Skip to Content

3 V-NET Client

Version 2.2 by Hunter on 2023/01/07 10:03

1 Login page

V-NET Login.png

Language switch

Switch the display language of the software through the first drop-down list. Currently, there are two languages: Simplified Chinese, English.

Server selection

Users can switch servers connected to on the software through the second drop-down list.

User login

  • Enter the correct account password to log in successfully
  • If the same account is in differentPCLogin on the different device at the same time, the account logged on the first device will be forced to log off
  • The view account does not have permission to use the device pass-through function on the home page

Remember password

  • If check this option, after entering the correct password and log in successfully, V-NET Client software would remember the password
  • Users can select remembered account and password to log in directly through the inputbox drop-down list without repeatedly entering the password

Offline mode

Users can jump directly to the homepage without entering the account password by clicking Offline-mode. Only some functions are worked in offline mode. Please refer to the corresponding function modules in the following specific contents.

2 Offline mode

V-NET Offline.png

In offline mode, only some functions are available without login, like the above screenshot shows: The Display and Device Pass-through are disabled. To use the non-offline mode function, please close the V-NET Client, and restart to login account.

3 Display

V-NET homepage.png

After logging into the software, jump to the V-NET homepage by default

New layout.png

The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through"

4 Device Configuration

DeviceConfiguration.png

Connect method

  • USB direct connection
  • Ethernet cable in LAN

Scan Segment.png

  • When the inputbox is not entered and directly click the magnifer icon, the current segment is scanned accroding to the PC IP's segment.
  • When the inputbox is entered and click magnifer icon, the current segment is scanned according to the input IP.

Configure network

Network Config.png