Skip to Content

Wiki source code of 02 Cloud SCADA

Version 24.8 by Stone Wu on 2022/07/15 15:15
Show last authors
1 = **1 Introduction** =
2
3 The default page of the V-BOX web SCADA platform after login is shown as below. The main functions of this platform include the centralized monitoring, template management, project management, and authority management. The user could switch between the function modules through the left navigation bar, and the specific content of each function module will be displayed on the right side.
4
5 (% style="text-align:center" %)
6 [[image:1617874482390-379.png||height="421" width="800" class="img-thumbnail"]]
7
8 **Introduction**
9
10 1. **Centralized monitoring:** project list, that is displayed in groups;
11 1. **Template management**: add and edit templates;
12 1. **Authority management:** assign a project with configuration authority for view-account
13
14 = 2 Log in =
15
16 Click Cloud SCADA under service in the upper right corner, or enter [[http:~~/~~/web.v-box.net/>>http://web.v-box.net/]] on browser.
17
18 [[image:image-20220714150826-1.jpeg]]
19
20 The account of the V-box web SCADA platform is the same as the V-BOX account.
21
22 (% style="text-align:center" %)
23 [[image:1617874518342-186.png||height="357" width="200" class="img-thumbnail"]]
24
25 (((
26 = **3 Centralized monitoring** =
27 )))
28
29 Centralized monitoring is the default home page of the platform. As shown as the figure below.
30
31 (% style="text-align:center" %)
32 [[image:1617874482390-379.png||height="421" width="800" class="img-thumbnail"]]
33
34 This page displays projects under each group by switching groups. You could add, delete and modify the group. In addition, you ccoul add or remove projects from groups, browse projects, and configure project parameters.
35
36 == Group management ==
37
38 The centralized monitoring module classifies the project by group.
39
40 [[image:image-20220714151453-2.jpeg||height="394" width="795"]]
41
42
43 1. **Switch group:** Click group name to switch group.
44 1. **Add a group:** Click [[image:V-BOX cloud configuration user manual_html_b2953a9d44427091.png||height="33" width="35" class="img-thumbnail"]] to add a new group.
45 1. **Edit group:** Click [[image:V-BOX cloud configuration user manual_html_516339bb09efc553.png||height="32" width="35" class="img-thumbnail"]] to edit the group name.
46 1. **Delete group:** Click [[image:V-BOX cloud configuration user manual_html_c92089cb54d385cd.png||height="33" width="35" class="img-thumbnail"]] to delete the current group.
47 1. **More group:** Click [[image:V-BOX cloud configuration user manual_html_df266f0fa8d8536e.png||height="33" width="35" class="img-thumbnail"]] to display the previous or next group.
48
49 == New project ==
50
51 Click "New project" on the upper right corner to create a new project. You could input the project name, select a group and whether it is cross-box.
52
53 [[image:image-20220715094953-3.jpeg]]
54
55 Click "Thumbnail" to upload a thumbnai. It will be displayed as the preview image of the project.
56
57 [[image:image-20220715094733-2.jpeg]]
58
59 (% class="box infomessage" %)
60 (((
61 **✎Note: ** A project can upload no thumbnails or up to one thumbnail. When no thumbnail is uploaded, the project list will be displayed with the system default image
62 )))
63
64 == Manage project ==
65
66 The centralized monitoring module includes the following functions: add new projects, delete projects and preview projects for each group. Click on the corresponding group to display the list of projects in the group, as shown below.[[image:image-20220715100603-4.jpeg]]
67
68 **Manage project:** Click "manage project" to assign a project in the group.
69
70 **Delete project: **Click [[image:1617948891768-154.png||class="img-thumbnail"]] on the upper right corner of a project thumbnail in the project list to move the project out of the group.
71
72 **Preview project:** Click on [[image:1617948906340-294.png||class="img-thumbnail"]] to view the configuration screen of the project.
73
74 **Display mode: ** You could switch the display mode by clicking the icons on the upper right corner of page, shown as below.
75
76 (% style="text-align:center" %)
77 [[image:image-20220715101053-5.jpeg]]
78
79 == Browse project ==
80
81 Click on [[image:1617948906340-294.png||class="img-thumbnail"]] in the project list to view the configuration screen.
82
83 (% style="text-align:center" %)
84 [[image:V-BOX cloud configuration user manual_html_72b4c2044c0ab2fe.png||height="365" width="600" class="img-thumbnail"]]
85
86 **Real-time data: **Click the "Real-time Data" to view the device name and state, current value, encoding, description, etc.
