Changes for page 01 Lua Functions

Last modified by Theodore Xu on 2023/10/26 10:51

From 5.17 to 5.18 From 5.29 to 5.30

From version 5.18

edited by Stone Wu
on 2022/07/12 10:00

Change comment: (Autosaved)

To version 5.29

edited by Stone Wu
on 2022/07/12 10:40

Change comment: (Autosaved)

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1677,109 +1677,123 @@
  * string prarm name, see table 9-1 for details of the parameter model name When this parameter is passed in, the default table parameters are used and the poly,init,xorout,refin,and refout passed in are invalid.
  * number prarm.width: the width, i.e. the number of CRC bits.
--* number [prarm.poly]: short for the generated item, in hexadecimal notation. For example, CRC-32 is 0x04C11DB7, ignoring the highest bit "1", i.e., the complete generation item is 0x104C11DB7.
--* number [prarm.init], the initialization preset value of the register (crc) at the beginning of the algorithm.
++* number [prarm.poly]: short for the generated item in hexadecimal. For example, CRC-32 is 0x04C11DB7, ignoring the highest bit "1", i.e., the complete generation item is 0x104C11DB7.
++* number [prarm.init]: the initialization preset value of the register (crc) at the beginning of the algorithm in hexadecimal.
++* number [prarm.xorout]: the final CRC value obtained after heterodyning the calculation result with this parameter.
++* number [prarm.refin]: whether each byte of the data to be measured is inverted by bit, true or false.
++* number [prarm.refout]: after the calculation or before the heterodyning output, whether the whole data is inverted by bit, true or false.
--Fuzhou Fuchang V-Control Electronic Technology Co., Ltd. Page 32 / Total 39 Software III Hexadecimal representation. number [prarm.xorout], the final CRC value obtained after heterodyning the calculation result with this parameter. number [prarm.refin], whether each byte of the data to be measured is inverted by bit, true or false. number [prarm.refout], after the calculation and before the heterodyning output, whether the whole data is inverted by bit, true or false. Return: success: crc object Failure: multi, error code
++Return:
--(((
--== **set_network(table config)** ==
--)))
++Success: crc object
--**Function:** Set V-BOX network, take effect after restart
++Failure: multi, error code
--**parameter:**
++(((
++|=Parameter model name|=poly|=init|=xorout|=refin|=refout
++|crc8|0x07|0x00|0x00|false|false
++|crc8_cdma2000|0x9B|0xFF|0x00|false|false
++|crc8_darc|0x39|0x00|0x00|true|true
++|crc8_dvb_s2|0xD5|0x00|0x00|false|false
++|crc8_ebu|0x1D|0xFF|0x00|true|true
++|crc8_i_code|0x1D|0xFD|0x00|false|false
++|crc8_itu|0x07|0x00|0x55|false|false
++|crc8_maxim|0x31|0x00|0x00|true|true
++|crc8_rohc|0x07|0xFF|0x00|true|true
++|crc8_wcdma|0x9B|0x00|0x00|true|true
++|crc8_sae_j1850|0x1D|0xFF|0xFF|false|false
++|crc8_opensafety|0x2F|0x00|0x00|false|false
++|crc16_tms37157|0x1021|0x3791|0x0000|true|true
++|crc16_a|0x1021|0x6363|0x0000|true|true
++|crc16_riello|0x1021|0x554D|0x0000|true|true
++|crc16_ccitt_false|0x1021|0xFFFF|0x0000|false|false
++|crc16_arc|0x8005|0x0000|0x0000|true|true
++|crc16_arc_ccitt|0x1021|0x1D0F|0x0000|false|false
++|crc16_buypass|0x8005|0x0000|0x0000|false|false
++|crc16_cdma2000|0xC867|0xFFFF|0x0000|false|false
++|crc16_dds110|0x8005|0x800D|0x0000|false|false
++|crc16_dect_r|0x0589|0x0000|0x0001|false|false
++|crc16_dect_x|0x0589|0x0000|0x0000|false|false
++|crc16_dnp|0x3D65|0x0000|0xFFFF|true|true
++|crc16_en_13757|0x3D65|0x0000|0xFFFF|false|false
++|crc16_genibus|0x1021|0xFFFF|0xFFFF|false|false
++|crc16_maxim|0x8005|0x0000|0xFFFF|true|true
++|crc16_mcrf4xx|0x1021|0xFFFF|0x0000|true|true
++|crc16_t10_dif|0x8BB7|0x0000|0x0000|false|false
++|crc16_teledisk|0xA097|0x0000|0x0000|false|false
++|crc16_usb|0x8005|0xFFFF|0xFFFF|true|true
++|crc16_kermit|0x1021|0x0000|0x0000|true|true
--//config~:// incoming network configuration table
++(% class="wikigeneratedid" %)
++Table 9-1
--1. connectMode: the way V-BOX connects to the server, 0: Ethernet, 1: WIFI, 2: 4G, 3: 2G, it is not allowed to be empty.
--1. ethernetEnable: Whether to enable Ethernet, 1: enable, 0: disable, and it is not allowed to be empty.
--1. ethernetLanIp: Set the LAN IP address. Only V-BOX with three network ports support this configuration, and other models of V-BOX do not support setting LAN IP. This item is allowed to be empty.
--1. ethernetIpMode: Whether to enable Ethernet static IP, 1: Enable static IP, 0: DHCP, not allowed to be empty.
--1. ethernetIp: The IP address needs to be configured when the Ethernet static IP is used, and it is not allowed to be empty.
--1. ethernetNetmask: The subnet mask needs to be configured when Ethernet static IP is used, and it is not allowed to be empty.
