Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 65.1
edited by Theodore Xu
on 2023/09/28 14:56
Change comment: There is no comment for this version
To version 3.1
edited by Theodore Xu
on 2023/07/06 14:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -6 VPN pass-through
1 +VPN passthrough
Content
... ... @@ -1,195 +1,81 @@
1 -== 1 VPN pass-through ==
1 += **1 Enable Ethernet** =
2 2  
3 -**Functional overview**：VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
3 +Wecon VPN pass-through currently supports the following three pass-through modes：
4 4  
5 -(% style="text-align:center" %)
6 -[[image:介绍.png]]
5 +* Ethernet (Networking)
6 +* WIFI (Networking) +Ethernet
7 +* 4G (Networking) +Ethernet
7 7  
8 -(% class="wikigeneratedid" id="HDevicelist" %)
9 -**~ Device list**
10 -
11 -* Display all support VPN pass-through devices under current account
12 -* (((
13 -Right-click menu, search box is consistent with PLC pass-through
14 -)))
15 -
16 -(% class="wikigeneratedid" id="HRemoteLANIP" %)
17 -**~ Remote LAN IP**
18 -
19 -VPN pass-through required parameters, DHCP/Static IP of pass-through IP
20 -
21 -(% class="wikigeneratedid" id="HDeviceinformation" %)
22 -**~ Device information**
23 -
24 -Display device machine code, name, device status and other information
25 -
26 -(% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
27 -**Start pass-through/End pass-through**
28 -
29 -* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
30 -* Click End pass-through to end VPN pass-through
31 -* When the device is offline, the Start pass-through button cannot be clicked
32 -* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
33 -* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
34 -* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
35 -* (((
36 -After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
37 -
38 38  {{info}}
39 -✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
10 +✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
40 40  {{/info}}
41 -)))
42 42  
43 -(% class="wikigeneratedid" id="HRefresh" %)
44 -**Refresh**
45 45  
46 -Right-click in the blank area of the device list to pop up the global operation menu.
14 +(% style="text-align:center" %)
15 +[[image:Ethernet setting.png]]
47 47  
48 -Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
17 +=== ** Configure Ethernet networking** ===
49 49  
50 -(% class="wikigeneratedid" id="HStatustype" %)
51 -**Status type**
19 +When using Ethernet for networking, Preferred DNS Server and Altermate DNS Server need to be configured.
52 52  
53 -There are 5 status of device in the Wecon VPN pass-through tool.
21 +The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
54 54  
55 -* Offline(Gray): Pass-through cannot be performed.
56 -* Online(Green): Pass-through can be performed.
57 -* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
58 -* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
59 -* Ending VPN pass-through(Blue): VPN pass-through is ending.
23 +(% style="text-align:center" %)
24 +[[image:Ethernet vpn.jpg]]
60 60  
61 -(% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
62 -**How to choose the pass-through IP of the PC.**
26 +=== ** Configure Ethernet and WIFI networking** ===
63 63  
64 -For PLC and PC LANs using the different network segment.
28 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud. 
65 65  
66 -* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
67 -* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
30 +[[image:1688622050993-253.png]]
68 68  
69 -For PLC and PC LANs using the same network segment.
32 +=== ** Configure Ethernet and 4G networking** ===
70 70  
71 -* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
72 -* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
34 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud. 
