Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 55.1
edited by Theodore Xu
on 2023/07/18 17:25
Change comment: There is no comment for this version
To version 32.1
edited by Theodore Xu
on 2023/07/18 14:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -52,25 +52,9 @@
52 52  * Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
53 53  * Ending VPN pass-through(Blue): VPN pass-through is ending.
54 54  
55 -=== **How to choose the pass-through IP of the PC.** ===
56 -
57 -For PLC and PC LANs using the different network segment.
58 -
59 -* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
60 -* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
61 -
62 -For PLC and PC LANs using the same network segment.
63 -
64 -* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
65 -* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
66 -
67 -{{info}}
68 -**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
69 -{{/info}}
70 -
71 71  = **2 **Two modes of Pass-through =
72 72  
73 -* **DHCP**: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
57 +* **DCHP**: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
74 74  
75 75  (% style="text-align:center" %)
76 76  [[image:动态IP.png||alt="动态穿透.png"]]
... ... @@ -92,88 +92,114 @@
92 92  (% style="text-align:center" %)
93 93  [[image:联网方式.png]]
94 94  
95 -=== **（1）Configure Ethernet networking：DHCP** ===
79 +**~ Configure Ethernet networking**
96 96  
97 97  (% style="text-align:center" %)
98 -[[image:动态联网.png]]
82 +[[image:Ethernet setting.png]]
99 99  
100 -(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
101 -This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
84 +=== ===
102 102  
86 +When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
87 +
88 +The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
89 +
103 103  (% style="text-align:center" %)
104 -[[image:分配的动态IP.png]]
91 +[[image:Ethernet.png||alt="Ethernet setting.png"]]
105 105  
106 -(% class="wikigeneratedid" %)
107 -At that time using VPN Pass-through：
93 +=== ** Configure Ethernet and WIFI networking** ===
108 108  
109 -* (((
110 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
111 -)))
112 -* (((
113 -Static IP: please customize the generated IP address.
114 -)))
95 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.  
115 115  
116 -=== **（2）Configure Ethernet networking：Static IP** ===
97 +[[image:1688622050993-253.png]]
117 117  
99 +=== ** Configure Ethernet and 4G networking** ===
100 +
101 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
102 +
118 118  (% style="text-align:center" %)
119 -[[image:静态联网.png]]
104 +[[image:4G.png]]
120 120  
121 -{{info}}
122 -✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
123 -{{/info}}
106 += **1 VPN **pass-through =
124 124  
125 -(% class="wikigeneratedid" %)
126 -At that time using VPN Pass-through：
108 +(% style="text-align:center" %)
109 +[[image:VPN pass.png]]
127 127  
111 +**Functional overview**
112 +
113 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
114 +
115 +=== ** Device list** ===
116 +
117 +* Display all support VPN pass-through devices under current account
128 128  * (((
129 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
119 +Right-click menu, search box is consistent with PLC pass-through
130 130  )))
121 +
122 +=== ** Remote LAN IP** ===
123 +
124 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
125 +
126 +=== ** Device information** ===
127 +
128 +Display device machine code, name, device status and other information
129 +
130 +=== **Start pass-through/End pass-through** ===
131 +
132 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
133 +* Click End pass-through to end VPN pass-through
134 +* When the device is offline, the Start pass-through button cannot be clicked
135 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
136 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
137 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
131 131  * (((
132 -Static IP: please customize the generated IP address.
139 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
140 +
141 +{{info}}
142 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
143 +{{/info}}
133 133  )))
134 134  
135 -=== **（3）Configure WIFI networking** ===
146 +=== **Refresh** ===
136 136  
137 -When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
148 +Right-click in the blank area of the device list to pop up the global operation menu.
138 138  
139 -The following two connections are available：
150 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
140 140  
141 -（1）
152 +=== **Status type** ===
142 142  
154 +There are 5 status of device in the Wecon VPN pass-through tool.
143 143  
144 -(% style="text-align:center" %)
145 -[[image:wifi 不直连.png]]
156 +* Offline(Gray): Pass-through cannot be performed.
157 +* Online(Green): Pass-through can be performed.
158 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
159 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
160 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
146 146  
147 -（2）
162 += **3 Operating Steps** =
148 148  
149 -(% style="text-align:center" %)
150 -[[image:wifi 直连.png]]
164 +Select device in the device list. You can select "DHCP" or "Static IP".
151 151  
152 -(% class="wikigeneratedid" id="H" %)
153 -**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
166 +* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
167 +* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
154 154  
155 155  (% style="text-align:center" %)
156 -[[image:wifi.png]]
170 +[[image:static VPN.png||height="434" width="1186"]]
157 157  
158 -(% class="wikigeneratedid" %)
159 -At that time using VPN Pass-through：
160 160  
161 -* (((
162 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
163 -)))
164 -* (((
165 -Static IP: please customize the generated IP address：192.168.**50**.XXX
166 -)))
173 +**How to choose the pass-through IP of the PC.**
167 167  
168 -=== **Configure Ethernet and 4G networking** ===
175 +For PLC and PC LANs using the different network segment.
169 169  
170 -At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
177 +* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
178 +* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
171 171  
172 -(% style="text-align:center" %)
173 -[[image:4G.png]]
180 +For PLC and PC LANs using the same network segment.
174 174  
175 -= =
182 +* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
183 +* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
176 176  
177 -
185 +{{info}}
186 +**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
187 +{{/info}}
178 178  
179 179  = 4 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
plc 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
wifi 不直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
wifi 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.1 KB
Content
wifi.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
分配的动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -29.0 KB
Content
动态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
静态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content