Skip to Content

Wiki source code of 02 Cloud SCADA

Version 24.10 by Stone Wu on 2022/07/15 15:25
Show last authors
1 = **1 Introduction** =
2
3 The default page of the V-BOX web SCADA platform after login is shown as below. The main functions of this platform include the centralized monitoring, template management, project management, and authority management. The user could switch between the function modules through the left navigation bar, and the specific content of each function module will be displayed on the right side.
4
5 (% style="text-align:center" %)
6 [[image:1617874482390-379.png||height="421" width="800" class="img-thumbnail"]]
7
8 **Introduction**
9
10 1. **Centralized monitoring:** project list, that is displayed in groups;
11 1. **Template management**: add and edit templates;
12 1. **Authority management:** assign a project with configuration authority for view-account
13
14 = 2 Log in =
15
16 Click Cloud SCADA under service in the upper right corner, or enter [[http:~~/~~/web.v-box.net/>>http://web.v-box.net/]] on browser.
17
18 [[image:image-20220714150826-1.jpeg]]
19
20 The account of the V-box web SCADA platform is the same as the V-BOX account.
21
22 (% style="text-align:center" %)
23 [[image:1617874518342-186.png||height="357" width="200" class="img-thumbnail"]]
24
25 (((
26 = **3 Centralized monitoring** =
27 )))
28
29 Centralized monitoring is the default home page of the platform. As shown as the figure below.
30
31 (% style="text-align:center" %)
32 [[image:1617874482390-379.png||height="421" width="800" class="img-thumbnail"]]
33
34 This page displays projects under each group by switching groups. You could add, delete and modify the group. In addition, you ccoul add or remove projects from groups, browse projects, and configure project parameters.
35
36 == Group management ==
37
38 The centralized monitoring module classifies the project by group.
39
40 [[image:image-20220714151453-2.jpeg||height="394" width="795"]]
41
42
43 1. **Switch group:** Click group name to switch group.
44 1. **Add a group:** Click [[image:V-BOX cloud configuration user manual_html_b2953a9d44427091.png||height="33" width="35" class="img-thumbnail"]] to add a new group.
45 1. **Edit group:** Click [[image:V-BOX cloud configuration user manual_html_516339bb09efc553.png||height="32" width="35" class="img-thumbnail"]] to edit the group name.
46 1. **Delete group:** Click [[image:V-BOX cloud configuration user manual_html_c92089cb54d385cd.png||height="33" width="35" class="img-thumbnail"]] to delete the current group.
47 1. **More group:** Click [[image:V-BOX cloud configuration user manual_html_df266f0fa8d8536e.png||height="33" width="35" class="img-thumbnail"]] to display the previous or next group.
48
49 == New project ==
50
51 Click "New project" on the upper right corner to create a new project. You could input the project name, select a group and whether it is cross-box.
52
53 [[image:image-20220715094953-3.jpeg]]
54
55 Click "Thumbnail" to upload a thumbnai. It will be displayed as the preview image of the project.
56
57 [[image:image-20220715094733-2.jpeg]]
58
59 (% class="box infomessage" %)
60 (((
61 **✎Note: ** A project can upload no thumbnails or up to one thumbnail. When no thumbnail is uploaded, the project list will be displayed with the system default image
62 )))
63
64 == Manage project ==
65
66 The centralized monitoring module includes the following functions: add new projects, delete projects and preview projects for each group. Click on the corresponding group to display the list of projects in the group, as shown below.[[image:image-20220715100603-4.jpeg]]
67
68 **Manage project:** Click "manage project" to assign a project in the group.
69
70 **Delete project: **Click [[image:1617948891768-154.png||class="img-thumbnail"]] on the upper right corner of a project thumbnail in the project list to move the project out of the group.
71
72 **Preview project:** Click on [[image:1617948906340-294.png||class="img-thumbnail"]] to view the configuration screen of the project.
73
74 **Display mode: ** You could switch the display mode by clicking the icons on the upper right corner of page, shown as below.
75
76 (% style="text-align:center" %)
77 [[image:image-20220715101053-5.jpeg]]
78
79 == Browse project ==
80
81 Click on [[image:1617948906340-294.png||class="img-thumbnail"]] in the project list to view the configuration screen.
82
83 (% style="text-align:center" %)
84 [[image:V-BOX cloud configuration user manual_html_72b4c2044c0ab2fe.png||height="365" width="600" class="img-thumbnail"]]
85
86 **Real-time data: **Click the "Real-time Data" to view the device name and state, current value, encoding, description, etc.
