Skip to Content

Wiki source code of 3.1 Network and Binding

Last modified by Devin Chen on 2026/04/10 10:46
Show last authors
1 = **V-BOX connect PC** =
2
3 There are two methods to detect box in PC, USB and Net.
4
5 == **USB** ==
6
7 After installing and running the PC client, click on the [[image:配置图标.png]] or [Device Confi→VBOX] to enter the configuration interface.
8 Use Ethernet cable or Android USB cable to connect: [PLC to box connection mode] → [USB] / [LAN] → select [USB] After the device is recognised, the right side [Operation reminder] will show the information of the corresponding device.
9
10 (% style="text-align:center" %)
11 [[image:USB识别.png]]
12
13 == **Net** ==
14
15 Keep v-box and pc in the same LAN, and enable NET to detect.
16
17 (% style="text-align:center" %)
18 [[image:iGs1fYiGIl.png]]
19
20 (% style="text-align:center" %)
21 [[image:qhrSYFydmI.png]]
22
23
24 (% class="box infomessage" %)
25 (((
26 Note: It will not work in connecting V-BOX to PC via Ethernet cable directly.
27 )))
28
29 == **Connect to the cloud** ==
30
31 When V-BOX is not configured to connect to the cloud, V-BOX will first automatically retrieve whether there is a connection mode activated. If the network access is retrieved, it will automatically use the method to connect to the cloud. The priority of the connection to the cloud: **Ethernet> WiFi>4G.** The specific instructions are as follows:
32
33 1. If there is only one way to connect to the Internet, the system would automatically select it to connect to the cloud. For example, if there is a network cable plugged in the Ethernet port, the connection to the cloud of the system defaults to Ethernet. If WiFi signal access is retrieved, the connection to the cloud of the system defaults to WIFI. If an existing 4G card is inserted, the connection to the cloud of the system defaults to 4G.
34 1. If the Ethernet port and WiFi are connected at the same time, the connection to the cloud of the system defaults to Ethernet.
35 1. If the Ethernet port and 4G are connected at the same time, the connection to the cloud of the system defaults to Ethernet.
36 1. If WiFi and 4G are connected at the same time, the connection to the cloud of the system defaults to WIFI. If the WiFi signal could not be retrieved, it will automatically switch to the 4G connection mode.
37 1. If all the three connection modes are retrieved, the connection to the cloud of the system defaults to Ethernet. If the Ethernet could not be connected to the Internet, it will automatically retrieve the WiFi signal. If the WiFi model cannot be connected normally, it will automatically retrieve the 4G signal.
38
39 The table below shows port number for accessing the server or other function. Please permit ports in outbound of the network.
40
41 (((
42 (% style="width:30px" %)
43 |=(% scope="row" style="width: 90px;" %)Port|(% style="width:53px" %)80|(% style="width:55px" %)380|(% style="width:123px" %)443|(% style="width:104px" %)18080|(% style="width:90px" %)18081|(% style="width:112px" %)28080|(% style="width:90px" %)20102|(% style="width:83px" %)48080|(% style="width:83px" %)1883|(% style="width:83px" %)2883|(% style="width:83px" %)8883|(% style="width:83px" %)9883|(% style="width:83px" %)123|(% style="width:83px" %)17380|(% style="width:83px" %)17680|(% style="width:83px" %)20000~~30000
44
45 (% style="width:30px" %)
46 |=(% scope="row" style="width: 90px;" %)Port|(% style="width:53px" %)1142|(% style="width:55px" %)1156|(% style="width:123px" %)4441|(% style="width:104px" %)4404|(% style="width:90px" %)4443|(% style="width:112px" %)7000|(% style="width:112px" %)2991|(% style="width:112px" %)8899|(% style="width:112px" %)9798|(% style="width:112px" %)9899|(% style="width:112px" %)17195|(% style="width:112px" %)17196|(% style="width:112px" %)17197|(% style="width:112px" %)17198
47
48 ​​​​​​​
49
50 (% class="box infomessage" %)
51 (((
52 Note: There are some ports as examples
53
54 1.Port 80,8899: V-box can't connect to the server (the LNIK lamp is blinking).
55
56 2.Port 17195,17196,8899: Fali to connect the server when using VPN through.
