Skip to Content

Changes for page 01 Lua Functions

Last modified by Theodore Xu on 2023/10/26 10:51
From version 5.17
edited by Stone Wu
on 2022/07/12 09:55
Change comment: (Autosaved)
To version 5.28
edited by Stone Wu
on 2022/07/12 10:35
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -1370,7 +1370,6 @@
1370 1370  )))
1371 1371  
1372 1372  
1373 -
1374 1374  (((
1375 1375  == **Data storage area（HDW/HDX）** ==
1376 1376  )))
... ... @@ -1501,7 +1501,6 @@
1501 1501  ** addr_getstring("@W_HSW225",15)
1502 1502  
1503 1503  (((
1504 -(% class="wikigeneratedid" %)
1505 1505  == **Power-down storage area (HAW/HAX)** ==
1506 1506  
1507 1507  The system storage area (HAW) is used for the system power-down hold registers:
... ... @@ -1575,7 +1575,7 @@
1575 1575  == **jwt_encode(table head, table payload, string aud, number iat, number exp, string key, int jwttype)** ==
1576 1576  )))
1577 1577  
1578 -**Function:** Convert data to JWT format
1576 +**Function:** Convert data to JWT format
1579 1579  
1580 1580  **parameter:**
1581 1581  
... ... @@ -1621,19 +1621,20 @@
1621 1621  
1622 1622  //key~:// the private key required for encryption
1623 1623  
1624 -For example:
1622 +**For example:**
1625 1625  
1624 +{{code language="LUA"}}
1626 1626  function jwt.main()
1627 1627  
1628 -local PRIVATE_KEY = ~[~[~-~- Please enter the secret key~-~-]]
1627 +local PRIVATE_KEY = [[-- Please enter the secret key--]]
1629 1629  
1630 1630  local JWTType=0
1631 1631  
1632 -local payload = ~{~{key="test1",value="test1",type="0"},
1631 +local payload = {{key="test1",value="test1",type="0"},
1633 1633  
1634 1634  {key="test",value="123122131",type="1"}}
1635 1635  
1636 -local head = ~{~{ key="name",value="data",type="0"},
1635 +local head = {{ key="name",value="data",type="0"},
1637 1637  
1638 1638  {key="test2",value="test2",type="0"}}
1639 1639  
... ... @@ -1648,15 +1648,14 @@
1648 1648  print(en)
1649 1649  
1650 1650  End
1650 +{{/code}}
1651 1651  
1652 1652  (((
1653 -== **9.5 convertohex(number type, number value)** ==
1653 +== **convertohex(number type, number value)** ==
1654 1654  )))
1655 1655  
1656 -**Function:**
1656 +**Function:** Convert data into hexadecimal data
1657 1657  
1658 -Convert data into hexadecimal data
1659 -
1660 1660  **parameter:**
1661 1661  
1662 1662  //type~:// incoming data type 0:word 1:dword 2:float
... ... @@ -1669,106 +1669,80 @@
1669 1669  
1670 1670  Failed: multi
1671 1671  
1672 -(((
1673 -== **9.6 set_network(table config)** ==
1674 -)))
1670 +== **crc.init(table prarm)** ==
1675 1675  
1676 -**Function:**
1672 +**Function:** Initialize the CRC
1677 1677  
1678 -Set V-BOX network, take effect after restart
1674 +**Parameters:**
1679 1679  
1680 -**parameter:**
1676 +prarm is a Lua table and needs to contain the following fields.
1681 1681  
1682 -//config~:// incoming network configuration table
1678 +* string prarm name, see table 9-1 for details of the parameter model name When this parameter is passed in, the default table parameters are used and the poly,init,xorout,refin,and refout passed in are invalid.
1679 +* number prarm.width: the width, i.e. the number of CRC bits.
1680 +* number [prarm.poly]: short for the generated item in hexadecimal. For example, CRC-32 is 0x04C11DB7, ignoring the highest bit "1", i.e., the complete generation item is 0x104C11DB7.
1681 +* number [prarm.init]: the initialization preset value of the register (crc) at the beginning of the algorithm in hexadecimal.
1682 +* number [prarm.xorout]: the final CRC value obtained after heterodyning the calculation result with this parameter.
1683 +* number [prarm.refin]: whether each byte of the data to be measured is inverted by bit, true or false.
