Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 70.1
edited by Theodore Xu
on 2023/09/28 15:03
Change comment: There is no comment for this version
To version 17.1
edited by Theodore Xu
on 2023/07/18 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,193 +1,141 @@
1 -== 1 VPN pass-through ==
1 += **1 **Two modes of Pass-through =
2 2  
3 -**Functional overview**：VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
3 +* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
4 4  
5 5  (% style="text-align:center" %)
6 -[[image:介绍.png]]
6 +[[image:动态IP.png||alt="动态穿透.png"]]
7 7  
8 -(% class="wikigeneratedid" id="HDevicelist" %)
9 -**~ Device list**
8 +{{info}}
9 +✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
10 +{{/info}}
10 10  
11 -* Display all support VPN pass-through devices under current account
12 12  * (((
13 -Right-click menu, search box is consistent with PLC pass-through
13 +(% class="wikigeneratedid" %)
14 +Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
14 14  )))
15 15  
16 -(% class="wikigeneratedid" id="HRemoteLANIP" %)
17 -**~ Remote LAN IP**
17 +(% style="text-align:center" %)
18 +[[image:静态IP.png||alt="静态穿透.png"]]
18 18  
19 -VPN pass-through required parameters, DHCP/Static IP of pass-through IP
20 += **2 The mode of Box connecting to the cloud** =
20 20  
21 -(% class="wikigeneratedid" id="HDeviceinformation" %)
22 -**~ Device information**
22 +Wecon VPN pass-through currently supports the following three pass-through modes：
23 23  
24 -Display device machine code, name, device status and other information
24 +* Ethernet (Networking)
25 +* WIFI (Networking) +Ethernet
26 +* 4G (Networking) +Ethernet
25 25  
26 -(% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
27 -**Start pass-through/End pass-through**
28 -
29 -* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
30 -* Click End pass-through to end VPN pass-through
31 -* When the device is offline, the Start pass-through button cannot be clicked
32 -* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
33 -* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
34 -* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
35 -* (((
36 -After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
37 -
38 38  {{info}}
39 -✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
29 +✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
40 40  {{/info}}
41 -)))
42 42  
43 -(% class="wikigeneratedid" id="HRefresh" %)
44 -**Refresh**
45 45  
46 -Right-click in the blank area of the device list to pop up the global operation menu.
33 +(% style="text-align:center" %)
34 +[[image:Ethernet setting.png]]
47 47  
48 -Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
36 +=== ** Configure Ethernet networking** ===
49 49  
50 -(% class="wikigeneratedid" id="HStatustype" %)
51 -**Status type**
38 +When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
52 52  
53 -There are 5 status of device in the Wecon VPN pass-through tool.
40 +The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
54 54  
55 -* Offline(Gray): Pass-through cannot be performed.
56 -* Online(Green): Pass-through can be performed.
57 -* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
58 -* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
59 -* Ending VPN pass-through(Blue): VPN pass-through is ending.
42 +(% style="text-align:center" %)
43 +[[image:Ethernet.png||alt="Ethernet setting.png"]]
60 60  
61 -(% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
62 -**How to choose the pass-through IP of the PC.**
45 +=== ** Configure Ethernet and WIFI networking** ===
63 63  
64 -For PLC and PC LANs using the different network segment.
47 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.  
65 65  
66 -* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
67 -* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
49 +[[image:1688622050993-253.png]]
68 68  
69 -For PLC and PC LANs using the same network segment.
