Skip to Content

Changes for page 03 V-NET Client

Last modified by Joe on 2024/12/27 17:41
From version 2.3
edited by Hunter
on 2023/01/07 10:08
Change comment: There is no comment for this version
To version 2.6
edited by Hunter
on 2023/01/07 10:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -38,12 +38,12 @@
38 38  (% style="text-align:center" %)
39 39  [[image:V-NET homepage.png]]
40 40  
41 -After logging into the software, jump to the V-NET homepage by default
41 +After logging into the software, jump to the V-NET homepage by default.
42 42  
43 43  (% style="text-align:center" %)
44 44  [[image:New layout.png]]
45 45  
46 -The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through"
46 +The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through".
47 47  
48 48  = 4 Device Configuration =
49 49  
... ... @@ -72,4 +72,30 @@
72 72  After downloaded, the current device will connect to the corresponding server according to downloaded configuration
73 73  )))
74 74  
75 +== Test network ==
76 +
77 +Get the network status of the current device, see whether V-Box can ping server successfully.
78 +
79 +== Update Firmware ==
80 +
81 +Compare the firmware version carried by the software with the firmware version running by the device, if the firmware version of the V-NET Client software is higher than the firmware version of the device(V-Box), choose whether to upgrade the firmware of the device.
82 +
83 +== Flash light ==
84 +
85 +Let the lights of the V-Box start flashing quickly for several seconds, which is convenient for positioning where is the V-Box.
86 +
87 +== Get machine code ==
88 +
89 +Get the machine code of the current connected device and copy it to the clipboard.
90 +
91 +== Update time ==
92 +
93 +According to the current PC UTC time, to calibrate time of V-Box, but this would not change the time zone of V-Box.
94 +
95 +== Clear ==
96 +
97 +Clear the operation log in the Operation reminder
98 +
99 +
100 +
75 75