1684 +* number [prarm.refout]: after the calculation or before the heterodyning output, whether the whole data is inverted by bit, true or false.
1683 1683  
1684 -1. connectMode: the way V-BOX connects to the server, 0: Ethernet, 1: WIFI, 2: 4G, 3: 2G, it is not allowed to be empty.
1685 -1. ethernetEnable: Whether to enable Ethernet, 1: enable, 0: disable, and it is not allowed to be empty.
1686 -1. ethernetLanIp: Set the LAN IP address. Only V-BOX with three network ports support this configuration, and other models of V-BOX do not support setting LAN IP. This item is allowed to be empty.
1687 -1. ethernetIpMode: Whether to enable Ethernet static IP, 1: Enable static IP, 0: DHCP, not allowed to be empty.
1688 -1. ethernetIp: The IP address needs to be configured when the Ethernet static IP is used, and it is not allowed to be empty.
1689 -1. ethernetNetmask: The subnet mask needs to be configured when Ethernet static IP is used, and it is not allowed to be empty.
1690 -1. ethernetGateway: The gateway can be configured when Ethernet static IP is used.
1686 +Return:
1691 1691  
1692 -1. When using the Ethernet network, if the Gateway is empty, V-BOX will not connect to the server.
1693 -1. If you only use Ethernet to directly connect to the PLC for communication, you do not need to configure a gateway.
1688 +Success: crc object
1694 1694  
1695 -1. ethernetFirstDns: You can configure the preferred DNS server when the Ethernet static IP is used, and it is allowed to be empty. If you use the Ethernet network and do not fill in the DNS server, V-BOX will not be connected to the server.
1696 -1. ethernetSpareDns: Alternate DNS server can be configured when the Ethernet static IP is used, and it is allowed to be empty.
1697 -1. wifiEnable: Whether to enable WIFI, 1: enable, 0: disable, it is not allowed to be empty. If it is a model that does not include WIFI, directly disable it.
1698 -1. wifiName: WIFI name, if WIFI is enabled, it is not allowed to be empty.
1699 -1. wifiPassword: WIFI password, it is allowed to be empty.
1700 -1. wifiIpMode: Whether to enable WIFI static IP, 1: Enable static IP, 0: DHCP, not allowed to be empty.
1701 -1. wifiIp: IP address needs to be configured when WIFI static IP is used, it is not allowed to be empty.
1702 -1. wifiNetmask: The subnet mask needs to be configured when WIFI static IP is used, and it is not allowed to be empty.
1703 -1. wifiGateway: The gateway can be configured when WIFI static IP is used, and it is not allowed to be empty.
1704 -1. wifiFirstDns: You can configure the preferred DNS server when the WIFI static IP is used, and it is allowed to be empty. If you use the WIFI network and do not fill in the DNS server, V-BOX will not be connected to the server.
1705 -1. wifiSpareDns: Alternate DNS server can be configured when the WIFI static IP is used, and it is allowed to be empty.
1706 -1. mobileEnable: Whether to enable the mobile network, 1: enable, 0: disable, it is not allowed to be empty, if it does not include 4G models, directly disable it.
1707 -1. mobileApnMode: Whether to manually configure the APN, 0: Use the default APN, 1: Manually configure the APN, it is not allowed to be empty.
1708 -1. apnName: APN name, if you choose to manually configure APN, it is not allowed to be empty.
1709 -1. apnPassword: APN username, it is allowed to be empty.
1710 -1. apnUserName: APN number, it is allowed to be empty.
1711 -1. apnNumber: APN number, it is allowed to be empty.