57
58 3.These port also applicable to the 2.0 platform
59 )))
60 )))
61
62 (% class="wikigeneratedid" id="HConfigurenetwork" %)
63 **Configure network**
64
65 (% class="wikigeneratedid" %)
66 **(1) Ethernet mode. **There are two modes of dynamic IP address and static IP address. When using static IP address mode, complete IP information must be configured, and it must not conflict with other IP.
67
68 * Click [Configure network] → [Networking configuration] for configuring device network → [The server] China, please select the corresponding server according to the actual situation.
69 * [Enable Ethernet] → [**DHCP**] need to connect to the router, you can also enable WIFI (need to configure the WIFI name and WIFI password) or 4G.
70 * box access password] Default 888888.
71 * [Device connection to cloud] Ethernet, you can also choose WIFI or 4G. click [Download] to download the configuration to VBOX after the configuration is done.
72
73 (% style="text-align:center" %)
74 [[image:网络配置2.png]]
75
76 **(2)Ethernet**→**[Use static IP address]**
77
78 Customise the network IP according to the network segment where the router is located
79
80 (% style="text-align:center" %)
81 [[image:静态IP1.png]]
82
83 **4G**
84
85 (% class="box infomessage" %)
86 (((
87 **✎Note:** 4G mode is only available in V-BOX that supports 4G function. Each country's 4G frequency band and system are different. When purchasing a V-BOX containing 4G function, please maintain sufficient communication with the salesman. For example, V-BOX H-AG(Global 4G module).
88 )))
89
90 (% style="text-align:center" %)
91 [[image:4G.png]]
92
93 **WIFI**
94
95 (% style="text-align:center" %)
96 [[image:WIFI.png]]
97
98 **Test network**
99
100 After configuring the network and rebooting the VBOX, you can test network to detect the current IP of the VBOX and whether it can connect to the server normally.
101
102 (% style="text-align:center" %)
103 [[image:测试网络.png]]
104
105 **Get machine code**
106 After successful connection, click [Get Machine Code].
107
108 (% style="text-align:center" %)
109 [[image:复制机器码.png]]
110
111 = **Add a V-BOX** =
112
113 Open the V-BOX V-NET client software and click[[image:绑定设备.png]] → [Device management]→[+] → [Add Device]: [Device Machine Code/Product Code], [Password] default 888888, [Remark] custom name, → [OK] for device binding.
114
115 If the VBOX is added successfully and it is online (normal network), the colour of the status indicator is green, if it is grey, please check whether the network configuration is normal.
116
117 (% style="text-align:center" %)
118 [[image:1sHeTCWUJK.png]]
119
120 **(1) Access key(machine code). **Each v-box or ig HMI has a unique machine code.
121
122 **(2)** If multiple v-boxes or ig screens are bound at the same time, export the template to fill in the machine codes, and then import the form to bind.
123
124 * Template. An export template file is an excel form named "batch_mould" with the format to input machine codes.
125 * Import. Fill in the machine codes to the template file, and import it.
126
127 (% style="text-align:center" %)
128 [[image:8Ztjtebmka.png||height="654" width="664"]]
129
130 (% class="box infomessage" %)
131 (((
132 **✎Note:** The content of the template file must only be header and machine codes, and all the other contents need to be deleted.
133 )))
134
135 **Password. **The default password is 888888. The length of the device password is 6 digits, Special characters are allowed, and cannot be empty.
136
137 **Device alias. **It is the device name in the device menu bar. The name display up to 12 digits. Special characters are restricted to input except ,·_-+=}]"，。？、；：“”‘’【】—（）…！《》, and cannot be empty.
138
139 (% style="text-align:center" %)
140 [[image:批量绑定的限制.png]]
141
142 (% class="box infomessage" %)
143 (((
144 **✎Note:**
145
146 1. If the user** **binds multiple devices at the same time, the passwords of the devices must be consistent. Only one machine code can be entered on a line. When entering multiple machine codes, use the "Enter" key to change the line. If not, the format is wrong, and the binding will fail and an error will be reported.
147 1. If the user** **binds multiple machine codes in batches, the device alias will use the input device name as the prefix, and the system will automatically add a suffix. Example: Default group (device alias)_1 (automatically added suffix)
148 )))