Changes for page 06 VPN pass-through

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 11 added, 0 removed)
  • 4G 联网.png
  • LAN 口.png
  • plc 直连.png
  • wifi 不直连.png
  • wifi 直连.png
  • wifi.png
  • 介绍.png
  • 分配的动态IP.png
  • 动态联网.png
  • 联网方式.png
  • 静态联网.png

Details

Page properties

Content

...	...	@@ -1,141 +1,188 @@
1		-= **1 **Two modes of Pass-through =
	1	+== 1 VPN pass-through ==
2	2
3		-* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
	3	+**Functional overview**：VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
4	4
5	5	(% style="text-align:center" %)
6		-[[image:动态IP.png||alt="动态穿透.png"]]
	6	+[[image:介绍.png]]
7	7
8		-{{info}}
9		-✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
10		-{{/info}}
	8	+(% class="wikigeneratedid" id="HDevicelist" %)
	9	+**~ Device list**
11	11
	11	+* Display all support VPN pass-through devices under current account
12	12	* (((
13		-(% class="wikigeneratedid" %)
14		-Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
	13	+Right-click menu, search box is consistent with PLC pass-through
15	15	)))
16	16
17		-(% style="text-align:center" %)
18		-[[image:静态IP.png||alt="静态穿透.png"]]
	16	+(% class="wikigeneratedid" id="HRemoteLANIP" %)
	17	+**~ Remote LAN IP**
19	19
20		-= **2 The mode of Box connecting to the cloud** =
	19	+VPN pass-through required parameters, DHCP/Static IP of pass-through IP
21	21
22		-Wecon VPN pass-through currently supports the following three pass-through modes：
	21	+(% class="wikigeneratedid" id="HDeviceinformation" %)
	22	+**~ Device information**
23	23
24		-* Ethernet (Networking)
25		-* WIFI (Networking) +Ethernet
26		-* 4G (Networking) +Ethernet
	24	+Display device machine code, name, device status and other information
27	27
	26	+(% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
	27	+**Start pass-through/End pass-through**
	28	+
	29	+* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
	30	+* Click End pass-through to end VPN pass-through
	31	+* When the device is offline, the Start pass-through button cannot be clicked
	32	+* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
	33	+* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
	34	+* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
	35	+* (((
	36	+After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
	37	+
28	28	{{info}}
29		-✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
	39	+✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
30	30	{{/info}}
	41	+)))
31	31
	43	+(% class="wikigeneratedid" id="HRefresh" %)
	44	+**Refresh**
32	32
33		-(% style="text-align:center" %)
34		-[[image:Ethernet setting.png]]
	46	+Right-click in the blank area of the device list to pop up the global operation menu.
35	35
36		-=== ** Configure Ethernet networking** ===
	48	+Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
37	37
38		-When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
	50	+(% class="wikigeneratedid" id="HStatustype" %)
	51	+**Status type**
39	39
40		-The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
	53	+There are 5 status of device in the Wecon VPN pass-through tool.
41	41
42		-(% style="text-align:center" %)
43		-[[image:Ethernet.png||alt="Ethernet setting.png"]]
	55	+* Offline(Gray): Pass-through cannot be performed.
	56	+* Online(Green): Pass-through can be performed.
	57	+* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
	58	+* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
	59	+* Ending VPN pass-through(Blue): VPN pass-through is ending.
44	44
45		-=== ** Configure Ethernet and WIFI networking** ===
	61	+(% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
	62	+**How to choose the pass-through IP of the PC.**
46	46
47		-At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.
	64	+For PLC and PC LANs using the different network segment.
48	48
49		-[[image:1688622050993-253.png]]
	66	+* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
	67	+* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
50	50
51		-=== ** Configure Ethernet and 4G networking** ===
	69	+For PLC and PC LANs using the same network segment.
52	52
53		-At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.
	71	+* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
	72	+* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
54	54
55		-(% style="text-align:center" %)
56		-[[image:4G.png]]
	74	+{{info}}
	75	+**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
	76	+{{/info}}
57	57
58		-= **2 VPN **pass-through =
	78	+== **2 **Two modes of Pass-through ==
59	59
	80	+* **DHCP**: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
	81	+
60	60	(% style="text-align:center" %)
61		-[[image:VPN pass.png]]
	83	+[[image:动态IP.png||alt="动态穿透.png"]]
62	62
63		-**Functional overview**
	85	+{{info}}
	86	+✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
	87	+{{/info}}
64	64
65		-VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
66		-
67		-=== ** Device list** ===
68		-
69		-* Display all support VPN pass-through devices under current account
70	70	* (((
71		-Right-click menu, search box is consistent with PLC pass-through
	90	+(% class="wikigeneratedid" %)
	91	+**Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
72	72	)))
73	73
74		-=== ** Remote LAN IP** ===
	94	+(% style="text-align:center" %)
	95	+[[image:静态IP.png||alt="静态穿透.png"]]
75	75
76		-VPN pass-through required parameters, DHCP/Static IP of pass-through IP