87
88 **Alarm data: **Click the "Alarm data" button to pop up the alarm record page and view the current alarm status and historical alarm information.
89
90 **Historical data:** Click the "History Data" button to pop up the history report interface of the data. You could view all the historical data.
91
92 **Multi-language:** multi-language drop-down menu, one object could support three language at the same time, you could switch language by this menu.
93
94 [[image:image-20220715101731-6.jpeg||height="50" width="50" class="img-thumbnail"]] Open or close the alarm sound of the alarm record object.
95
96 [[image:image-20220715101736-7.jpeg||height="52" width="51" class="img-thumbnail"]] Full screen display or restore configuration screen.
97
98 [[image:image-20220715101741-8.jpeg||height="51" width="50" class="img-thumbnail"]] Hide or show the top blue menu bar.
99
100 [[image:image-20220715101747-9.jpeg||height="50" width="50" class="img-thumbnail"]] Zoom in the screen.
101
102 [[image:image-20220715101753-10.jpeg||height="51" width="50" class="img-thumbnail"]] Zoom out the screen.
103
104 == Project setting ==
105
106 [[image:image-20220715103031-11.jpeg]]
107
108 [[image:image-20220715104640-1.jpeg||height="34" width="41"]]**Configuration design:** Click  the button  to enter the configuration programmer to design the configuration screen for that project. Please refer to [[5 V-box WEB SCADA design>>||anchor="H6V-boxWEBSCADAdesign"]] for details.
109
110 [[image:image-20220715104711-2.jpeg||height="32" width="40"]]**Preview project:** Click the project preview image or click the button to browse the configuration screen of the project.
111
112 [[image:image-20220715104745-3.jpeg]]**Login-free browse: **Click the button and set the expiration time in the pop-up box to generate the browsing address and QR code (scan to browse, but not to operate).
113
114 [[image:image-20220715104944-7.jpeg]]**Copy project:** Click the button to set the name and group of the new project to add a new project.
115
116 [[image:image-20220715105016-8.jpeg]]**Export project:** Click the button to export the project.
117
118 [[image:image-20220715105102-9.jpeg]]**Edit project:** Click the button to modify the project (project name and whether or not to cross V-BOX option), upload and delete thumbnails.
119
120 [[image:image-20220715105139-10.jpeg]]**Delete project:** Click the button to delete the project.
121
122 [[image:image-20220715105152-11.jpeg||height="36" width="43"]]**Assigned to a group: **Click the button to assign the project to a group.
123
124 = 4 Template =
125
126 == Template management ==
127
128 Click the template management module on the left menu to enter the template management module.
129
130 (% style="text-align:center" %)
131 [[image:1617949183137-615.png||height="205" width="800" class="img-thumbnail"]]
132
133 The V-box Web SCADA platform provides a template management module that could save the designed configuration screen as a template and user could import the template to design the project more efficiently.
134
135 [[image:image-20220715105925-1.jpeg||height="46" width="45"]]**Add template: **Click the button to add a template as below.
136
137 [[image:image-20220715110054-4.jpeg]]
138
139 [[image:image-20220715105933-2.jpeg||height="37" width="45"]]**Edit template: **Click the button to edit the name and resolution of the template.
140
141 [[image:image-20220715105937-3.jpeg||height="42" width="42"]]**Delete template: **Click the button to delete the template.
142
143 == Template design ==
144
145 Click the "Template Design" in the template list to access the V-box configuration platform editor page. You could edit the template in this page. More details about how to design the project please refer to [[5 V-box WEB SCADA design>>||anchor="H6V-boxWEBSCADAdesign"]].
146
147 (% class="box infomessage" %)
148 (((
149 **✎Note: **
150
151 * Only templates of the same resolution can be imported into the configuration screen of the project;
152 * Template design only supports single screen design;
153 * Template screen does not support import and export, preview, compile, import other templates, and bind monitoring point functions.
154 )))
155
156 (((
157 = **5 Web SCADA design** =
158 )))
159
160 == Main screen ==
161
162 Click "Design" (or Template design) in "Project Management" (or Template Management) screen to access WEB SCADA editor.