87
88 **Alarm data: **Click the "Alarm data" button to pop up the alarm record page and view the current alarm status and historical alarm information.
89
90 **Historical data:** Click the "History Data" button to pop up the history report interface of the data. You could view all the historical data.
91
92 **Multi-language:** multi-language drop-down menu, one object could support three language at the same time, you could switch language by this menu.
93
94 [[image:image-20220715101731-6.jpeg||height="50" width="50" class="img-thumbnail"]] Open or close the alarm sound of the alarm record object.
95
96 [[image:image-20220715101736-7.jpeg||height="52" width="51" class="img-thumbnail"]] Full screen display or restore configuration screen.
97
98 [[image:image-20220715101741-8.jpeg||height="51" width="50" class="img-thumbnail"]] Hide or show the top blue menu bar.
99
100 [[image:image-20220715101747-9.jpeg||height="50" width="50" class="img-thumbnail"]] Zoom in the screen.
101
102 [[image:image-20220715101753-10.jpeg||height="51" width="50" class="img-thumbnail"]] Zoom out the screen.
103
104 == Project setting ==
105
106 [[image:image-20220715103031-11.jpeg]]
107
108 [[image:image-20220715104640-1.jpeg||height="34" width="41"]]**Configuration design:** Click  the button  to enter the configuration programmer to design the configuration screen for that project. Please refer to [[5 V-box WEB SCADA design>>||anchor="H6V-boxWEBSCADAdesign"]] for details.
109
110 [[image:image-20220715104711-2.jpeg||height="32" width="40"]]**Preview project:** Click the project preview image or click the button to browse the configuration screen of the project.
111
112 [[image:image-20220715104745-3.jpeg]]**Login-free browse: **Click the button and set the expiration time in the pop-up box to generate the browsing address and QR code (scan to browse, but not to operate).
113
114 [[image:image-20220715104944-7.jpeg]]**Copy project:** Click the button to set the name and group of the new project to add a new project.
115
116 [[image:image-20220715105016-8.jpeg]]**Export project:** Click the button to export the project.
117
118 [[image:image-20220715105102-9.jpeg]]**Edit project:** Click the button to modify the project (project name and whether or not to cross V-BOX option), upload and delete thumbnails.
119
120 [[image:image-20220715105139-10.jpeg]]**Delete project:** Click the button to delete the project.
121
122 [[image:image-20220715105152-11.jpeg||height="36" width="43"]]**Assigned to a group: **Click the button to assign the project to a group.
123
124 = 4 Template =
125
126 == Template management ==
127
128 Click the template management module on the left menu to enter the template management module.
129
130 (% style="text-align:center" %)
131 [[image:1617949183137-615.png||height="205" width="800" class="img-thumbnail"]]
132
133 The V-box Web SCADA platform provides a template management module that could save the designed configuration screen as a template and user could import the template to design the project more efficiently.
134
135 [[image:image-20220715105925-1.jpeg||height="46" width="45"]]**Add template: **Click the button to add a template as below.
136
137 [[image:image-20220715110054-4.jpeg]]
138
139 [[image:image-20220715105933-2.jpeg||height="37" width="45"]]**Edit template: **Click the button to edit the name and resolution of the template.
140
141 [[image:image-20220715105937-3.jpeg||height="42" width="42"]]**Delete template: **Click the button to delete the template.
142
143 == Template design ==
144
145 Click the "Template Design" in the template list to access the V-box configuration platform editor page. You could edit the template in this page. More details about how to design the project please refer to [[5 V-box WEB SCADA design>>||anchor="H6V-boxWEBSCADAdesign"]].
146
147 (% class="box infomessage" %)
148 (((
149 **✎Note: **
150
151 * Only templates of the same resolution can be imported into the configuration screen of the project;
152 * Template design only supports single screen design;
153 * Template screen does not support import and export, preview, compile, import other templates, and bind monitoring point functions.
154 )))
155
156 (((
157 = **5 Web SCADA design** =
158 )))
159
160 == Main screen ==
161
162 Click "Design" (or Template design) in "Project Management" (or Template Management) screen to access WEB SCADA editor.
163
164 (% style="text-align:center" %)
165 [[image:1617949467765-343.png||height="393" width="800" class="img-thumbnail"]]
166
167 The function partition of WEB SCADA editor.
168
169 (% style="text-align:center" %)
170 [[image:V-box 1.png||alt="V-BOX cloud configuration user manual_html_cb0c19aefec34494.png" height="315" width="600" class="img-thumbnail"]]
171
172 1. **Toolbar:** A function bar that provides pages operations and objects operations;
173 1. **Project Manager:** It shows all screens for project and operations.
