Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 3.1
edited by Theodore Xu
on 2023/07/06 14:04
Change comment: There is no comment for this version
To version 23.1
edited by Theodore Xu
on 2023/07/18 14:38
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -VPN passthrough
1 +6 VPN pass-through
Content
... ... @@ -1,44 +1,108 @@
1 -= **1 Enable Ethernet** =
1 += **1 VPN **pass-through introduce =
2 2  
3 -Wecon VPN pass-through currently supports the following three pass-through modes：
3 +=== **Functional overview** ===
4 4  
5 -* Ethernet (Networking)
6 -* WIFI (Networking) +Ethernet
7 -* 4G (Networking) +Ethernet
5 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
8 8  
7 +=== ** Device list** ===
8 +
9 +* Display all support VPN pass-through devices under current account
10 +* (((
11 +Right-click menu, search box is consistent with PLC pass-through
12 +)))
13 +
14 +=== ** Remote LAN IP** ===
15 +
16 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
17 +
18 +=== ** Device information** ===
19 +
20 +Display device machine code, name, device status and other information
21 +
22 +=== **Start pass-through/End pass-through** ===
23 +
24 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
25 +* Click End pass-through to end VPN pass-through
26 +* When the device is offline, the Start pass-through button cannot be clicked
27 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
28 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
29 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
30 +* (((
31 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
32 +
9 9  {{info}}
10 -✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
34 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
11 11  {{/info}}
36 +)))
12 12  
38 +=== **Refresh** ===
13 13  
40 +Right-click in the blank area of the device list to pop up the global operation menu.
41 +
42 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
43 +
44 +=== **Status type** ===
45 +
46 +There are 5 status of device in the Wecon VPN pass-through tool.
47 +
48 +* Offline(Gray): Pass-through cannot be performed.
49 +* Online(Green): Pass-through can be performed.
50 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
51 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
52 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
53 +
54 += **2 **Two modes of Pass-through =
55 +
56 +* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
57 +
14 14  (% style="text-align:center" %)
59 +[[image:动态IP.png||alt="动态穿透.png"]]
60 +
61 +{{info}}
62 +✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
63 +{{/info}}
64 +
65 +* (((
66 +(% class="wikigeneratedid" %)
67 +Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
68 +)))
69 +
70 +(% style="text-align:center" %)
71 +[[image:静态IP.png||alt="静态穿透.png"]]
72 +
73 += **5 The mode of Box connecting to the cloud** =
74 +
75 +(% style="text-align:center" %)
76 +[[image:联网方式.png]]
77 +
78 +
79 +(% style="text-align:center" %)
15 15  [[image:Ethernet setting.png]]
16 16  
17 17  === ** Configure Ethernet networking** ===
18 18  
19 -When using Ethernet for networking, Preferred DNS Server and Altermate DNS Server need to be configured.
84 +When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
20 20  
21 21  The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
22 22  
23 23  (% style="text-align:center" %)
24 -[[image:Ethernet vpn.jpg]]
89 +[[image:Ethernet.png||alt="Ethernet setting.png"]]
25 25  
26 26  === ** Configure Ethernet and WIFI networking** ===
27 27  
28 -At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud. 
93 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.  
29 29  
30 30  [[image:1688622050993-253.png]]
31 31  
32 32  === ** Configure Ethernet and 4G networking** ===
33 33  
34 -At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud. 
99 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
35 35  
36 36  (% style="text-align:center" %)
37 37  [[image:4G.png]]
38 38  
104 += **1 VPN **pass-through =
39 39  
40 -= **2 VPN **pass-through =
41 -
42 42  (% style="text-align:center" %)
43 43  [[image:VPN pass.png]]
44 44  
... ... @@ -71,11 +71,53 @@
71 71  * When the current account has a device being pass-through, the Start pass-through button cannot be clicked
72 72  * (((
73 73  After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
74 -)))
75 75  
76 76  {{info}}
77 77  ✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
78 78  {{/info}}
142 +)))
79 79  
144 +=== **Refresh** ===
80 80  
81 -
146 +Right-click in the blank area of the device list to pop up the global operation menu.
147 +
148 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
149 +
150 +=== **Status type** ===
151 +
152 +There are 5 status of device in the Wecon VPN pass-through tool.
153 +
154 +* Offline(Gray): Pass-through cannot be performed.
155 +* Online(Green): Pass-through can be performed.
156 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
157 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
158 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
159 +
160 += **3 Operating Steps** =
161 +
162 +Select device in the device list. You can select "DHCP" or "Static IP".
163 +
164 +* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
165 +* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
166 +
167 +(% style="text-align:center" %)
168 +[[image:static VPN.png||height="434" width="1186"]]
169 +
170 +
171 +**How to choose the pass-through IP of the PC.**
172 +
173 +For PLC and PC LANs using the different network segment.
174 +
175 +* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
176 +* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
177 +
178 +For PLC and PC LANs using the same network segment.
179 +
180 +* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
181 +* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
182 +
183 +{{info}}
184 +**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
185 +{{/info}}
186 +
187 += 4 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
Ethernet.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +35.9 KB
Content
static VPN.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +37.2 KB
Content
企业微信截图_16896591499557.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +22.9 KB
Content
动态IP.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
动态穿透.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +23.0 KB
Content
联网方式.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +20.5 KB
Content
静态IP.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +33.7 KB
Content
静态穿透.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +23.0 KB
Content