163
164 (% style="text-align:center" %)
165 [[image:1617949467765-343.png||height="393" width="800" class="img-thumbnail"]]
166
167 The function partition of WEB SCADA editor.
168
169 (% style="text-align:center" %)
170 [[image:V-box 1.png||alt="V-BOX cloud configuration user manual_html_cb0c19aefec34494.png" height="315" width="600" class="img-thumbnail"]]
171
172 1. **Toolbar:** A function bar that provides pages operations and objects operations;
173 1. **Project Manager:** It shows all screens for project and operations.
174 1. **Objects Library: **It provides 8 basic shapes objects and 20 common objects for creating SCADA page;
175 1. **Design Area: **Design area for SCADA page and template;
176
177 == Design process ==
178
179 1. Create new screen and set the property;
180 1. Select the object and drag the mouse in design area;
181 1. Edit object property and set the variable etc;
182 1. Save the screen;
183
184 == Screen management ==
185
186 A project or template is composed of one or several screens. A template contains only one screen, whereas a project can be composed of one or more screens (only take project as an example.). All screens are listed on "Project Manager". Select screen name, its page would be displayed on "Design Area".
187
188 [[image:image-20220715113713-9.jpeg]]
189
190 The screens are divided into normal screens and sub-screens, as shown above.
191
192 * The normal screen will be displayed when viewing a project or template.
193 * Sub-screen is embedded in the pop-up box of the normal screen, and the function switch and other objects are used to click the popup display.
194
195 In the project browsing page, the default display is the top common screen in the screen list, i.e., the main screen in the figure above, and the other screens will be switched through screen jumping or linking, etc.
196
197 **Create screens**
198
199 Click [[image:image-20220715114850-12.jpeg||height="30" width="48"]] to create a new screen. Set the porperties in the pop-up box, select the screen type (normal screen and sub-screen) and save.
200
201 [[image:image-20220715114601-11.jpeg]]
202
203 (% class="box infomessage" %)
204 (((
205 **✎Note:** When a thumbnail page is not created, the default picture would be displayed on "Centralized Monitoring".
206 )))
207
208 **Modifying screen**
209
210 1. Select the page to be modified;
211 1. Click [[image:V-BOX cloud configuration user manual_html_a5f920d2d144472c.png||height="30" width="30" class="img-thumbnail"]] on "Project Manager" or [[image:V-BOX cloud configuration user manual_html_56ae321f2d4418ac.png||height="24" width="147" class="img-thumbnail"]] on "Toolbar";
212 1. Modify screen on [Design Area];
213 1. Click [[image:V-BOX cloud configuration user manual_html_5970eb09902bd1a3.png||height="30" width="30" class="img-thumbnail"]] on "Toolbar" to complete modification;
214
215 **Deleting screen**
216
217 1. Select screen on "Project Manager";
218 1. Click[[image:V-BOX cloud configuration user manual_html_dca942a0244f9912.png||height="29" width="30"]] , and following message would pop up to prevent accidental deletion;
219
220 (% style="text-align:center" %)
221 [[image:V-BOX cloud configuration user manual_html_1e7f9096426ebeca.png||height="161" width="300" class="img-thumbnail"]]
222
223 (% start="3" %)
224 1. Click "OK" to delete page.
225
226 **Sort screen**
227
228 1. Select page screen on "Project Manager";
229 1. Click [[image:V-BOX cloud configuration user manual_html_1ab5c888bfd536c.png||height="25" width="53"]] to sort screen upwards or downwards.
230
231 (% class="box infomessage" %)
232 (((
233 **✎Note:** Thumbnail does not support sorting.
234 )))
235
236 == Object ==
237
238 The Web SCADA platform provides a variety of visualizations for users to design screen. All objects listed on "Object Library“.
239
240 The screen is made up of objects.All the objects are provided in the object bar, and control points will appear around all the objects selected in the canvas.
241
242 Only the special attributes of the objects are listed for explanation, and the basic attributes of the objects, such as position, style, lock, etc., are not listed.
243
244 === Adding object ===
245
246 1. Select and click the object on ”Objects Library“;
247 1. Move the cursor to the "Design Area";
248 1. When cursor changes as + symbol, hold down left click draw the desired size;
249
250 The initial object is bound to V-BOX by default, and its monitoring point information list also displays V-BOX by default. After device switching, the device type of the last binding will be remembered. When the monitoring point information of the object is opened next time, it will be displayed according to the current type, and operations such as copying the object will also give the newly copied object the same binding type as the original object.
251
252 **Current object: **If you click a object, it will be in the selected state, that is, the current part.** **Control points with red background and black edge will appear around the current obejct.
