Skip to Content

Changes for page 03 V-NET Client

Last modified by Joe on 2024/12/27 17:41
From version 2.1
edited by Hunter
on 2023/01/07 09:50
Change comment: There is no comment for this version
To version 2.7
edited by Hunter
on 2023/01/07 10:35
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -38,12 +38,12 @@
38 38  (% style="text-align:center" %)
39 39  [[image:V-NET homepage.png]]
40 40  
41 -After logging into the software, jump to the V-NET homepage by default
41 +After logging into the software, jump to the V-NET homepage by default.
42 42  
43 43  (% style="text-align:center" %)
44 44  [[image:New layout.png]]
45 45  
46 -The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through"
46 +The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through".
47 47  
48 48  = 4 Device Configuration =
49 49  
... ... @@ -50,4 +50,63 @@
50 50  (% style="text-align:center" %)
51 51  [[image:DeviceConfiguration.png]]
52 52  
53 +== Connect method ==
54 +
55 +* USB direct connection
56 +* Ethernet cable in LAN
57 +
58 +(% style="text-align:center" %)
59 +[[image:Scan Segment.png]]
60 +
61 +* When the inputbox is not entered and directly click the magnifer icon, the current segment is scanned accroding to the PC IP's segment.
62 +* When the inputbox is entered and click magnifer icon, the current segment is scanned according to the input IP.
63 +
64 +== Configure network ==
65 +
66 +(% style="text-align:center" %)
67 +[[image:Network Config.png]]
68 +
69 +* After V-Box is selected, configure the network for the current device
70 +* Upload is for uploads the network configuration of the current devic
71 +* (((
72 +After downloaded, the current device will connect to the corresponding server according to downloaded configuration
73 +)))
74 +
75 +== Test network ==
76 +
77 +Get the network status of the current device, see whether V-Box can ping server successfully.
78 +
79 +== Update Firmware ==
80 +
81 +Compare the firmware version carried by the software with the firmware version running by the device, if the firmware version of the V-NET Client software is higher than the firmware version of the device(V-Box), choose whether to upgrade the firmware of the device.
82 +
83 +== Flash light ==
84 +
85 +Let the lights of the V-Box start flashing quickly for several seconds, which is convenient for positioning where is the V-Box.
86 +
87 +== Get machine code ==
88 +
89 +Get the machine code of the current connected device and copy it to the clipboard.
90 +
91 +== Update time ==
92 +
93 +According to the current PC UTC time, to calibrate time of V-Box, but this would not change the time zone of V-Box.
94 +
95 +== Clear ==
96 +
97 +Clear the operation log in the Operation reminder
98 +
99 += 5 Device Pass-through =
100 +
101 +== PLC Pass-through ==
102 +
103 +(% style="text-align:center" %)
104 +[[image:PLC Passthrough.png]]
105 +
106 +**Functional overview**
107 +
108 +{{info}}
109 +Built on V-BOX/ig HMI and PLC on the basis of normal communication, online PLC connection according to the generated virtual serial port, allowing the PLC software communicate PLC, complete the upload/download PLC programs, monitoring PLC programs and other functions
110 +{{/info}}
111 +
53 53  
Network Config.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
PLC Passthrough.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +42.5 KB
Content
Scan Segment.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +40.1 KB
Content