Skip to Content

Changes for page 03 V-NET Client

Last modified by Joe on 2024/12/27 17:41
From version 2.11
edited by Hunter
on 2023/01/07 11:26
Change comment: There is no comment for this version
To version 5.1
edited by Hunter
on 2023/01/07 11:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -43,7 +43,7 @@
43 43  (% style="text-align:center" %)
44 44  [[image:New layout.png]]
45 45  
46 -The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through".
46 +The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter [[Device Pass-through>>https://"Device Pass-through"]].
47 47  
48 48  = 4 Device Configuration =
49 49  
... ... @@ -185,4 +185,119 @@
185 185  === **4 Start pass-through/End pass-through** ===
186 186  
187 187  * Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
188 -*
188 +* Click End pass-through to end VPN pass-through
189 +* When the device is offline, the Start pass-through button cannot be clicked
190 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
191 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
192 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
193 +* (((
194 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
195 +)))
196 +
197 +== HMI Pass-through ==
198 +
199 +(% style="text-align:center" %)
200 +[[image:HMI Passthrough.png]]
201 +
202 +**Functional overview**
203 +
204 +{{info}}
205 +Select the download tool path in the installed PIStudio, pop up the download tool after successfully start pass-through , and select PC->HMI, and select the compiled .wmt or .wmt3 file, the program can be downloaded to the HMI. After the project downloaded, HMI will automatically restart.
206 +{{/info}}
207 +
208 +=== **1 Device list** ===
209 +
210 +* Display all support HMI devices under current account
211 +* Right-click menu, search box is consistent with PLC pass-through
212 +
213 +=== **2 HMI Download tool configuration** ===
214 +
215 +The folder where the selected download tool is located and the corresponding PIStudio version information
216 +
217 +=== **3 Browse** ===
218 +
219 +Click Browse to find out if the selected folder containsPIStudioand download tools(Need to ensure existence)
220 +
221 +=== **4 ReOpen** ===
222 +
223 +When click start pass-through, and the download tool is closed due to some situation after opened it, click ReOpen to open the download tool again
224 +
225 +=== **5 HMI Download tool list** ===
226 +
227 +* Automatically search and detect the installed PIStudio on this PC, and display all installed download tools and their versions when enter the HMI pass-through page
228 +* Select any option in the table, download tool configuration area display the corresponding selected option's information, and saves the selected HMIdownload tool configuration at the same time
229 +
230 +=== **6 Device information** ===
231 +
232 +Display device status and machine code
233 +
234 +=== **7 Start pass-through/End pass-through** ===
235 +
236 +* Click Start pass-through, proceed pass-through according to the specified download tool and the selected device
237 +* Click End pass-through to end HMI pass-through
238 +* When the device is offline, the Start pass-through button cannot be clicked
239 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
240 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
241 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
242 +* After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to orange, and the selected download tool is opened at the same time
243 +* (((
244 +The download tool is opened correctly: Machine code can be obtained and detected HMI firmware version
245 +)))
246 +
247 +(% style="text-align:center" %)
248 +[[image:Success passthrough download tool.png]]
249 +
250 += 6 Tools =
251 +
252 +== ARP Scan ==
253 +
254 +(% style="text-align:center" %)
255 +[[image:ARP scan.png]]
256 +
257 +* Scan selectable network adapters
258 +* Click the Scan button to scan all devices' IP address and the corresponding MAC address in the same network segment within the setting timeout
259 +* (((
260 +The scanned device will be displayed on the list, which can help to judge whether the current device exists IP conflict problem or not
261 +)))
262 +
263 +== OPC Tool ==
264 +
265 +(% style="text-align:center" %)
266 +[[image:OPC tool.png]]
267 +
268 +* The software is built-inOPCtool, no need to download additionally, about the specific operation of OPC tool, please refer to the [[OPC tool>>doc:V-BOX.V-Net.Manual.7 OPC tool.WebHome]]
269 +* OPC tools can be found in the home menu bar->Tools->OPC tool
270 +
271 += 7 Configuration =
272 +
273 +(% style="text-align:center" %)
274 +[[image:Configuration.png]]
275 +
276 +== Server Select ==
277 +
278 +Select the specified server, switch servers, and return to the login page
279 +
280 +== Virtual Serial Port ==
281 +
282 +* Enable When using the PLC pass-through, need to use the virtual serial port function
283 +* Select serial port: Choose the current idle serial port as the virtual serial port independently, so as to avoid access another new USB device conflict
284 +
285 +== Firmware Update ==
286 +
287 +Compare the firmware version carried by the current V-NET Client software with the latest firmware on the server. If not, choose to update the firmware version carried by the software
288 +
289 +* Auto Update: Automatically detect whether the firmware version carried by the current V-NET Client software is the latest firmware on the server during the software running
290 +* Manual Update: Need to click manually to compare the firmware version carried by the current V-NET Client software with the latest firmware version on the server
291 +
292 +== Cache Clear ==
293 +
294 +Click this button to restart the software and clear cef folder cache
295 +
296 += 8 Help =
297 +
298 +(% style="text-align:center" %)
299 +[[image:AboutUs.png]]
300 +
301 +* Display software-related information
302 +* Display APP and WeChat applet QR code
303 +* Display company information
ARP scan.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
AboutUs.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +70.6 KB
Content
Configuration.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +70.0 KB
Content
HMI Passthrough.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
OPC tool.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +27.4 KB
Content
Success passthrough download tool.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content