174 1. **Objects Library: **It provides 8 basic shapes objects and 20 common objects for creating SCADA page;
175 1. **Design Area: **Design area for SCADA page and template;
176
177 == Design process ==
178
179 1. Create new screen and set the property;
180 1. Select the object and drag the mouse in design area;
181 1. Edit object property and set the variable etc;
182 1. Save the screen;
183
184 == Screen management ==
185
186 A project or template is composed of one or several screens. A template contains only one screen, whereas a project can be composed of one or more screens (only take project as an example.). All screens are listed on "Project Manager". Select screen name, its page would be displayed on "Design Area".
187
188 [[image:image-20220715113713-9.jpeg]]
189
190 The screens are divided into normal screens and sub-screens, as shown above.
191
192 * The normal screen will be displayed when viewing a project or template.
193 * Sub-screen is embedded in the pop-up box of the normal screen, and the function switch and other objects are used to click the popup display.
194
195 In the project browsing page, the default display is the top common screen in the screen list, i.e., the main screen in the figure above, and the other screens will be switched through screen jumping or linking, etc.
196
197 **Create screens**
198
199 Click [[image:image-20220715114850-12.jpeg||height="30" width="48"]] to create a new screen. Set the porperties in the pop-up box, select the screen type (normal screen and sub-screen) and save.
200
201 [[image:image-20220715114601-11.jpeg]]
202
203 (% class="box infomessage" %)
204 (((
205 **✎Note:** When a thumbnail page is not created, the default picture would be displayed on "Centralized Monitoring".
206 )))
207
208 **Modifying screen**
209
210 1. Select the page to be modified;
211 1. Click [[image:V-BOX cloud configuration user manual_html_a5f920d2d144472c.png||height="30" width="30" class="img-thumbnail"]] on "Project Manager" or [[image:V-BOX cloud configuration user manual_html_56ae321f2d4418ac.png||height="24" width="147" class="img-thumbnail"]] on "Toolbar";
212 1. Modify screen on [Design Area];
213 1. Click [[image:V-BOX cloud configuration user manual_html_5970eb09902bd1a3.png||height="30" width="30" class="img-thumbnail"]] on "Toolbar" to complete modification;
214
215 **Deleting screen**
216
217 1. Select screen on "Project Manager";
218 1. Click[[image:V-BOX cloud configuration user manual_html_dca942a0244f9912.png||height="29" width="30"]] , and following message would pop up to prevent accidental deletion;
219
220 (% style="text-align:center" %)
221 [[image:V-BOX cloud configuration user manual_html_1e7f9096426ebeca.png||height="161" width="300" class="img-thumbnail"]]
222
223 (% start="3" %)
224 1. Click "OK" to delete page.
225
226 **Sort screen**
227
228 1. Select page screen on "Project Manager";
229 1. Click [[image:V-BOX cloud configuration user manual_html_1ab5c888bfd536c.png||height="25" width="53"]] to sort screen upwards or downwards.
230
231 (% class="box infomessage" %)
232 (((
233 **✎Note:** Thumbnail does not support sorting.
234 )))
235
236 == Object ==
237
238 The Web SCADA platform provides a variety of visualizations for users to design screen. All objects listed on "Object Library“.
239
240 The screen is made up of objects.All the objects are provided in the object bar, and control points will appear around all the objects selected in the canvas.
241
242 Only the special attributes of the objects are listed for explanation, and the basic attributes of the objects, such as position, style, lock, etc., are not listed.
243
244 === Adding object ===
245
246 1. Select and click the object on ”Objects Library“;
247 1. Move the cursor to the "Design Area";
248 1. When cursor changes as + symbol, hold down left click draw the desired size;
249
250 The initial object is bound to V-BOX by default, and its monitoring point information list also displays V-BOX by default. After device switching, the device type of the last binding will be remembered. When the monitoring point information of the object is opened next time, it will be displayed according to the current type, and operations such as copying the object will also give the newly copied object the same binding type as the original object.
251
252 **Current object: **If you click a object, it will be in the selected state, that is, the current part.** **Control points with red background and black edge will appear around the current obejct.
253
254 **Selected object:** Click the blank space of the canvas, left-click the mouse to select an area, or hold down the Ctrl key and click the desired part. Objects with red or white dots around them are collectively referred to as selected parts.