51 +=== ** Configure Ethernet and 4G networking** ===
70 70  
71 -* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
72 -* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
53 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
73 73  
74 -{{info}}
75 -**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
76 -{{/info}}
77 -
78 -== 2 Two modes of VPN ==
79 -
80 -* **DHCP**: Enables the computer to randomly generate an Ethernet IP. **The generated IP segment is determined by the Ethernet configuration of the V-BOX！**
81 -
82 -{{info}}
83 -✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！！！
84 -{{/info}}
85 -
86 86  (% style="text-align:center" %)
87 -[[image:动态IP.png||alt="动态穿透.png"]]
56 +[[image:4G.png]]
88 88  
89 -* (((
90 -(% class="wikigeneratedid" %)
91 -**Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
92 -)))
58 += **2 VPN **pass-through =
93 93  
94 94  (% style="text-align:center" %)
95 -[[image:静态IP.png||alt="静态穿透.png"]]
61 +[[image:VPN pass.png]]
96 96  
97 -== 3 The networking methods supported by VPN ==
63 +**Functional overview**
98 98  
99 -(% style="text-align:center" %)
100 -[[image:联网方式.png]]
65 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
101 101  
102 -(% class="wikigeneratedid" id="HFF081FF09ConfigureEthernetnetworkingFF1ADHCP" %)
103 -**（1）Configure Ethernet networking：DHCP**
67 +=== ** Device list** ===
104 104  
105 -
106 -(% class="wikigeneratedid" %)
107 -At that time using VPN Pass-through：
108 -
69 +* Display all support VPN pass-through devices under current account
109 109  * (((
110 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
71 +Right-click menu, search box is consistent with PLC pass-through
111 111  )))
112 112  
113 -(% style="text-align:center" %)
114 -[[image:动态联网.png]]
74 +=== ** Remote LAN IP** ===
115 115  
116 -(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
117 -This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
76 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
118 118  
119 -(% style="text-align:center" %)
120 -[[image:分配的动态IP.png]]
78 +=== ** Device information** ===
121 121  
80 +Display device machine code, name, device status and other information
122 122  
123 -(((
124 -**（2）Configure Ethernet networking：Static IP**
125 -)))
82 +=== **Start pass-through/End pass-through** ===
126 126  
127 -(((
128 -Static IP: please customize the generated IP address.
129 -)))
84 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
85 +* Click End pass-through to end VPN pass-through
86 +* When the device is offline, the Start pass-through button cannot be clicked
87 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
88 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
89 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
90 +* (((
91 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
130 130  
131 -(% style="text-align:center" %)
132 -[[image:静态联网.png]]
133 -
134 134  {{info}}
135 -✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
94 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
136 136  {{/info}}
137 -
138 -(% class="wikigeneratedid" %)
139 -At that time using VPN Pass-through：
140 -
141 -* (((
142 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
143 143  )))
144 -* (((
145 -Static IP: please customize the generated IP address.
146 -)))
147 147  
148 -=== **（3）Configure WIFI networking** ===
98 +=== **Refresh** ===
149 149  
150 -When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
100 +Right-click in the blank area of the device list to pop up the global operation menu.
151 151  
152 -The following two connections are available：
102 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
153 153  
154 -（1）
104 +=== **Status type** ===
155 155  
106 +There are 5 status of device in the Wecon VPN pass-through tool.
156 156  
157 -(% style="text-align:center" %)
158 -[[image:wifi 不直连.png]]
108 +* Offline(Gray): Pass-through cannot be performed.
109 +* Online(Green): Pass-through can be performed.
110 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
111 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
112 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
159 159  
160 -（2）
114 += **3 Operating Steps** =
161 161  
162 -(% style="text-align:center" %)
163 -[[image:wifi 直连.png]]
116 +Select device in the device list. You can select "DHCP" or "Static IP".
164 164  
165 -(% class="wikigeneratedid" id="H" %)
166 -**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
118 +* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
119 +* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
167 167  
168 168  (% style="text-align:center" %)
169 -[[image:wifi.png]]
122 +[[image:static VPN.png||height="434" width="1186"]]
170 170  
171 -(% class="wikigeneratedid" %)
172 -At that time using VPN Pass-through：
173 173  
174 -* (((
175 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
176 -)))
177 -* (((
178 -Static IP: please customize the generated IP address：192.168.**50**.XXX
179 -)))
125 +**How to choose the pass-through IP of the PC.**
180 180  
181 -=== **（4）Configure  4G networking** ===
127 +For PLC and PC LANs using the different network segment.
182 182  
183 -please refer to WIFI setting
129 +* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
130 +* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
184 184  
185 -(% style="text-align:center" %)
186 -[[image:4G 联网.png]]
132 +For PLC and PC LANs using the same network segment.
187 187  
188 -= 4 Use the LAN port for communication =
134 +* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
135 +* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
189 189  
190 -(% style="text-align:center" %)
191 -[[image:LAN 口.png]]
137 +{{info}}
138 +**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
139 +{{/info}}
192 192  
193 -= 5 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
141 += 4 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
4G 联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
LAN 口.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -42.9 KB
Content
plc 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
wifi 不直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
wifi 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.1 KB
Content
wifi.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
介绍.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -32.3 KB
Content
分配的动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -29.0 KB
Content
动态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
盒子网络.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content
联网方式.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
静态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content