Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 22.1
edited by Theodore Xu
on 2023/07/18 14:37
Change comment: There is no comment for this version
To version 13.1
edited by Theodore Xu
on 2023/07/07 09:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,92 +1,27 @@
1 -= **1 VPN **pass-through introduce =
1 += **1 Enable Ethernet** =
2 2  
3 -**Functional overview**
3 +Wecon VPN pass-through currently supports the following three pass-through modes：
4 4  
5 -VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
5 +* Ethernet (Networking)
6 +* WIFI (Networking) +Ethernet
7 +* 4G (Networking) +Ethernet
6 6  
7 -=== ** Device list** ===
8 -
9 -* Display all support VPN pass-through devices under current account
10 -* (((
11 -Right-click menu, search box is consistent with PLC pass-through
12 -)))
13 -
14 -=== ** Remote LAN IP** ===
15 -
16 -VPN pass-through required parameters, DHCP/Static IP of pass-through IP
17 -
18 -=== ** Device information** ===
19 -
20 -Display device machine code, name, device status and other information
21 -
22 -=== **Start pass-through/End pass-through** ===
23 -
24 -* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
25 -* Click End pass-through to end VPN pass-through
26 -* When the device is offline, the Start pass-through button cannot be clicked
27 -* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
28 -* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
29 -* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
30 -* (((
31 -After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
32 -
33 33  {{info}}
34 -✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
10 +✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
35 35  {{/info}}
36 -)))
37 37  
38 -=== **Refresh** ===
39 39  
40 -Right-click in the blank area of the device list to pop up the global operation menu.
41 -
42 -Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
43 -
44 -=== **Status type** ===
45 -
46 -There are 5 status of device in the Wecon VPN pass-through tool.
47 -
48 -* Offline(Gray): Pass-through cannot be performed.
49 -* Online(Green): Pass-through can be performed.
50 -* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
51 -* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
52 -* Ending VPN pass-through(Blue): VPN pass-through is ending.
53 -
54 -= **2 **Two modes of Pass-through =
55 -
56 -* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
57 -
58 58  (% style="text-align:center" %)
59 -[[image:动态IP.png||alt="动态穿透.png"]]
60 -
61 -{{info}}
62 -✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
63 -{{/info}}
64 -
65 -* (((
66 -(% class="wikigeneratedid" %)
67 -Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
68 -)))
69 -
70 -(% style="text-align:center" %)
71 -[[image:静态IP.png||alt="静态穿透.png"]]
72 -
73 -= **5 The mode of Box connecting to the cloud** =
74 -
75 -(% style="text-align:center" %)
76 -[[image:联网方式.png]]
77 -
78 -
79 -(% style="text-align:center" %)
80 80  [[image:Ethernet setting.png]]
81 81  
82 82  === ** Configure Ethernet networking** ===
83 83  
84 -When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
19 +When using Ethernet for cloud, need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
85 85  
86 86  The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
87 87  
88 88  (% style="text-align:center" %)
89 -[[image:Ethernet.png||alt="Ethernet setting.png"]]
24 +[[image:Ethernet setting.png]]
90 90  
91 91  === ** Configure Ethernet and WIFI networking** ===
92 92  
... ... @@ -101,7 +101,7 @@
101 101  (% style="text-align:center" %)
102 102  [[image:4G.png]]
103 103  
104 -= **1 VPN **pass-through =
39 += **2 VPN **pass-through =
105 105  
106 106  (% style="text-align:center" %)
107 107  [[image:VPN pass.png]]
Ethernet.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
企业微信截图_16896591499557.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.9 KB
Content
动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
动态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content
联网方式.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
静态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.7 KB
Content
静态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content