255
256 [[image:image-20220715141718-1.jpeg]]
257
258 === Moving object ===
259
260 1. Select object on "Design Area";
261 1. Hold down the left click and move object to desired position.
262
263 (% style="text-align:center" %)
264 [[image:V-BOX cloud configuration user manual_html_4a7ca599f8cf89c5.png||height="141" width="200" class="img-thumbnail"]]
265
266 === Scaling object ===
267
268 1. Select object, the positioning control point would appear around object;
269 1. Click any control point;
270 1. Move point to scale object.
271
272 === Editing object ===
273
274 **Select device type**
275
276 Double-click the object to open property window, and click the button [[image:image-20220715144518-2.jpeg]] to select the device to be bound. One object can only bind one device type.
277
278 (% class="box infomessage" %)
279 (((
280 **✎Note:** If the SCADA project is selected as cross-box, then all the objects in the project can bind to V-BOX or ig series HMI.
281 )))
282
283 (% style="text-align:center" %)
284 [[image:V-BOX cloud configuration user manual_html_45a8e3cf3e1113fe.png||height="352" width="600" class="img-thumbnail"]]
285
286 If you choose V-BOX, the HMI of the current account will be filtered out in the multi-level grouping of the device selection drop-down box, and only the V-BOX bound to the current account will be displayed.
287
288 If you choose to bind an ig HMI, only the HMI bound by the current account will be displayed.
289
290 **Object state modification**
291
292 Double-click the object to open property window, modify the parameters, and save.
293
294 [[image:image-20220715150846-2.jpeg]]
295
296 **Object device modifcation**
297
298 * **Common object:** you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object. If you modify the monitoring point, there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then all the monitoring point information of the box bound to the object will be cleared, and switch the binding type of the object from V-BOX to HMI.
299 * **Time object: **Because HMI can't report the time, the monitoring equipment function of the time object can't be compatible with HMI. Therefore, when selecting the monitoring point of the monitoring device, there is only the option of V-BOX, and its multi-level grouping will only display the information of V-BOX. The display and hide function of this object can still bind HMI, but if the display and hide monitoring points are bound, the monitoring point binding to the monitoring device will be cleared.
300 * **Alarm record object:** In the alarm record, because the operation of binding monitoring point is different from other components, no matter what the binding type before the component is, when switching between box and screen, a switching reminder will be given.
301
302 === 6.4.2 Introduction ===
303
304 **1)Basic**
305
306 (% style="text-align:center" %)
307 [[image:1617949894556-149.png||height="402" width="250" class="img-thumbnail"]]
308
309 Figure 6 ‑10
310
311 * **Line: **a common line, user could set color, line type and thickness for it;
312
313 * **Rectangles: **User could set transparency, Rounded Conner, color of filled and border, line type and thickness for it;
314
315 * **Circle:** User could set transparency, color of filled and border, line type and thickness for it.
316
317 * **Ellipse: **User could set transparency, color of filled and border, line type and thickness for it.
318
319 * **Triangle: **User could set transparency, color of filled and border, line type and thickness for it.
320
321 * **Text: **It is used for displaying text content. User could set text styles, background styles, also it supports three languages at the same time.
322
323 * **Picture: **It is used for displaying the picture, support the user defined picture.
324
325 (% class="table-bordered" %)
326 |=(% scope="row" %)**Property**|=**Description**
327 |=Gallery|Choose the picture from the gallery
328 |=Angle|Rotation angle (0~~360)
329 |=Scale|(((
330 Yes: the aspect ratio is fixed
331
332 No: the aspect ratio is not fixed
333 )))
334
335 **2)Common**
336
337 (% style="text-align:center" %)
338 [[image:V-BOX cloud configuration user manual_html_c84a5d0032df07e2.png||height="420" width="250" class="img-thumbnail"]]
339
340 * **Display Frame**
341
342 |**Item**|**Description**
343 |Monitoring Point|Set operating address for this object (Read and write can be different);
344 |Read-write permission|There are three modes for it, users could select according to requirements;
345 |Set Text|It is used for setting style of text and display direction
346 |Style|It is used for setting object display, like background color;
347 |Expansion|It is used for setting expansion function, like lock position;
348 |Display|It is used for setting object position and size
349
350 * **Bit /Word Indicator**
351
352 Indicator could monitor and display the specified PLC or HMI bit address, and its state changes according to the specified address value.