253
254 **Selected object:** Click the blank space of the canvas, left-click the mouse to select an area, or hold down the Ctrl key and click the desired part. Objects with red or white dots around them are collectively referred to as selected parts.
255
256 [[image:image-20220715141718-1.jpeg]]
257
258 === Moving object ===
259
260 1. Select object on "Design Area";
261 1. Hold down the left click and move object to desired position.
262
263 (% style="text-align:center" %)
264 [[image:V-BOX cloud configuration user manual_html_4a7ca599f8cf89c5.png||height="141" width="200" class="img-thumbnail"]]
265
266 === Scaling object ===
267
268 1. Select object, the positioning control point would appear around object;
269 1. Click any control point;
270 1. Move point to scale object.
271
272 === Editing object ===
273
274 **Select device type**
275
276 Double-click the object to open property window, and click the button [[image:image-20220715144518-2.jpeg]] to select the device to be bound. One object can only bind one device type.
277
278 (% class="box infomessage" %)
279 (((
280 **✎Note:** If the SCADA project is selected as cross-box, then all the objects in the project can bind to V-BOX or ig series HMI.
281 )))
282
283 (% style="text-align:center" %)
284 [[image:V-BOX cloud configuration user manual_html_45a8e3cf3e1113fe.png||height="352" width="600" class="img-thumbnail"]]
285
286 If you choose V-BOX, the HMI of the current account will be filtered out in the multi-level grouping of the device selection drop-down box, and only the V-BOX bound to the current account will be displayed.
287
288 If you choose to bind an ig HMI, only the HMI bound by the current account will be displayed.
289
290 **Object state modification**
291
292 Double-click the object to open property window, modify the parameters, and save.
293
294 **Object device modifcation**
295
296 Common object: you have bound the monitoring point information belonging to the V-BOX at the monitoring monitoring point of the object, and the user needs to modify the monitoring point with the binding device type as screen in the component, and there will be a reminder to confirm the switching device binding type. (If "Clear Original Configuration" is selected, then we will clear the monitoring point information of the box bound before the component, and switch the binding type of the component from smart box to screen.
297
298 [[image:image-20220715150846-2.jpeg]]
299
300 === 6.4.2 Introduction ===
301
302 **1)Basic**
303
304 (% style="text-align:center" %)
305 [[image:1617949894556-149.png||height="402" width="250" class="img-thumbnail"]]
306
307 Figure 6 ‑10
308
309 * **Line: **a common line, user could set color, line type and thickness for it;
310
311 * **Rectangles: **User could set transparency, Rounded Conner, color of filled and border, line type and thickness for it;
312
313 * **Circle:** User could set transparency, color of filled and border, line type and thickness for it.
314
315 * **Ellipse: **User could set transparency, color of filled and border, line type and thickness for it.
316
317 * **Triangle: **User could set transparency, color of filled and border, line type and thickness for it.
318
319 * **Text: **It is used for displaying text content. User could set text styles, background styles, also it supports three languages at the same time.
320
321 * **Picture: **It is used for displaying the picture, support the user defined picture.
322
323 (% class="table-bordered" %)
324 |=(% scope="row" %)**Property**|=**Description**
325 |=Gallery|Choose the picture from the gallery
326 |=Angle|Rotation angle (0~~360)
327 |=Scale|(((
328 Yes: the aspect ratio is fixed
329
330 No: the aspect ratio is not fixed
331 )))
332
333 **2)Common**
334
335 (% style="text-align:center" %)
336 [[image:V-BOX cloud configuration user manual_html_c84a5d0032df07e2.png||height="420" width="250" class="img-thumbnail"]]
337
338 * **Display Frame**
339
340 |**Item**|**Description**
341 |Monitoring Point|Set operating address for this object (Read and write can be different);
342 |Read-write permission|There are three modes for it, users could select according to requirements;
343 |Set Text|It is used for setting style of text and display direction
344 |Style|It is used for setting object display, like background color;
345 |Expansion|It is used for setting expansion function, like lock position;
346 |Display|It is used for setting object position and size
347
348 * **Bit /Word Indicator**
349
350 Indicator could monitor and display the specified PLC or HMI bit address, and its state changes according to the specified address value.
351
352 (((
353 |**Items**|**Description**
354 |Monitor Point|Set reading address for this object;
355 |Status|Set text for every status;
356 |Picture|Set picture for every status;
357 |Expansion|Set display expansion function, such as blink
358 |Display|Set object position and size
359 )))
360
361 * **Bit/ Word Switch**
362
363 Switch could operate the specified PLC or HMI bit address, and its state changes according to the specified address value.
