:169px" %)Ethernet IP3|(% style="width:456px" %)read only
1410		-|(% style="width:151px" %)@W_HSW11|(% style="width:169px" %)Ethernet IP4|(% style="width:456px" %)read only
1411		-|(% style="width:151px" %)@W_HSW12|(% style="width:169px" %)Ethernet Mask 1|(% style="width:456px" %)read only
1412		-|(% style="width:151px" %)@W_HSW13|(% style="width:169px" %)Ethernet Mask 2|(% style="width:456px" %)read only
1413		-|(% style="width:151px" %)@W_HSW14|(% style="width:169px" %)Ethernet Mask 3|(% style="width:456px" %)read only
1414		-|(% style="width:151px" %)@W_HSW15|(% style="width:169px" %)Ethernet Mask 4|(% style="width:456px" %)read only
1415		-|(% style="width:151px" %)@W_HSW16|(% style="width:169px" %)Ethernet Gateway 1|(% style="width:456px" %)read only
1416		-|(% style="width:151px" %)@W_HSW17|(% style="width:169px" %)Ethernet Gateway 2|(% style="width:456px" %)read only
1417		-|(% style="width:151px" %)@W_HSW18|(% style="width:169px" %)Ethernet Gateway 3|(% style="width:456px" %)read only
1418		-|(% style="width:151px" %)@W_HSW19|(% style="width:169px" %)Ethernet Gateway 4|(% style="width:456px" %)read only
1419		-|(% style="width:151px" %)@W_HSW21|(% style="width:169px" %)Ethernet MAC1|(% style="width:456px" %)read only
1420		-|(% style="width:151px" %)@W_HSW22|(% style="width:169px" %)Ethernet MAC2|(% style="width:456px" %)read only
1421		-|(% style="width:151px" %)@W_HSW23|(% style="width:169px" %)Ethernet MAC3|(% style="width:456px" %)read only
1422		-|(% style="width:151px" %)@W_HSW24|(% style="width:169px" %)Ethernet MAC4|(% style="width:456px" %)read only
1423		-|(% style="width:151px" %)@W_HSW25|(% style="width:169px" %)Ethernet MAC3|(% style="width:456px" %)read only
1424		-|(% style="width:151px" %)@W_HSW26|(% style="width:169px" %)Ethernet MAC4|(% style="width:456px" %)read only
1425		-|(% style="width:151px" %)@W_HSW128|(% style="width:169px" %)WIFI IP1|(% style="width:456px" %)read only
1426		-|(% style="width:151px" %)@W_HSW129|(% style="width:169px" %)WIFI IP2|(% style="width:456px" %)read only
1427		-|(% style="width:151px" %)@W_HSW130|(% style="width:169px" %)WIFI IP3|(% style="width:456px" %)read only
1428		-|(% style="width:151px" %)@W_HSW131|(% style="width:169px" %)WIFI IP4|(% style="width:456px" %)read only
1429		-|(% style="width:151px" %)@W_HSW132|(% style="width:169px" %)WIFI Mask 1|(% style="width:456px" %)read only
1430		-|(% style="width:151px" %)@W_HSW133|(% style="width:169px" %)WIFI Mask 2|(% style="width:456px" %)read only
1431		-|(% style="width:151px" %)@W_HSW134|(% style="width:169px" %)WIFI Mask 3|(% style="width:456px" %)read only
1432		-|(% style="width:151px" %)@W_HSW135|(% style="width:169px" %)WIFI Mask 4|(% style="width:456px" %)read only
1433		-|(% style="width:151px" %)@W_HSW136|(% style="width:169px" %)WIFI Gateway 1|(% style="width:456px" %)read only
1434		-|(% style="width:151px" %)@W_HSW137|(% style="width:169px" %)WIFI Gateway 2|(% style="width:456px" %)read only
1435		-|(% style="width:151px" %)@W_HSW138|(% style="width:169px" %)WIFI Gateway 3|(% style="width:456px" %)read only
1436		-|(% style="width:151px" %)@W_HSW139|(% style="width:169px" %)WIFI Gateway 4|(% style="width:456px" %)read only
1437		-|(% style="width:151px" %)@W_HSW140|(% style="width:169px" %)WIFI MAC1|(% style="width:456px" %)read only
1438		-|(% style="width:151px" %)@W_HSW141|(% style="width:169px" %)WIFI MAC2|(% style="width:456px" %)read only
1439		-|(% style="width:151px" %)@W_HSW142|(% style="width:169px" %)WIFI MAC3|(% style="width:456px" %)read only
1440		-|(% style="width:151px" %)@W_HSW143|(% style="width:169px" %)WIFI MAC4|(% style="width:456px" %)read only
1441		-|(% style="width:151px" %)@W_HSW144|(% style="width:169px" %)WIFI MAC5|(% style="width:456px" %)read only
1442		-|(% style="width:151px" %)@W_HSW145|(% style="width:169px" %)WIFI MAC6|(% style="width:456px" %)read only
1443		-|(% style="width:151px" %)@W_HSW146|(% style="width:169px" %)WIFI Signal value|(% style="width:456px" %)read only
1444		-|(% style="width:151px" %)@W_HSW148|(% style="width:169px" %)4G IP1|(% style="width:456px" %)read only
1445		-|(% style="width:151px" %)@W_HSW149|(% style="width:169px" %)4G IP2|(% style="width:456px" %)read only