353
354 (((
355 |**Items**|**Description**
356 |Monitor Point|Set reading address for this object;
357 |Status|Set text for every status;
358 |Picture|Set picture for every status;
359 |Expansion|Set display expansion function, such as blink
360 |Display|Set object position and size
361 )))
362
363 * **Bit/ Word Switch**
364
365 Switch could operate the specified PLC or HMI bit address, and its state changes according to the specified address value.
366
367 (((
368 |**Items**|**Description**
369 |Monitor Point|Set operating address for this object (Read and write can be different);
370 |Read-write permission|There are three modes for it, users could select according to requirements;
371 |Pop up a confirmation box|Check it to enable confirmation box for operating;
372 |Status|Set text for every status;
373 |Picture|Set picture for every status;
374 |Expansion|Set display expansion function, such as blink
375 |Display|Set object position and size
376 )))
377
378 * **Dashboard**
379
380 Display the value of address in real time using the dashboard.
381
382 (((
383 |**Items**|**Description**
384 |Monitor Point|Set operating address for this object (Read and write can be different);
385 |Select|Set dashboard display range, there are two modes, Constant and Variable
386 |Scale value|Check it to display value;
387 |Select Language|Set text for object;
388 |Style|Set object display style such as color, scales number;
389 |Alarm Zone|Set range and color for alarm
390 |Display|Set object position and size
391 )))
392
393 * **Bar graph**
394
395 Use the length or height of the rectangle to reflect the value of reading address so that the value could be visualized.
396
397 (((
398 |**Items**|**Description**
399 |Monitor Point|Set operating address for this object (Read and write can be different);
400 |Digit Display|Check it to display digit value on bar;
401 |Progress bar direction|Select display direction;
402 |Scales|Set object scales display type and color;
403 |Bar color|Set color for bar;
404 |Background Display|Set color of bar background;
405 |Alarm Zone|Set range and color for alarm
406 |Display|Set object position and size
407 )))
408
409 * **Real-Time Trend Chart**
410
411 Use the curve to show the trend of the data over time. X-axis is time, Y-axis is variable.
412
413 (((
414 |**Items**|**Description**
415 |Monitor Point|Set operating address for this object (Read and write can be different);
416 |Digit Display|Check it to display digit value on bar;
417 |Progress bar direction|Select display direction;
418 |Scales|Set object scales display type and color;
419 |Bar color|Set color for bar;
420 |Background Display|Set color of bar background;
421 |Alarm Zone|Set range and color for alarm
422 |Display|Set object position and size
423 | |
424 )))
425
426 * **Flow pipe**
427
428 This is a flowing animation object, users could set animation trigger condition for it, the monitor point could be both bit address and word address;
429
430 (((
431 |**Items**|**Description**
432 |Border color|Set object background color;
433 |Color|Set flowing block color;
434 |Speed|Three modes for flowing block speed;
435 |Flow direction|Two modes for flowing direction;
436 |Monitor Point|Set trigger address;
437 |Trigger Condition|(((
438 Bit address: Select ON or OFF;
439
440 Word address: Set value range;
441 )))
442 |Color Block Width|Set flowing block size;
443 |Color Block Length|Set flowing block size;
444 |Color Block Spacing|Set the spacing between flow blocks;
445 |Display Border|Select display or hide border;
446 |Alarm Zone|Set range and color for alarm
447 |Display|Set object position and size
448 )))
449
450 **Tips for designing flow bar**
451
452 When user need to simulate the flow of water in a pipe, please put the pipe picture at first, then hide the flow border and place it onto the pipe picture.
453
454 * **Video object**
455
456 Video object is used for playing the video file provided in the video source.
457
458 (((
459 |**Items**|**Description**
460 |Border color|Set object background color;
461 |Color|Set flowing block color;
462 |Speed|Three modes for flowing block speed;
463 |Flow direction|Two modes for flowing direction;
464 |Monitor Point|Set trigger address;
465 |Trigger Condition|(((
466 Bit address: Select ON or OFF;
467
468 Word address: Set value range;
469 )))
470 |Color Block Width|Set flowing block size;
471 |Color Block Length|Set flowing block size;
472 |Color Block Spacing|Set the spacing between flow blocks;
473 |Display Border|Select display or hide border;
474 |Alarm Zone|Set range and color for alarm
475 |Display|Set object position and size
476 )))
477
478 * **Hyperlink**
479
480 The object for link website;
481
482 (((
483 |=**Items**|=**Description**
484 |Link address|Enter website;
485 |Open with|There are two options, user could select open with new window or current window;
486 |Select Language|One object could support three language, user could enter text for note object;
487 |Style|Set object display style such as color, use picture as background or not
488 |Display|Set object position and size
489 )))