--1. ethernetGateway: The gateway can be configured when Ethernet static IP is used.
++== **crc:calc(string crcValue)** ==
--1. When using the Ethernet network, if the Gateway is empty, V-BOX will not connect to the server.
--1. If you only use Ethernet to directly connect to the PLC for communication, you do not need to configure a gateway.
++**Function:** Calculate CRC result
--1. ethernetFirstDns: You can configure the preferred DNS server when the Ethernet static IP is used, and it is allowed to be empty. If you use the Ethernet network and do not fill in the DNS server, V-BOX will not be connected to the server.
--1. ethernetSpareDns: Alternate DNS server can be configured when the Ethernet static IP is used, and it is allowed to be empty.
--1. wifiEnable: Whether to enable WIFI, 1: enable, 0: disable, it is not allowed to be empty. If it is a model that does not include WIFI, directly disable it.
--1. wifiName: WIFI name, if WIFI is enabled, it is not allowed to be empty.
--1. wifiPassword: WIFI password, it is allowed to be empty.
--1. wifiIpMode: Whether to enable WIFI static IP, 1: Enable static IP, 0: DHCP, not allowed to be empty.
--1. wifiIp: IP address needs to be configured when WIFI static IP is used, it is not allowed to be empty.
--1. wifiNetmask: The subnet mask needs to be configured when WIFI static IP is used, and it is not allowed to be empty.
--1. wifiGateway: The gateway can be configured when WIFI static IP is used, and it is not allowed to be empty.
--1. wifiFirstDns: You can configure the preferred DNS server when the WIFI static IP is used, and it is allowed to be empty. If you use the WIFI network and do not fill in the DNS server, V-BOX will not be connected to the server.
--1. wifiSpareDns: Alternate DNS server can be configured when the WIFI static IP is used, and it is allowed to be empty.
--1. mobileEnable: Whether to enable the mobile network, 1: enable, 0: disable, it is not allowed to be empty, if it does not include 4G models, directly disable it.
--1. mobileApnMode: Whether to manually configure the APN, 0: Use the default APN, 1: Manually configure the APN, it is not allowed to be empty.
--1. apnName: APN name, if you choose to manually configure APN, it is not allowed to be empty.
--1. apnPassword: APN username, it is allowed to be empty.
--1. apnUserName: APN number, it is allowed to be empty.
--1. apnNumber: APN number, it is allowed to be empty.
++**Parameter:**
++crcValue: the value to be calculated
++
  **Return:**
--Succeed: true
++Succeed: calculated result
--Faied: multi
--
--(((
--== **9.7 remote_com_start(string config)** ==
++Failed: multi, error code
  )))
--**Function:**
++Example:
--start serial port pass-through
++{{code language="LUA"}}
++function crcTest.main()
--**Parameter:**
++local param = {
--//config: //incoming serial port parameter configuration, JSON format
++name = '',
--1. type:0, serial port pass-through
--1. port: serial port number marked on the V-BOX
--1. comtype:0-RS232, 1-RS485, 2-RS422
--1. baudrate: Baud Rate
--1. data_length: Data Bits
--1. stop_bit: Stop Bit
--1. check_bit: Check Bit
++width = 64,
--**Return:**
++poly = 0x42F0E1EBA9EA3693,
--Succeed: true
++init = 0xFFFFFFFFFFFFFFFF,
--Failed: multi
++xorout = 0xFFFFFFFFFFFFFFFF,
--(((
--== **9.8 remote_com_stop()** ==
--)))
++refin = 1,
--**Function:**
++refout = 1
--close serial port pass-through
++}
--**Return:**
++crc64,err = crc.init(param)
--Succeed: true
++if not crc64 then
--Failed: multi
++print("Crc init failed:", err)
++else
--(((
--== **9.9 remote_com_state()** ==
--)))
++crcvalue = crc64:calc("123456789")
--**Function:**
++print(string.format("crc64 calc :0X%16X", crcvalue))
--query the serial port pass-through status and pass-through server domain name and port
++end
++end
++{{/code}}
++
++= **11 Special function for V-NET** =
++
++**normal_get_alldata()**
++
++**Function: **Obtain the data of all the monitoring points
++
++**Parameter: None**
++
  **Return:**
--Succeed:
++Succeed: table two-dimensional arrays, as follows:
--1. number, current pass-through status: 0-none 1,2-starting pass-through 3-penetrating 4,5-finishing pass-through 6-pass-through error
--1. string, pass-through server domain name and port number, xxxx (domain name): xxx (port number)
++* Each item is a monitoring point and contains 4 attributes: ID, status, tag name, value)
++* Status contains 3 enumerated values (0: offline, 1: online, 2: timeout) Customization returns an empty table if there is no configuration, and vice versa, with "field name/field content"
--Failed: multi
++Failed: multi, error code

Changes for page 01 Lua Functions

Summary

Details

Navigation

Table of Contents