1446		-|(% style="width:151px" %)@W_HSW150|(% style="width:169px" %)4G IP3|(% style="width:456px" %)read only
1447		-|(% style="width:151px" %)@W_HSW151|(% style="width:169px" %)4G IP4|(% style="width:456px" %)read only
1448		-|(% style="width:151px" %)@W_HSW152|(% style="width:169px" %)4G Mask 1|(% style="width:456px" %)read only
1449		-|(% style="width:151px" %)@W_HSW153|(% style="width:169px" %)4G Mask 2|(% style="width:456px" %)read only
1450		-|(% style="width:151px" %)@W_HSW154|(% style="width:169px" %)4G Mask 3|(% style="width:456px" %)read only
1451		-|(% style="width:151px" %)@W_HSW155|(% style="width:169px" %)4G Mask 4|(% style="width:456px" %)read only
1452		-|(% style="width:151px" %)@W_HSW156|(% style="width:169px" %)4G Gateway 1|(% style="width:456px" %)read only
1453		-|(% style="width:151px" %)@W_HSW157|(% style="width:169px" %)4G Gateway 2|(% style="width:456px" %)read only
1454		-|(% style="width:151px" %)@W_HSW158|(% style="width:169px" %)4G Gateway 3|(% style="width:456px" %)read only
1455		-|(% style="width:151px" %)@W_HSW159|(% style="width:169px" %)4G Gateway 4|(% style="width:456px" %)read only
1456		-|(% style="width:151px" %)@W_HSW160|(% style="width:169px" %)4G MAC1|(% style="width:456px" %)read only
1457		-|(% style="width:151px" %)@W_HSW161|(% style="width:169px" %)4G MAC2|(% style="width:456px" %)read only
1458		-|(% style="width:151px" %)@W_HSW162|(% style="width:169px" %)4G MAC3|(% style="width:456px" %)read only
1459		-|(% style="width:151px" %)@W_HSW163|(% style="width:169px" %)4G MAC4|(% style="width:456px" %)read only
1460		-|(% style="width:151px" %)@W_HSW164|(% style="width:169px" %)4G MAC5|(% style="width:456px" %)read only
1461		-|(% style="width:151px" %)@W_HSW165|(% style="width:169px" %)4G MAC6|(% style="width:456px" %)read only
1462		-|(% style="width:151px" %)@W_HSW166|(% style="width:169px" %)4G Signal value|(% style="width:456px" %)read only
	1606	+2: Draw a map fence and the box is not in the fence
1463	1463
1464		-**Others**
	1608	+2.8 SIM card status addr_getword("@W_HSW179") (read only)
1465	1465
1466		-* Access password: addr_getstring("@W_HSW27", 16)
1467		-* Machine code: addr_getstring("@W_HSW60", 64)
1468		-* Positioning method (@W_HSW167): (read only)
1469		-** Latitude and longitude
1470		-*** Longitude: addr_getdouble("@W_HSW168") (read only)
1471		-*** Latitude: addr_getdouble("@W_HSW172") (read only)
1472		-** Base station positioning
1473		-*** LAC: addr_getdword("@W_HSW168") (read only)
1474		-*** CI: addr_getdword("@W_HSW172") (read only)
1475		-* Convert base station to latitude and longitude via API
1476		-** Longitude: addr_getdouble("@W_HSW187") (read only)
1477		-** Latitude: addr_getdouble("@W_HSW183") (read only)
1478		-* Operator information: addr_getdword("@W_HSW181") (read only)
1479		-* Networking mode: addr_getword("@W_HSW177") (read only)
1480		-** 0: Ethernet
1481		-** 1: WIFI
1482		-** 2: 4G
1483		-** 3: 2G
1484		-* Map fence flag: addr_getword("@W_HSW178") (read only)
1485		-** 0: No map fence is drawn
1486		-** 1: Draw a map fence and the box is in the fence
1487		-** 2: Draw a map fence and the box is not in the fence
1488		-* SIM card status addr_getword("@W_HSW179") (read only)
1489		-** 1: No card detected
1490		-** 2: Card insertion detected
1491		-** 3: The card status is abnormal
1492		-* MQTT status addr_getword("@W_HSW180") (read only)
1493		-** 1: online, 2: offline
1494		-* IO interface, X is read only, Y is read and write (H series)
1495		-** addr_getbit(addr1), addr_setbit(addr2)
1496		-** addr1:"@B_Y0" "@B_Y1" "@B_X0" "@B_X1"
1497		-** addr2:"@B_Y0" "@B_Y1"
1498		-* Obtaining IMEI (read only)
1499		-*
1500		-* Obtaining ICCID (read only)
	1610	+1: No card detected
1501	1501
	1612	+2: Card insertion detected
	1613	+
	1614	+3: The card status is abnormal
	1615	+
	1616	+2.9 MQTT status addr_getword("@W_HSW180") (read only)
	1617	+
	1618	+1: online, 2: offline
	1619	+
	1620	+2.10 IO interface, X is read only, Y is read and write (H series)
	1621	+
	1622	+addr_getbit(addr1), addr_setbit(addr2)
	1623	+
	1624	+addr1:"@B_Y0" "@B_Y1" "@B_X0" "@B_X1"
	1625	+
	1626	+addr2:"@B_Y0" "@B_Y1"
	1627	+
1502	1502	(((
1503	1503	= **9 General Functions** =
1504	1504	)))