	97	+= **3 The networking methods supported by VPN** =
77	77
78		-=== ** Device information** ===
	99	+(% style="text-align:center" %)
	100	+[[image:联网方式.png]]
79	79
80		-Display device machine code, name, device status and other information
	102	+=== **（1）Configure Ethernet networking：DHCP** ===
81	81
82		-=== **Start pass-through/End pass-through** ===
	104	+(% style="text-align:center" %)
	105	+[[image:动态联网.png]]
83	83
84		-* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
85		-* Click End pass-through to end VPN pass-through
86		-* When the device is offline, the Start pass-through button cannot be clicked
87		-* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
88		-* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
89		-* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
	107	+(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
	108	+This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
	109	+
	110	+(% style="text-align:center" %)
	111	+[[image:分配的动态IP.png]]
	112	+
	113	+(% class="wikigeneratedid" %)
	114	+At that time using VPN Pass-through：
	115	+
90	90	* (((
91		-After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
	117	+VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
	118	+)))
	119	+* (((
	120	+Static IP: please customize the generated IP address.
	121	+)))
92	92
	123	+=== **（2）Configure Ethernet networking：Static IP** ===
	124	+
	125	+(% style="text-align:center" %)
	126	+[[image:静态联网.png]]
	127	+
93	93	{{info}}
94		-✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
	129	+✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
95	95	{{/info}}
	131	+
	132	+(% class="wikigeneratedid" %)
	133	+At that time using VPN Pass-through：
	134	+
	135	+* (((
	136	+VPN DCHP：After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
96	96	)))
	138	+* (((
	139	+Static IP: please customize the generated IP address.
	140	+)))
97	97
98		-=== **Refresh** ===
	142	+=== **（3）Configure WIFI networking** ===
99	99
100		-Right-click in the blank area of the device list to pop up the global operation menu.
	144	+When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
101	101
102		-Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
	146	+The following two connections are available：
103	103
104		-=== **Status type** ===
	148	+（1）
105	105
106		-There are 5 status of device in the Wecon VPN pass-through tool.
107	107
108		-* Offline(Gray): Pass-through cannot be performed.
109		-* Online(Green): Pass-through can be performed.
110		-* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
111		-* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
112		-* Ending VPN pass-through(Blue): VPN pass-through is ending.
	151	+(% style="text-align:center" %)
	152	+[[image:wifi 不直连.png]]
113	113
114		-= **3 Operating Steps** =
	154	+（2）
115	115
116		-Select device in the device list. You can select "DHCP" or "Static IP".
	156	+(% style="text-align:center" %)
	157	+[[image:wifi 直连.png]]
117	117
118		-* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
119		-* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
	159	+(% class="wikigeneratedid" id="H" %)
	160	+**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.
120	120
121	121	(% style="text-align:center" %)
122		-[[image:static VPN.png||height="434" width="1186"]]
	163	+[[image:wifi.png]]
123	123
	165	+(% class="wikigeneratedid" %)
	166	+At that time using VPN Pass-through：
124	124
125		-**How to choose the pass-through IP of the PC.**
	168	+* (((
	169	+VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
	170	+)))
	171	+* (((
	172	+Static IP: please customize the generated IP address：192.168.**50**.XXX
	173	+)))
126	126
127		-For PLC and PC LANs using the different network segment.
	175	+=== **（4）Configure  4G networking** ===
128	128
129		-* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
130		-* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
	177	+please refer to WIFI setting
131	131
132		-For PLC and PC LANs using the same network segment.
	179	+(% style="text-align:center" %)
	180	+[[image:4G 联网.png]]
133	133
134		-* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
135		-* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
136	136
137		-{{info}}
138		-**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
139		-{{/info}}
	183	+= 4 Use the LAN port for communication =
140	140
141		-= 4 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
	185	+(% style="text-align:center" %)
	186	+[[image:LAN 口.png]]
	187	+
	188	+= 5 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =

4G 联网.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.8 KB

Content

LAN 口.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+42.9 KB

Content

plc 直连.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+18.8 KB

Content

wifi 不直连.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.5 KB

Content

wifi 直连.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.1 KB

Content

wifi.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+62.9 KB

Content

介绍.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.3 KB

Content

分配的动态IP.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+29.0 KB

Content

动态联网.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.7 KB

Content

联网方式.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.5 KB

Content

静态联网.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.5 KB

Content