364
365 (((
366 |**Items**|**Description**
367 |Monitor Point|Set operating address for this object (Read and write can be different);
368 |Read-write permission|There are three modes for it, users could select according to requirements;
369 |Pop up a confirmation box|Check it to enable confirmation box for operating;
370 |Status|Set text for every status;
371 |Picture|Set picture for every status;
372 |Expansion|Set display expansion function, such as blink
373 |Display|Set object position and size
374 )))
375
376 * **Dashboard**
377
378 Display the value of address in real time using the dashboard.
379
380 (((
381 |**Items**|**Description**
382 |Monitor Point|Set operating address for this object (Read and write can be different);
383 |Select|Set dashboard display range, there are two modes, Constant and Variable
384 |Scale value|Check it to display value;
385 |Select Language|Set text for object;
386 |Style|Set object display style such as color, scales number;
387 |Alarm Zone|Set range and color for alarm
388 |Display|Set object position and size
389 )))
390
391 * **Bar graph**
392
393 Use the length or height of the rectangle to reflect the value of reading address so that the value could be visualized.
394
395 (((
396 |**Items**|**Description**
397 |Monitor Point|Set operating address for this object (Read and write can be different);
398 |Digit Display|Check it to display digit value on bar;
399 |Progress bar direction|Select display direction;
400 |Scales|Set object scales display type and color;
401 |Bar color|Set color for bar;
402 |Background Display|Set color of bar background;
403 |Alarm Zone|Set range and color for alarm
404 |Display|Set object position and size
405 )))
406
407 * **Real-Time Trend Chart**
408
409 Use the curve to show the trend of the data over time. X-axis is time, Y-axis is variable.
410
411 (((
412 |**Items**|**Description**
413 |Monitor Point|Set operating address for this object (Read and write can be different);
414 |Digit Display|Check it to display digit value on bar;
415 |Progress bar direction|Select display direction;
416 |Scales|Set object scales display type and color;
417 |Bar color|Set color for bar;
418 |Background Display|Set color of bar background;
419 |Alarm Zone|Set range and color for alarm
420 |Display|Set object position and size
421 | |
422 )))
423
424 * **Flow pipe**
425
426 This is a flowing animation object, users could set animation trigger condition for it, the monitor point could be both bit address and word address;
427
428 (((
429 |**Items**|**Description**
430 |Border color|Set object background color;
431 |Color|Set flowing block color;
432 |Speed|Three modes for flowing block speed;
433 |Flow direction|Two modes for flowing direction;
434 |Monitor Point|Set trigger address;
435 |Trigger Condition|(((
436 Bit address: Select ON or OFF;
437
438 Word address: Set value range;
439 )))
440 |Color Block Width|Set flowing block size;
441 |Color Block Length|Set flowing block size;
442 |Color Block Spacing|Set the spacing between flow blocks;
443 |Display Border|Select display or hide border;
444 |Alarm Zone|Set range and color for alarm
445 |Display|Set object position and size
446 )))
447
448 **Tips for designing flow bar**
449
450 When user need to simulate the flow of water in a pipe, please put the pipe picture at first, then hide the flow border and place it onto the pipe picture.
451
452 * **Video object**
453
454 Video object is used for playing the video file provided in the video source.
455
456 (((
457 |**Items**|**Description**
458 |Border color|Set object background color;
459 |Color|Set flowing block color;
460 |Speed|Three modes for flowing block speed;
461 |Flow direction|Two modes for flowing direction;
462 |Monitor Point|Set trigger address;
463 |Trigger Condition|(((
464 Bit address: Select ON or OFF;
465
466 Word address: Set value range;
467 )))
468 |Color Block Width|Set flowing block size;
469 |Color Block Length|Set flowing block size;
470 |Color Block Spacing|Set the spacing between flow blocks;
471 |Display Border|Select display or hide border;
472 |Alarm Zone|Set range and color for alarm
473 |Display|Set object position and size
474 )))
475
476 * **Hyperlink**
477
478 The object for link website;
479
480 (((
481 |=**Items**|=**Description**
482 |Link address|Enter website;
483 |Open with|There are two options, user could select open with new window or current window;
484 |Select Language|One object could support three language, user could enter text for note object;
485 |Style|Set object display style such as color, use picture as background or not
486 |Display|Set object position and size
487 )))
