Skip to Content

Changes for page 05 Cloud SCADA

Last modified by Joe on 2024/08/08 09:29
From version 24.10
edited by Stone Wu
on 2022/07/15 15:25
Change comment: (Autosaved)
To version 24.8
edited by Stone Wu
on 2022/07/15 15:15
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -291,14 +291,12 @@
291 291  
292 292  Double-click the object to open property window, modify the parameters, and save.
293 293  
294 -[[image:image-20220715150846-2.jpeg]]
295 -
296 296  **Object device modifcation**
297 297  
298 -* **Common object:** you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object. If you modify the monitoring point, there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then all the monitoring point information of the box bound to the object will be cleared, and switch the binding type of the object from V-BOX to HMI.
299 -* **Time object: **Because HMI can't report the time, the monitoring equipment function of the time object can't be compatible with HMI. Therefore, when selecting the monitoring point of the monitoring device, there is only the option of V-BOX, and its multi-level grouping will only display the information of V-BOX. The display and hide function of this object can still bind HMI, but if the display and hide monitoring points are bound, the monitoring point binding to the monitoring device will be cleared.
300 -* **Alarm record object:** In the alarm record, because the operation of binding monitoring point is different from other components, no matter what the binding type before the component is, when switching between box and screen, a switching reminder will be given.
296 +Common object: you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object, and the user needs to modify the monitoring point with the binding device type as screen in the component, and there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then we will clear the monitoring point information of the box bound before the component, and switch the binding type of the component from smart box to screen.
301 301  
298 +[[image:image-20220715150846-2.jpeg]]
299 +
302 302  === 6.4.2 Introduction ===
303 303  
304 304  **1)Basic**