Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 52.1
edited by Theodore Xu
on 2023/07/18 17:24
Change comment: There is no comment for this version
To version 27.1
edited by Theodore Xu
on 2023/07/18 14:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -52,23 +52,9 @@
52 52  * Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
53 53  * Ending VPN pass-through(Blue): VPN pass-through is ending.
54 54  
55 -=== ===
56 -
57 -=== **How to choose the pass-through IP of the PC.** ===
58 -
59 -For PLC and PC LANs using the different network segment.
60 -
61 -* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
62 -* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
63 -
64 -For PLC and PC LANs using the same network segment.
65 -
66 -* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
67 -* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
68 -
69 69  = **2 **Two modes of Pass-through =
70 70  
71 -* **DHCP**: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
57 +* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
72 72  
73 73  (% style="text-align:center" %)
74 74  [[image:动态IP.png||alt="动态穿透.png"]]
... ... @@ -79,100 +79,122 @@
79 79  
80 80  * (((
81 81  (% class="wikigeneratedid" %)
82 -**Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
68 +Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
83 83  )))
84 84  
85 85  (% style="text-align:center" %)
86 86  [[image:静态IP.png||alt="静态穿透.png"]]
87 87  
88 -= **3 Three networking methods supported by VPN** =
74 += **5 The mode of Box connecting to the cloud** =
89 89  
90 90  (% style="text-align:center" %)
91 91  [[image:联网方式.png]]
92 92  
93 -=== **（1）Configure Ethernet networking：DHCP** ===
94 94  
95 95  (% style="text-align:center" %)
96 -[[image:动态联网.png]]
81 +[[image:Ethernet setting.png]]
97 97  
98 -(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
99 -This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
83 +=== ** Configure Ethernet networking** ===
100 100  
85 +When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
86 +
87 +The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
88 +
101 101  (% style="text-align:center" %)
102 -[[image:分配的动态IP.png]]
90 +[[image:Ethernet.png||alt="Ethernet setting.png"]]
103 103  
104 -(% class="wikigeneratedid" %)
105 -At that time using VPN Pass-through：
92 +=== ** Configure Ethernet and WIFI networking** ===
106 106  
107 -* (((
108 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
109 -)))
110 -* (((
111 -Static IP: please customize the generated IP address.
112 -)))
94 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.  
113 113  
114 -=== **（2）Configure Ethernet networking：Static IP** ===
96 +[[image:1688622050993-253.png]]
115 115  
98 +=== ** Configure Ethernet and 4G networking** ===
99 +
100 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
101 +
116 116  (% style="text-align:center" %)
117 -[[image:静态联网.png]]
103 +[[image:4G.png]]
118 118  
119 -{{info}}
120 -✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
121 -{{/info}}
105 += **1 VPN **pass-through =
122 122  
123 -(% class="wikigeneratedid" %)
124 -At that time using VPN Pass-through：
107 +(% style="text-align:center" %)
108 +[[image:VPN pass.png]]
125 125  
110 +**Functional overview**
111 +
112 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
113 +
114 +=== ** Device list** ===
115 +
116 +* Display all support VPN pass-through devices under current account
126 126  * (((
127 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
118 +Right-click menu, search box is consistent with PLC pass-through
128 128  )))
120 +
121 +=== ** Remote LAN IP** ===
122 +
123 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
124 +
125 +=== ** Device information** ===
126 +
127 +Display device machine code, name, device status and other information
128 +
129 +=== **Start pass-through/End pass-through** ===
130 +
131 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
132 +* Click End pass-through to end VPN pass-through
133 +* When the device is offline, the Start pass-through button cannot be clicked
134 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
135 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
136 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
129 129  * (((
130 -Static IP: please customize the generated IP address.
138 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
139 +
140 +{{info}}
141 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
142 +{{/info}}
131 131  )))
132 132  
133 -=== **（3）Configure WIFI networking** ===
145 +=== **Refresh** ===
134 134  
135 -When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
147 +Right-click in the blank area of the device list to pop up the global operation menu.
136 136  
137 -The following two connections are available：
149 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
138 138  
139 -（1）
151 +=== **Status type** ===
140 140  
153 +There are 5 status of device in the Wecon VPN pass-through tool.
141 141  
142 -(% style="text-align:center" %)
143 -[[image:wifi 不直连.png]]
155 +* Offline(Gray): Pass-through cannot be performed.
156 +* Online(Green): Pass-through can be performed.
157 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
158 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
159 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
144 144  
145 -（2）
161 += **3 Operating Steps** =
146 146  
147 -(% style="text-align:center" %)
148 -[[image:wifi 直连.png]]
163 +Select device in the device list. You can select "DHCP" or "Static IP".
149 149  
150 -(% class="wikigeneratedid" id="H" %)
151 -**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
165 +* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
166 +* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
152 152  
153 153  (% style="text-align:center" %)
154 -[[image:wifi.png]]
169 +[[image:static VPN.png||height="434" width="1186"]]
155 155  
156 -(% class="wikigeneratedid" %)
157 -At that time using VPN Pass-through：
158 158  
159 -* (((
160 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
161 -)))
162 -* (((
163 -Static IP: please customize the generated IP address：192.168.**50**.XXX
164 -)))
172 +**How to choose the pass-through IP of the PC.**
165 165  
166 -=== **Configure Ethernet and 4G networking** ===
174 +For PLC and PC LANs using the different network segment.
167 167  
168 -At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
176 +* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
177 +* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
169 169  
170 -(% style="text-align:center" %)
171 -[[image:4G.png]]
179 +For PLC and PC LANs using the same network segment.
172 172  
173 -= =
181 +* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
182 +* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
174 174  
175 -
176 176  {{info}}
177 177  **✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
178 178  {{/info}}
plc 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
wifi 不直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
wifi 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.1 KB
Content
wifi.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
分配的动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -29.0 KB
Content
动态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
静态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content