Skip to Content

Changes for page 03 V-NET Client

Last modified by Joe on 2024/12/27 17:41
From version 2.12
edited by Hunter
on 2023/01/07 11:33
Change comment: There is no comment for this version
To version 9.1
edited by Theodore Xu
on 2023/05/26 13:52
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Hunter
1 +XWiki.AiXia
Content
... ... @@ -43,7 +43,7 @@
43 43  (% style="text-align:center" %)
44 44  [[image:New layout.png]]
45 45  
46 -The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through".
46 +The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter [[Device Pass-through>>https://docs.we-con.com.cn/bin/view/V-BOX/V-Net/Manual/3%20V-NET%20Client/#H5DevicePass-through]].
47 47  
48 48  = 4 Device Configuration =
49 49  
... ... @@ -76,10 +76,6 @@
76 76  
77 77  Get the network status of the current device, see whether V-Box can ping server successfully.
78 78  
79 -== Update Firmware ==
80 -
81 -Compare the firmware version carried by the software with the firmware version running by the device, if the firmware version of the V-NET Client software is higher than the firmware version of the device(V-Box), choose whether to upgrade the firmware of the device.
82 -
83 83  == Flash light ==
84 84  
85 85  Let the lights of the V-Box start flashing quickly for several seconds, which is convenient for positioning where is the V-Box.
... ... @@ -156,7 +156,7 @@
156 156  * When the current account has a device being pass-through, the Start pass-through button cannot be clicked
157 157  * After clicking the Start pass-through button, if the pass-through is successful, the button changes to End pass-through, and the device status color on the left side list changes to blue
158 158  
159 -== VPN Pass-through ==
155 +== WVPN Pass-through ==
160 160  
161 161  (% style="text-align:center" %)
162 162  [[image:VPN passthrough.png]]
... ... @@ -194,6 +194,12 @@
194 194  After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
195 195  )))
196 196  
193 +{{info}}
194 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
195 +{{/info}}
196 +
197 +
198 +
197 197  == HMI Pass-through ==
198 198  
199 199  (% style="text-align:center" %)
... ... @@ -213,3 +213,93 @@
213 213  === **2 HMI Download tool configuration** ===
214 214  
215 215  The folder where the selected download tool is located and the corresponding PIStudio version information
218 +
219 +=== **3 Browse** ===
220 +
221 +Click Browse to find out if the selected folder containsPIStudioand download tools(Need to ensure existence)
222 +
223 +=== **4 ReOpen** ===
224 +
225 +When click start pass-through, and the download tool is closed due to some situation after opened it, click ReOpen to open the download tool again
226 +
227 +=== **5 HMI Download tool list** ===
228 +
229 +* Automatically search and detect the installed PIStudio on this PC, and display all installed download tools and their versions when enter the HMI pass-through page
230 +* Select any option in the table, download tool configuration area display the corresponding selected option's information, and saves the selected HMIdownload tool configuration at the same time
231 +
232 +=== **6 Device information** ===
233 +
234 +Display device status and machine code
235 +
236 +=== **7 Start pass-through/End pass-through** ===
237 +
238 +* Click Start pass-through, proceed pass-through according to the specified download tool and the selected device
239 +* Click End pass-through to end HMI pass-through
240 +* When the device is offline, the Start pass-through button cannot be clicked
241 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
242 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
243 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
244 +* After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to orange, and the selected download tool is opened at the same time
245 +* (((
246 +The download tool is opened correctly: Machine code can be obtained and detected HMI firmware version
247 +)))
248 +
249 +(% style="text-align:center" %)
250 +[[image:Success passthrough download tool.png]]
251 +
252 += 6 Tools =
253 +
254 +== ARP Scan ==
255 +
256 +(% style="text-align:center" %)
257 +[[image:ARP scan.png]]
258 +
259 +* Scan selectable network adapters
260 +* Click the Scan button to scan all devices' IP address and the corresponding MAC address in the same network segment within the setting timeout
261 +* (((
262 +The scanned device will be displayed on the list, which can help to judge whether the current device exists IP conflict problem or not
263 +)))
264 +
265 +== OPC Tool ==
266 +
267 +(% style="text-align:center" %)
268 +[[image:OPC tool.png]]
269 +
270 +* The software is built-inOPCtool, no need to download additionally, about the specific operation of OPC tool, please refer to the [[OPC tool>>doc:V-BOX.V-Net.Manual.7 OPC tool.WebHome]]
271 +* OPC tools can be found in the home menu bar->Tools->OPC tool
272 +
273 += 7 Configuration =
274 +
275 +(% style="text-align:center" %)
276 +[[image:Configuration.png]]
277 +
278 +== Server Select ==
279 +
280 +Select the specified server, switch servers, and return to the login page
281 +
282 +== Virtual Serial Port ==
283 +
284 +* Enable When using the PLC pass-through, need to use the virtual serial port function
285 +* Select serial port: Choose the current idle serial port as the virtual serial port independently, so as to avoid access another new USB device conflict
286 +
287 +== Firmware Update ==
288 +
289 +Compare the firmware version carried by the software with the firmware version running by the device, if the firmware version of the V-NET Client software is higher than the firmware version of the device(V-Box), choose whether to upgrade the firmware of the device.
290 +
291 +* Auto Update: Automatically detect whether the firmware version carried by the current V-NET Client software is the latest firmware on the server during the software running
292 +* Manual Update: Need to click manually to compare the firmware version carried by the current V-NET Client software with the latest firmware version on the server
293 +
294 +== ==
295 +
296 +== Cache Clear ==
297 +
298 +Click this button to restart the software and clear cef folder cache
299 +
300 += 8 Help =
301 +
302 +(% style="text-align:center" %)
303 +[[image:AboutUs.png]]
304 +
305 +* Display software-related information
306 +* Display APP and WeChat applet QR code
307 +* Display company information
ARP scan.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
AboutUs.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +70.6 KB
Content
Configuration.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +70.0 KB
Content
OPC tool.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +27.4 KB
Content
Success passthrough download tool.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content