490
491 * **Function Switch**
492
493 Function switch is designed to switch screens, and call and close sub screen.
494
495 (((
496 |=**Items**|=**Description**
497 |Screen|Select the target screen for switch;
498 |Sub-screen|There are two options, user could select open with new window or current window;
499 |Previous|Switch to the previous screen
500 |Next|Switch to the next screen
501 |Return|Return to the screen before switch
502 |Text|Set text for object, including text font, color direction and so on;
503 |Style|Set object display style such as color, use picture as background or not
504 |Display|Set object position and size
505 )))
506
507 * **Combination Switch**
508
509 The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of user.
510
511 (((
512 |=**Items**|=**Description**
513 |Bit operation|It provides [Bit copy], [Set ON], [Set OFF], [Switch] and [Bit Copy] functions.
514 |Word operation|It provides [Word copy], [Word set], [Increase] and [Decrease] functions,
515 |Arithmetic|[Add], [Subtract], [Multiply] and [Divide] functions
516 |Screen change|It provides screen switch function as [Function Switch], it supports [Previous], [Next], [Return], [Change to], and open, close sub-screen operations
517 |Delete|Delete selected item function;
518 |Empty|Delete all items in operation list;
519 |Up|Move the selected item up one row in operation list;
520 |Down|Move the selected item down one row in operation list;
521 )))
522
523 **Time**
524
525 It is used for displaying the time of the V-BOX, when the V-BOX is offline, the time will stay at the time when it is offline.
526
527 (((
528 |=**Items**|=**Description**
529 |Monitoring box|Link a box for the time part
530 |Pattern|Two types, one is digit and the other is clock
531 |Format settings|Set format for time and date in digit pattern
532 |Background|Set display or hide background of object
533 |Set text|Set text display style;
534 |Display|Set object position and size
535 )))
536
537 **Histogram**
538
539 It is used for display more than one tag value in Bar graph format.
540
541 (((
542 |=**Items**|=**Description**
543 |Add new group|Maximum is 8, add items for this object, also set colors
544 |Add monitoring point|Set read tag for every item,
545 |Style|Set object display style such as color, use picture as background or not
546 |Display|Set object position and size
547 )))
548
549 **Alarm record display**
550
551 It is used for display alarm information of V-BOX. It can support current and history alarm.
552
553 (((
554 |=**Items**|=**Description**
555 |Select box|Link to V-BOX
556 |Alarm type|Select current alarm or history alarm or all
557 |Start date|Alarm display start date
558 |End date|Alarm display end date
559 |Format|Set display format for date and time
560 |Sequence|It provides two type, one is order, and the other is reverse order
561 |Display content|Users could select display contents by check them
562 |Style|Set colors for different parts
563 |Display|Set object position and size
564 )))
565
566 **History trend chart**
567
568 The history trend will display data record with graph. X axis represents as time, and Y axis represents as data.
569
570 (((
571 |=(% colspan="2" %)**Items**|=**Description**
572 |(% colspan="2" %)Basic|Set numbers of curve in object and select style for every curves including color, link tag
573 |(% rowspan="11" %)Style|Display form|Two type, one is curve, and the other is table
574 |Start date|Start date of history data
575 |End date|End date of history data
576 |Format|Time and date format for display
577 |Sequence|Two types, order or reverse order
578 |Y range|Two types, fixed and adaptive
579 |Set text|Set font size, color and other styles.
580 |Transparency|Set transparency of object
581 |Background color|Two types, translucent or transparent
582 |Gradient way|Set display way and color
583 |Display bar|Check it to display screen bar
584 |(% colspan="2" %)Display|Set object position and size
585 )))
586
587 **Indirect screen display**
588
589 This object is used for calling screens when condition is met.
590
591 (((
592 |=(% colspan="2" %)**Items**|=**Description**
593 |(% rowspan="4" %)Basic|Conditional trigger|It provides bit, word condition and unconditional
594 |Bind monitoring point|Link to tag for triggering
595 |Trigger condition|for bit address, it requires ON or OFF, for word address, different value corresponds to different screens.