488
489 * **Function Switch**
490
491 Function switch is designed to switch screens, and call and close sub screen.
492
493 (((
494 |=**Items**|=**Description**
495 |Screen|Select the target screen for switch;
496 |Sub-screen|There are two options, user could select open with new window or current window;
497 |Previous|Switch to the previous screen
498 |Next|Switch to the next screen
499 |Return|Return to the screen before switch
500 |Text|Set text for object, including text font, color direction and so on;
501 |Style|Set object display style such as color, use picture as background or not
502 |Display|Set object position and size
503 )))
504
505 * **Combination Switch**
506
507 The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of user.
508
509 (((
510 |=**Items**|=**Description**
511 |Bit operation|It provides [Bit copy], [Set ON], [Set OFF], [Switch] and [Bit Copy] functions.
512 |Word operation|It provides [Word copy], [Word set], [Increase] and [Decrease] functions,
513 |Arithmetic|[Add], [Subtract], [Multiply] and [Divide] functions
514 |Screen change|It provides screen switch function as [Function Switch], it supports [Previous], [Next], [Return], [Change to], and open, close sub-screen operations
515 |Delete|Delete selected item function;
516 |Empty|Delete all items in operation list;
517 |Up|Move the selected item up one row in operation list;
518 |Down|Move the selected item down one row in operation list;
519 )))
520
521 **Time**
522
523 It is used for displaying the time of the V-BOX, when the V-BOX is offline, the time will stay at the time when it is offline.
524
525 (((
526 |=**Items**|=**Description**
527 |Monitoring box|Link a box for the time part
528 |Pattern|Two types, one is digit and the other is clock
529 |Format settings|Set format for time and date in digit pattern
530 |Background|Set display or hide background of object
531 |Set text|Set text display style;
532 |Display|Set object position and size
533 )))
534
535 **Histogram**
536
537 It is used for display more than one tag value in Bar graph format.
538
539 (((
540 |=**Items**|=**Description**
541 |Add new group|Maximum is 8, add items for this object, also set colors
542 |Add monitoring point|Set read tag for every item,
543 |Style|Set object display style such as color, use picture as background or not
544 |Display|Set object position and size
545 )))
546
547 **Alarm record display**
548
549 It is used for display alarm information of V-BOX. It can support current and history alarm.
550
551 (((
552 |=**Items**|=**Description**
553 |Select box|Link to V-BOX
554 |Alarm type|Select current alarm or history alarm or all
555 |Start date|Alarm display start date
556 |End date|Alarm display end date
557 |Format|Set display format for date and time
558 |Sequence|It provides two type, one is order, and the other is reverse order
559 |Display content|Users could select display contents by check them
560 |Style|Set colors for different parts
561 |Display|Set object position and size
562 )))
563
564 **History trend chart**
565
566 The history trend will display data record with graph. X axis represents as time, and Y axis represents as data.
567
568 (((
569 |=(% colspan="2" %)**Items**|=**Description**
570 |(% colspan="2" %)Basic|Set numbers of curve in object and select style for every curves including color, link tag
571 |(% rowspan="11" %)Style|Display form|Two type, one is curve, and the other is table
572 |Start date|Start date of history data
573 |End date|End date of history data
574 |Format|Time and date format for display
575 |Sequence|Two types, order or reverse order
576 |Y range|Two types, fixed and adaptive
577 |Set text|Set font size, color and other styles.
578 |Transparency|Set transparency of object
579 |Background color|Two types, translucent or transparent
580 |Gradient way|Set display way and color
581 |Display bar|Check it to display screen bar
582 |(% colspan="2" %)Display|Set object position and size
583 )))
584
585 **Indirect screen display**
586
587 This object is used for calling screens when condition is met.
588
589 (((
590 |=(% colspan="2" %)**Items**|=**Description**
591 |(% rowspan="4" %)Basic|Conditional trigger|It provides bit, word condition and unconditional
592 |Bind monitoring point|Link to tag for triggering
593 |Trigger condition|for bit address, it requires ON or OFF, for word address, different value corresponds to different screens.