73 73  
74 -{{info}}
75 -**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
76 -{{/info}}
36 +(% style="text-align:center" %)
37 +[[image:4G.png]]
77 77  
78 -== **2 **Two modes of VPN ==
79 79  
80 -* **DHCP**: Enables the computer to randomly generate an Ethernet IP. **The generated IP segment is determined by the Ethernet configuration of the V-BOX！**
40 += **2 VPN **pass-through =
81 81  
82 -{{info}}
83 -✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！！！
84 -{{/info}}
85 -
86 86  (% style="text-align:center" %)
87 -[[image:动态IP.png||alt="动态穿透.png"]]
43 +[[image:VPN pass.png]]
88 88  
89 -**V-BOX network**
45 +**Functional overview**
90 90  
91 -If my box IP is 192.168.39.250, when using VPN penetration the randomly generated IP is:192.168.39.XX，
47 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
92 92  
93 -(% style="text-align:center" %)
94 -[[image:盒子网络.png]]
49 +=== ** Device list** ===
95 95  
51 +* Display all support VPN pass-through devices under current account
96 96  * (((
97 -(% class="wikigeneratedid" %)
98 -**Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
53 +Right-click menu, search box is consistent with PLC pass-through
99 99  )))
100 100  
101 -(% style="text-align:center" %)
102 -[[image:静态IP.png||alt="静态穿透.png"]]
56 +=== ** Remote LAN IP** ===
103 103  
104 -= **3 The networking methods supported by VPN** =
58 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
105 105  
106 -(% style="text-align:center" %)
107 -[[image:联网方式.png]]
60 +=== ** Device information** ===
108 108  
109 -=== **（1）Configure Ethernet networking：DHCP** ===
62 +Display device machine code, name, device status and other information
110 110  
111 -(% style="text-align:center" %)
112 -[[image:动态联网.png]]
64 +=== **Start pass-through/End pass-through** ===
113 113  
114 -(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
115 -This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
116 -
117 -(% style="text-align:center" %)
118 -[[image:分配的动态IP.png]]
119 -
120 -(% class="wikigeneratedid" %)
121 -At that time using VPN Pass-through：
122 -
66 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
67 +* Click End pass-through to end VPN pass-through
68 +* When the device is offline, the Start pass-through button cannot be clicked
69 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
70 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
71 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
123 123  * (((
124 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
73 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
125 125  )))
126 -* (((
127 -Static IP: please customize the generated IP address.
128 -)))
129 129  
130 -=== **（2）Configure Ethernet networking：Static IP** ===
131 -
132 -(% style="text-align:center" %)
133 -[[image:静态联网.png]]
134 -
135 135  {{info}}
136 -✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
77 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
137 137  {{/info}}
138 138  
139 -(% class="wikigeneratedid" %)
140 -At that time using VPN Pass-through：
141 141  
142 -* (((
143 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
144 -)))
145 -* (((
146 -Static IP: please customize the generated IP address.
147 -)))
148 -
149 -=== **（3）Configure WIFI networking** ===
150 -
151 -When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
152 -
153 -The following two connections are available：
154 -
155 -（1）
156 -
157 -
158 -(% style="text-align:center" %)
159 -[[image:wifi 不直连.png]]
160 -
161 -（2）
162 -
163 -(% style="text-align:center" %)
164 -[[image:wifi 直连.png]]
165 -
166 -(% class="wikigeneratedid" id="H" %)
167 -**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
168 -
169 -(% style="text-align:center" %)
170 -[[image:wifi.png]]
171 -
172 -(% class="wikigeneratedid" %)
173 -At that time using VPN Pass-through：
174 -
175 -* (((
176 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
177 -)))
178 -* (((
179 -Static IP: please customize the generated IP address：192.168.**50**.XXX
180 -)))
181 -
182 -=== **（4）Configure  4G networking** ===
183 -
184 -please refer to WIFI setting
185 -
186 -(% style="text-align:center" %)
187 -[[image:4G 联网.png]]
188 -
189 -
190 -= 4 Use the LAN port for communication =
191 -
192 -(% style="text-align:center" %)
193 -[[image:LAN 口.png]]
194 -
195 -= 5 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
81 +
4G 联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
Ethernet.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
LAN 口.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -42.9 KB
Content
plc 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
static VPN.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -37.2 KB
Content
wifi 不直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
wifi 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.1 KB
Content
wifi.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
介绍.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -32.3 KB
Content
企业微信截图_16896591499557.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.9 KB
Content
分配的动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -29.0 KB
Content
动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
动态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content
动态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
盒子网络.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content
联网方式.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
静态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.7 KB
Content
静态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content
静态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content