596 |Designated screen|Only for bit address as trigger. When condition is met, display this screen
597 |(% colspan="2" %)Style|Set object display style such as display title bar or display or hide background
598 |(% colspan="2" %)Display|Set object position and size
599 )))
600
601 **Ring chart**
602
603 Display value as ring chart
604
605 (((
606 |=(% colspan="2" %)**Items**|=**Description**
607 |(% rowspan="7" %)Basic|Monitor point|Link to tag for data reading
608 |Range|Set fixed range or variable range
609 |Scales|Set scales such as major and minor numbers, colors and so on
610 |Designated screen|Only for bit address as trigger. When condition is met, display this screen
611 |Numerical scale display|Check it to display scale
612 |Start angle|Set start angle for scale
613 |Color|Color setting for bar and background
614 |(% colspan="2" %)Alarm Zone|Set alarm range and colors
615 |(% colspan="2" %)Display|Set object position and size
616 )))
617
618 **Pie chart**
619
620 Display more than one value in one pie chart
621
622 (((
623 |=(% colspan="2" %)**Items**|=**Description**
624 |(% colspan="2" %)Monitor point|Add read addresses, the maximum is 8
625 |(% rowspan="3" %)Style|Pattern|Set alarm range and colors
626 |Numerical scale|Check it to display value in object
627 |Monitoring name display|Check it to display name in object
628 |(% colspan="2" %)Display|Set object position and size
629 )))
630
631 == **6.5 Tool bar** ==
632
633 The toolbar has the same function as the tool list. (right-click on the canvas to pop up tool list)
634
635 (((
636 |=**Tool**|=**Description**
637 |[[image:V-BOX cloud configuration user manual_html_668218d361cc54ba.png||height="21" width="76" class="img-thumbnail"]]|Mouse tool for selecting parts. Hold Ctrl key and click on the part to select multiple parts at the same time.
638 |[[image:V-BOX cloud configuration user manual_html_867a000ba1161424.png||height="21" width="69" class="img-thumbnail"]]|Save current canvas
639 |[[image:V-BOX cloud configuration user manual_html_f5dbf6b889320d6c.png||height="21" width="81" class="img-thumbnail"]]|Delete the selected parts. Multiple selected parts can be deleted at the same time.
640 |[[image:V-BOX cloud configuration user manual_html_e5d36271faf64986.png||height="21" width="73" class="img-thumbnail"]]|Copy the selected parts.
641 |[[image:V-BOX cloud configuration user manual_html_97033b77500d6b5e.png||height="21" width="75" class="img-thumbnail"]]|Paste the selected parts
642 |[[image:V-BOX cloud configuration user manual_html_53bc6f617b145720.png||height="22" width="148" class="img-thumbnail"]]|The property of the current screen
643 |[[image:V-BOX cloud configuration user manual_html_44a3e98a692aee6a.png||height="21" width="157" class="img-thumbnail"]]|Import the configured template for the current screen
644 |[[image:V-BOX cloud configuration user manual_html_30f2f1591b0a9e66.png||height="22" width="89" class="img-thumbnail"]]|Browse the current project interface. The default home page is the top screen in the project page list.
645 |[[image:V-BOX cloud configuration user manual_html_6aae3377add443ff.png||height="38" width="150" class="img-thumbnail"]]|Align left edge of multiple parts
646 |[[image:V-BOX cloud configuration user manual_html_dc8fb256a13e2f91.png||height="40" width="150" class="img-thumbnail"]]|Align right edge of multiple parts
647 |[[image:V-BOX cloud configuration user manual_html_bec295f2d25219f9.png||height="39" width="150" class="img-thumbnail"]]|Align top edge of multiple parts
648 |[[image:V-BOX cloud configuration user manual_html_4a0c10157943d534.png||height="39" width="150" class="img-thumbnail"]]|Align bottom edge of multiple parts
649 |[[image:V-BOX cloud configuration user manual_html_378cd8ba635ed3f4.png||height="38" width="150" class="img-thumbnail"]]|Place the selected part on top of the other parts
650 |[[image:V-BOX cloud configuration user manual_html_6a594344368f5276.png||height="38" width="150" class="img-thumbnail"]]|Place the selected part on the bottom of the other parts
651 )))
652
653 (((
654 = **7 Authority** =
655 )))
656
657 Click the Authority management on the left menu to enter the Authority management module, as Figure 7-1 shows.
658
659 [[image:1617949992819-138.png||class="img-thumbnail"]]
660
661 Figure 7 ‑11
662
663 This module is used for assigning project and configuring permissions for sub-accounts.
664
665 **1)How to assign project for sub-account**
666
667 * Click the button [[image:V-BOX cloud configuration user manual_html_d96aea12cdb7cdb1.png||height="26" width="150" class="img-thumbnail"]] at the end of the sub-account line to enter the project list page of the sub-account, as shown in Figure 7-2.