594 |Designated screen|Only for bit address as trigger. When condition is met, display this screen
595 |(% colspan="2" %)Style|Set object display style such as display title bar or display or hide background
596 |(% colspan="2" %)Display|Set object position and size
597 )))
598
599 **Ring chart**
600
601 Display value as ring chart
602
603 (((
604 |=(% colspan="2" %)**Items**|=**Description**
605 |(% rowspan="7" %)Basic|Monitor point|Link to tag for data reading
606 |Range|Set fixed range or variable range
607 |Scales|Set scales such as major and minor numbers, colors and so on
608 |Designated screen|Only for bit address as trigger. When condition is met, display this screen
609 |Numerical scale display|Check it to display scale
610 |Start angle|Set start angle for scale
611 |Color|Color setting for bar and background
612 |(% colspan="2" %)Alarm Zone|Set alarm range and colors
613 |(% colspan="2" %)Display|Set object position and size
614 )))
615
616 **Pie chart**
617
618 Display more than one value in one pie chart
619
620 (((
621 |=(% colspan="2" %)**Items**|=**Description**
622 |(% colspan="2" %)Monitor point|Add read addresses, the maximum is 8
623 |(% rowspan="3" %)Style|Pattern|Set alarm range and colors
624 |Numerical scale|Check it to display value in object
625 |Monitoring name display|Check it to display name in object
626 |(% colspan="2" %)Display|Set object position and size
627 )))
628
629 == **6.5 Tool bar** ==
630
631 The toolbar has the same function as the tool list. (right-click on the canvas to pop up tool list)
632
633 (((
634 |=**Tool**|=**Description**
635 |[[image:V-BOX cloud configuration user manual_html_668218d361cc54ba.png||height="21" width="76" class="img-thumbnail"]]|Mouse tool for selecting parts. Hold Ctrl key and click on the part to select multiple parts at the same time.
636 |[[image:V-BOX cloud configuration user manual_html_867a000ba1161424.png||height="21" width="69" class="img-thumbnail"]]|Save current canvas
637 |[[image:V-BOX cloud configuration user manual_html_f5dbf6b889320d6c.png||height="21" width="81" class="img-thumbnail"]]|Delete the selected parts. Multiple selected parts can be deleted at the same time.
638 |[[image:V-BOX cloud configuration user manual_html_e5d36271faf64986.png||height="21" width="73" class="img-thumbnail"]]|Copy the selected parts.
639 |[[image:V-BOX cloud configuration user manual_html_97033b77500d6b5e.png||height="21" width="75" class="img-thumbnail"]]|Paste the selected parts
640 |[[image:V-BOX cloud configuration user manual_html_53bc6f617b145720.png||height="22" width="148" class="img-thumbnail"]]|The property of the current screen
641 |[[image:V-BOX cloud configuration user manual_html_44a3e98a692aee6a.png||height="21" width="157" class="img-thumbnail"]]|Import the configured template for the current screen
642 |[[image:V-BOX cloud configuration user manual_html_30f2f1591b0a9e66.png||height="22" width="89" class="img-thumbnail"]]|Browse the current project interface. The default home page is the top screen in the project page list.
643 |[[image:V-BOX cloud configuration user manual_html_6aae3377add443ff.png||height="38" width="150" class="img-thumbnail"]]|Align left edge of multiple parts
644 |[[image:V-BOX cloud configuration user manual_html_dc8fb256a13e2f91.png||height="40" width="150" class="img-thumbnail"]]|Align right edge of multiple parts
645 |[[image:V-BOX cloud configuration user manual_html_bec295f2d25219f9.png||height="39" width="150" class="img-thumbnail"]]|Align top edge of multiple parts
646 |[[image:V-BOX cloud configuration user manual_html_4a0c10157943d534.png||height="39" width="150" class="img-thumbnail"]]|Align bottom edge of multiple parts
647 |[[image:V-BOX cloud configuration user manual_html_378cd8ba635ed3f4.png||height="38" width="150" class="img-thumbnail"]]|Place the selected part on top of the other parts
648 |[[image:V-BOX cloud configuration user manual_html_6a594344368f5276.png||height="38" width="150" class="img-thumbnail"]]|Place the selected part on the bottom of the other parts
649 )))
650
651 (((
652 = **7 Authority** =
653 )))
654
655 Click the Authority management on the left menu to enter the Authority management module, as Figure 7-1 shows.
656
657 [[image:1617949992819-138.png||class="img-thumbnail"]]
658
659 Figure 7 ‑11
660
661 This module is used for assigning project and configuring permissions for sub-accounts.
662
663 **1)How to assign project for sub-account**
664
665 * Click the button [[image:V-BOX cloud configuration user manual_html_d96aea12cdb7cdb1.png||height="26" width="150" class="img-thumbnail"]] at the end of the sub-account line to enter the project list page of the sub-account, as shown in Figure 7-2.
