Changes for page 05 Cloud SCADA

Last modified by Joe on 2024/08/08 09:29

From version 24.5

edited by Stone Wu
on 2022/07/15 15:05

Change comment: (Autosaved)

To version 24.9

edited by Stone Wu
on 2022/07/15 15:20

Change comment: (Autosaved)

Summary

Page properties

Content

@@ -287,11 +287,17 @@
  If you choose to bind an ig HMI, only the HMI bound by the current account will be displayed.
++**Object state modification**
--)Edit object settings;
++Double-click the object to open property window, modify the parameters, and save.
--4)Click [Save] to complete operation;
++[[image:image-20220715150846-2.jpeg]]
++**Object device modifcation**
++
++* **Common object:** you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object. If you modify the monitoring point, there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then all the monitoring point information of the box bound to the object will be cleared, and switch the binding type of the object from V-BOX to HMI.
++* Time object: Because HMI can't report the time, the monitoring equipment function of the time object can't be compatible with HMI, which is specially treated. When selecting the monitoring point of the monitoring equipment, there is only the option of smart box, and its multi-level grouping will only display smart box information; However, the explicit and implicit function of this component can still bind the screen device, but if the explicit and implicit monitoring point binding is carried out, the monitoring point binding at the monitoring device will be cleared.
++
  === 6.4.2 Introduction ===
  **1)Basic**