668 * Click the button [[image:V-BOX cloud configuration user manual_html_5fd249946ccb44cc.png||height="34" width="150" class="img-thumbnail"]] on the top right corner of window, select the project of the pop window and then click save to get the permissions of the selected project for the account, as shown in Figure 7-3.
669
670 (% style="text-align:center" %)
671 [[image:1617934946822-979.png||height="421" width="800" class="img-thumbnail"]]
672
673 Figure 7 ‑2
674
675 (% style="text-align:center" %)
676 [[image:1617950026178-538.png||height="375" width="600" class="img-thumbnail"]]
677
678 Figure 7 ‑3
679
680 **2)How to unassigned project for sub-account**
681
682 In the list of assigned projects in the sub-account, click “Unbind Project” to unbind the project for the account.
683
684 = **8 Demo account** =
685
686 **1)What is Cloud SCADA platform?**
687
688 Cloud SCADA is an IoT platform that can realize terminal equipment data collection, real-time control, alarm push, group management, configuration design and other functions. With this platform, users can monitor terminal equipment more conveniently.
689
690 **2)How to access?**
691
692 Asean URL: [[http:~~/~~/asean.v-box.net/web/htmlnew/user/login.html>>url:http://asean.v-box.net/web/htmlnew/user/login.html]]
693
694 Asean account&password: weconuser 123123
695
696 EU URL: [[http:~~/~~/eu.v-box.net/web/htmlnew/user/login.html>>url:http://eu.v-box.net/web/htmlnew/user/login.html]]
697
698 EU account&password: weconuser weconuser123
699 **✎Note1: **users can edit Cloud SCADA project freely, and the modified results will not be saved.
700
701 **✎Note2: **users can enter the Cloud SCADA page by clicking the following positions:
702
703 (% style="text-align:center" %)
704 [[image:1648577581177-590.png||height="408" width="800" class="img-thumbnail"]]
705
706 **3)Industry classification**
707
708 There are 20 Cloud SCADA projects created in demo account, including HVAC system, water treatment system, smart farm, smart factory and smart city.
709
710 (% style="text-align:center" %)
711 [[image:1648577644453-821.png||height="377" width="800" class="img-thumbnail"]]
712
713 **4)Part of the project introduction**
714
715 4.1 Heating Monitoring System
716
717 Collect the analog signals of the temperature, pressure and flow rate of the outlet water of the heat exchanger, and use PID to control the valve diameter of the heat exchanger and the rotation speed of the circulating pump to achieve the purpose of automatic temperature adjustment.
718
719 (% style="text-align:center" %)
720 [[image:1648577724164-599.png||height="393" width="800" class="img-thumbnail"]]
721
722 (% style="text-align:center" %)
723 [[image:1648577744837-247.png||height="450" width="800" class="img-thumbnail"]]
724
725 4.2 Water Treatment System
726
727 Industry introduction: water treatment system.Mainly to improve waterquality, to meet certain water quality standards, such as drinking water, industrial wastewater discharge.In order to ensure the stable operation of the water treatment system, it is necessary to monitor the water pressure and water level, and adjust the   appropriate water pressure and water level by remote control of the pumpspeed.
728
729 (% style="text-align:center" %)
730 [[image:1648577778435-311.png||height="450" width="800" class="img-thumbnail"]]
731
732 4.3 Smart City Monitoring
733
734 The multi-functional city monitoring system can be applied to multiple scenarios such as HVAC, factory, and pump station monitoring. Monitor and control common industrial parameters such as voltage, current, power, frequency, temperature, liquid level, etc.
735
736 (% style="text-align:center" %)
737 [[image:1648577825813-481.png||height="452" width="800" class="img-thumbnail"]]
738
739 (% style="text-align:center" %)
740 [[image:1648577843849-690.png||height="452" width="800" class="img-thumbnail"]]
741
742 4.4 Smart Building Monitoring
743
744 It is used in community management to monitor various facilities in the community such as elevator equipment, lighting system, parking lot, fire fighting equipment, etc. In the event of an abnormality in the equipment, such as elevator damage, insufficient fire water, etc., an alarm prompt is sent to the manager.
745
746 (% style="text-align:center" %)
747 [[image:1648577874801-932.png||height="408" width="800" class="img-thumbnail"]]
748
749 (% style="text-align:center" %)
750 [[image:1648577894932-957.png||height="408" width="800" class="img-thumbnail"]]