Wiki source code of 3 V-NET Client
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | = 1 Login page = | ||
| 2 | |||
| 3 | (% style="text-align:center" %) | ||
| 4 | [[image:V-NET Login.png]] | ||
| 5 | |||
| 6 | == Language switch == | ||
| 7 | |||
| 8 | Switch the display language of the software through the first drop-down list. Currently, there are two languages: Simplified Chinese, English. | ||
| 9 | |||
| 10 | == Server selection == | ||
| 11 | |||
| 12 | Users can switch servers connected to on the software through the second drop-down list. | ||
| 13 | |||
| 14 | == User login == | ||
| 15 | |||
| 16 | * Enter the correct account password to log in successfully | ||
| 17 | * If the same account is in differentPCLogin on the different device at the same time, the account logged on the first device will be forced to log off | ||
| 18 | * The view account does not have permission to use the device pass-through function on the home page | ||
| 19 | |||
| 20 | == Remember password == | ||
| 21 | |||
| 22 | * If check this option, after entering the correct password and log in successfully, V-NET Client software would remember the password | ||
| 23 | * Users can select remembered account and password to log in directly through the inputbox drop-down list without repeatedly entering the password | ||
| 24 | |||
| 25 | == Offline mode == | ||
| 26 | |||
| 27 | Users can jump directly to the homepage without entering the account password by clicking Offline-mode. Only some functions are worked in offline mode. Please refer to the corresponding function modules in the following specific contents. | ||
| 28 | |||
| 29 | = 2 Offline mode = | ||
| 30 | |||
| 31 | (% style="text-align:center" %) | ||
| 32 | [[image:V-NET Offline.png]] | ||
| 33 | |||
| 34 | In offline mode, only some functions are available without login, like the above screenshot shows: The Display and Device Pass-through are disabled. To use the non-offline mode function, please close the V-NET Client, and restart to login account. | ||
| 35 | |||
| 36 | = 3 Display = | ||
| 37 | |||
| 38 | (% style="text-align:center" %) | ||
| 39 | [[image:V-NET homepage.png]] | ||
| 40 | |||
| 41 | After logging into the software, jump to the V-NET homepage by default | ||
| 42 | |||
| 43 | (% style="text-align:center" %) | ||
| 44 | [[image:New layout.png]] | ||
| 45 | |||
| 46 | The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through" | ||
| 47 | |||
| 48 | = 4 Device Configuration = | ||
| 49 | |||
| 50 | (% style="text-align:center" %) | ||
| 51 | [[image:DeviceConfiguration.png]] | ||
| 52 | |||
| 53 | == Connect method == | ||
| 54 | |||
| 55 | * USB direct connection | ||
| 56 | * Ethernet cable in LAN | ||
| 57 | |||
| 58 | (% style="text-align:center" %) | ||
| 59 | [[image:Scan Segment.png]] | ||
| 60 | |||
| 61 | * When the inputbox is not entered and directly click the magnifer icon, the current segment is scanned accroding to the PC IP's segment. | ||
| 62 | * When the inputbox is entered and click magnifer icon, the current segment is scanned according to the input IP. | ||
| 63 | |||
| 64 | == Configure network == | ||
| 65 | |||
| 66 | (% style="text-align:center" %) | ||
| 67 | [[image:Network Config.png]] | ||
| 68 | |||
| 69 |