1690 +Failure: multi, error code
1712 1712  
1713 -**Return:**
1714 -
1715 -Succeed: true
1716 -
1717 -Faied: multi
1718 -
1719 1719  (((
1720 -== **9.7 remote_com_start(string config)** ==
1721 -)))
1693 +|=Parameter model name|=poly|=init|=xorout|=refin|=refout
1694 +|crc8|0x07|0x00|0x00|false|false
1695 +|crc8_cdma2000|0x9B|0xFF|0x00|false|false
1696 +|crc8_darc|0x39|0x00|0x00|true|true
1697 +|crc8_dvb_s2|0xD5|0x00|0x00|false|false
1698 +|crc8_ebu|0x1D|0xFF|0x00|true|true
1699 +|crc8_i_code|0x1D|0xFD|0x00|false|false
1700 +|crc8_itu|0x07|0x00|0x55|false|false
1701 +|crc8_maxim|0x31|0x00|0x00|true|true
1702 +|crc8_rohc|0x07|0xFF|0x00|true|true
1703 +|crc8_wcdma|0x9B|0x00|0x00|true|true
1704 +|crc8_sae_j1850|0x1D|0xFF|0xFF|false|false
1705 +|crc8_opensafety|0x2F|0x00|0x00|false|false
1706 +|crc16_tms37157|0x1021|0x3791|0x0000|true|true
1707 +|crc16_a|0x1021|0x6363|0x0000|true|true
1708 +|crc16_riello|0x1021|0x554D|0x0000|true|true
1709 +|crc16_ccitt_false|0x1021|0xFFFF|0x0000|false|false
1710 +|crc16_arc|0x8005|0x0000|0x0000|true|true
1711 +|crc16_arc_ccitt|0x1021|0x1D0F|0x0000|false|false
1712 +|crc16_buypass|0x8005|0x0000|0x0000|false|false
1713 +|crc16_cdma2000|0xC867|0xFFFF|0x0000|false|false
1714 +|crc16_dds110|0x8005|0x800D|0x0000|false|false
1715 +|crc16_dect_r|0x0589|0x0000|0x0001|false|false
1716 +|crc16_dect_x|0x0589|0x0000|0x0000|false|false
1717 +|crc16_dnp|0x3D65|0x0000|0xFFFF|true|true
1718 +|crc16_en_13757|0x3D65|0x0000|0xFFFF|false|false
1719 +|crc16_genibus|0x1021|0xFFFF|0xFFFF|false|false
1720 +|crc16_maxim|0x8005|0x0000|0xFFFF|true|true
1721 +|crc16_mcrf4xx|0x1021|0xFFFF|0x0000|true|true
1722 +|crc16_t10_dif|0x8BB7|0x0000|0x0000|false|false
1723 +|crc16_teledisk|0xA097|0x0000|0x0000|false|false
1724 +|crc16_usb|0x8005|0xFFFF|0xFFFF|true|true
1725 +|crc16_kermit|0x1021|0x0000|0x0000|true|true
1722 1722  
1723 -**Function:**
1727 +(% class="wikigeneratedid" %)
1728 +Table 9-1
1724 1724  
1725 -start serial port pass-through
1730 +(% class="wikigeneratedid" %)
1731 +== **crc:calc(string crcValue)** ==
1726 1726  
1727 -**Parameter:**
1733 +**Function:** Calculate CRC result
1728 1728  
1729 -//config: //incoming serial port parameter configuration, JSON format
1735 +**parameter:**
1730 1730  
1731 -1. type:0, serial port pass-through
1732 -1. port: serial port number marked on the V-BOX
1733 -1. comtype:0-RS232, 1-RS485, 2-RS422
1734 -1. baudrate: Baud Rate
1735 -1. data_length: Data Bits
1736 -1. stop_bit: Stop Bit
1737 -1. check_bit: Check Bit
1737 +crcValue: the value to be calculated
1738 1738  
1739 1739  **Return:**
1740 1740  
1741 -Succeed: true
1741 +Succeed: calcul
1742 1742  
1743 1743  Failed: multi
1744 -
1745 -(((
1746 -== **9.8 remote_com_stop()** ==
1747 1747  )))
1748 1748  
1749 -**Function:**
1750 -
1751 -close serial port pass-through
1752 -
1753 -**Return:**
1754 -
1755 -Succeed: true
1756 -
1757 -Failed: multi
1758 -
1759 -(((
1760 -== **9.9 remote_com_state()** ==
1761 -)))
1762 -
1763 -**Function:**
1764 -
1765 -query the serial port pass-through status and pass-through server domain name and port
1766 -
1767 -**Return:**
1768 -
1769 -Succeed:
1770 -
1771 -1. number, current pass-through status: 0-none 1,2-starting pass-through 3-penetrating 4,5-finishing pass-through 6-pass-through error
1772 -1. string, pass-through server domain name and port number, xxxx (domain name): xxx (port number)
1773 -
1774 -Failed: multi
1746 +