666 * Click the button [[image:V-BOX cloud configuration user manual_html_5fd249946ccb44cc.png||height="34" width="150" class="img-thumbnail"]] on the top right corner of window, select the project of the pop window and then click save to get the permissions of the selected project for the account, as shown in Figure 7-3.
667
668 (% style="text-align:center" %)
669 [[image:1617934946822-979.png||height="421" width="800" class="img-thumbnail"]]
670
671 Figure 7 ‑2
672
673 (% style="text-align:center" %)
674 [[image:1617950026178-538.png||height="375" width="600" class="img-thumbnail"]]
675
676 Figure 7 ‑3
677
678 **2)How to unassigned project for sub-account**
679
680 In the list of assigned projects in the sub-account, click “Unbind Project” to unbind the project for the account.
681
682 = **8 Demo account** =
683
684 **1)What is Cloud SCADA platform?**
685
686 Cloud SCADA is an IoT platform that can realize terminal equipment data collection, real-time control, alarm push, group management, configuration design and other functions. With this platform, users can monitor terminal equipment more conveniently.
687
688 **2)How to access?**
689
690 Asean URL: [[http:~~/~~/asean.v-box.net/web/htmlnew/user/login.html>>url:http://asean.v-box.net/web/htmlnew/user/login.html]]
691
692 Asean account&password: weconuser 123123
693
694 EU URL: [[http:~~/~~/eu.v-box.net/web/htmlnew/user/login.html>>url:http://eu.v-box.net/web/htmlnew/user/login.html]]
695
696 EU account&password: weconuser weconuser123
697 **✎Note1: **users can edit Cloud SCADA project freely, and the modified results will not be saved.
698
699 **✎Note2: **users can enter the Cloud SCADA page by clicking the following positions:
700
701 (% style="text-align:center" %)
702 [[image:1648577581177-590.png||height="408" width="800" class="img-thumbnail"]]
703
704 **3)Industry classification**
705
706 There are 20 Cloud SCADA projects created in demo account, including HVAC system, water treatment system, smart farm, smart factory and smart city.
707
708 (% style="text-align:center" %)
709 [[image:1648577644453-821.png||height="377" width="800" class="img-thumbnail"]]
710
711 **4)Part of the project introduction**
712
713 4.1 Heating Monitoring System
714
715 Collect the analog signals of the temperature, pressure and flow rate of the outlet water of the heat exchanger, and use PID to control the valve diameter of the heat exchanger and the rotation speed of the circulating pump to achieve the purpose of automatic temperature adjustment.
716
717 (% style="text-align:center" %)
718 [[image:1648577724164-599.png||height="393" width="800" class="img-thumbnail"]]
719
720 (% style="text-align:center" %)
721 [[image:1648577744837-247.png||height="450" width="800" class="img-thumbnail"]]
722
723 4.2 Water Treatment System
724
725 Industry introduction: water treatment system.Mainly to improve waterquality, to meet certain water quality standards, such as drinking water, industrial wastewater discharge.In order to ensure the stable operation of the water treatment system, it is necessary to monitor the water pressure and water level, and adjust the   appropriate water pressure and water level by remote control of the pumpspeed.
726
727 (% style="text-align:center" %)
728 [[image:1648577778435-311.png||height="450" width="800" class="img-thumbnail"]]
729
730 4.3 Smart City Monitoring
731
732 The multi-functional city monitoring system can be applied to multiple scenarios such as HVAC, factory, and pump station monitoring. Monitor and control common industrial parameters such as voltage, current, power, frequency, temperature, liquid level, etc.
733
734 (% style="text-align:center" %)
735 [[image:1648577825813-481.png||height="452" width="800" class="img-thumbnail"]]
736
737 (% style="text-align:center" %)
738 [[image:1648577843849-690.png||height="452" width="800" class="img-thumbnail"]]
739
740 4.4 Smart Building Monitoring
741
742 It is used in community management to monitor various facilities in the community such as elevator equipment, lighting system, parking lot, fire fighting equipment, etc. In the event of an abnormality in the equipment, such as elevator damage, insufficient fire water, etc., an alarm prompt is sent to the manager.
743
744 (% style="text-align:center" %)
745 [[image:1648577874801-932.png||height="408" width="800" class="img-thumbnail"]]
746
747 (% style="text-align:center" %)
748 [[image:1648577894932-957.png||height="408" width="800" class="img-thumbnail"]]