Skip to Content

Changes for page 05 Cloud SCADA

Last modified by Joe on 2024/08/08 09:29
From version 24.11
edited by Stone Wu
on 2022/07/15 15:34
Change comment: There is no comment for this version
To version 24.12
edited by Stone Wu
on 2022/07/15 15:35
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -298,7 +298,7 @@
298 298  * **Common object:** you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object. If you modify the monitoring point, there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then all the monitoring point information of the box bound to the object will be cleared, and switch the binding type of the object from V-BOX to HMI.
299 299  * **Time object: **Because HMI can't report the time, the monitoring equipment function of the time object can't be compatible with HMI. Therefore, when selecting the monitoring point of the monitoring device, there is only the option of V-BOX, and its multi-level grouping will only display the information of V-BOX. The display and hide function of this object can still bind HMI, but if the display and hide monitoring points are bound, the monitoring point binding to the monitoring device will be cleared.
300 300  * **Alarm record object:** Because the operation of binding monitoring point is different from other objects, no matter what the binding type before the object is, when switching between V-BOX and HMI, a switching reminder will be given. At the same time, when switching the binding device type at "display/conditional hide", the monitoring point information of the object binding will also be cleared, and the device type display will be switched.
301 -* **Report object: **When you switchinW the device type of report binding at the monitoring point binding of the report, as shown in the figure; At the same time, if you switch the binding device type at "Show/Conditional Hide", the monitoring point information of the component binding will also be cleared, and the device type display here will be switched, as shown in Figure 5-14 below.
301 +* **Report object: **When you switch the device type of report binding at the monitoring point binding of the report, as shown in the figure; At the same time, if you switch the binding device type at "Show/Conditional Hide", the monitoring point information of the component binding will also be cleared, and the device type display here will be switched, as shown in Figure 5-14 below.
302 302  
303 303  === 6.4.2 Introduction ===
304 304