Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 88.2
edited by Joe
on 2024/11/29 11:24
Change comment: There is no comment for this version
To version 15.1
edited by Theodore Xu
on 2023/07/18 14:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -06 VPN pass-through
1 +6 VPN pass-through
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.AiXia
Content
... ... @@ -1,214 +1,141 @@
1 -== VPN pass-through ==
1 += **1 **Two modes of Pass-through =
2 2  
3 -**Functional overview**：VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
3 +* DCHP: Enables the computer to randomly generate an Ethernet IP. The generated IP segment is determined by the Ethernet configuration of the V-BOX.
4 4  
5 5  (% style="text-align:center" %)
6 -[[image:介绍.png]]
6 +[[image:动态穿透.png]]
7 7  
8 -(% class="wikigeneratedid" id="HDevicelist" %)
9 -**~ Device list**
8 +{{info}}
9 +✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！
10 +{{/info}}
10 10  
11 -* Display all support VPN pass-through devices under current account
12 12  * (((
13 -Right-click menu, search box is consistent with PLC pass-through
13 +(% class="wikigeneratedid" %)
14 +Static IP：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
14 14  )))
15 15  
16 -(% class="wikigeneratedid" id="HRemoteLANIP" %)
17 -**~ Remote LAN IP**
17 +(% style="text-align:center" %)
18 +[[image:静态穿透.png]]
18 18  
19 -VPN pass-through required parameters, DHCP/Static IP of pass-through IP
20 += **1 Enable Ethernet** =
20 20  
21 -(% class="wikigeneratedid" id="HDeviceinformation" %)
22 -**~ Device information**
22 +Wecon VPN pass-through currently supports the following three pass-through modes：
23 23  
24 -Display device machine code, name, device status and other information
24 +* Ethernet (Networking)
25 +* WIFI (Networking) +Ethernet
26 +* 4G (Networking) +Ethernet
25 25  
26 -(% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
27 -**Start pass-through/End pass-through**
28 -
29 -* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
30 -* Click End pass-through to end VPN pass-through
31 -* When the device is offline, the Start pass-through button cannot be clicked
32 -* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
33 -* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
34 -* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
35 -* (((
36 -After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
37 -
38 38  {{info}}
39 -✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
29 +✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
40 40  {{/info}}
41 -)))
42 42  
43 -(% class="wikigeneratedid" id="HRefresh" %)
44 -**Refresh**
45 45  
46 -Right-click in the blank area of the device list to pop up the global operation menu.
33 +(% style="text-align:center" %)
34 +[[image:Ethernet setting.png]]
47 47  
48 -Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
36 +=== ** Configure Ethernet networking** ===
49 49  
50 -(% class="wikigeneratedid" id="HStatustype" %)
51 -**Status type**
38 +When using Ethernet for connecting cloud, it need to configure the Preferred DNS Server and Altermate DNS Server. If you are using 4G/WIFI to connect to the cloud, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
52 52  
53 -There are 5 status of device in the Wecon VPN pass-through tool.
40 +The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
54 54  
55 -* Offline(Gray): Pass-through cannot be performed.
56 -* Online(Green): Pass-through can be performed.
57 -* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
58 -* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
59 -* Ending VPN pass-through(Blue): VPN pass-through is ending.
42 +(% style="text-align:center" %)
43 +[[image:Ethernet.png||alt="Ethernet setting.png"]]
60 60  
61 -(% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
62 -**How to choose the pass-through IP of the PC.**
45 +=== ** Configure Ethernet and WIFI networking** ===
63 63  
64 -For PLC and PC LANs using the different network segment.
47 +At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud.  
65 65  
66 -* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
67 -* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
49 +[[image:1688622050993-253.png]]
68 68  
69 -For PLC and PC LANs using the same network segment.
51 +=== ** Configure Ethernet and 4G networking** ===
70 70  
71 -* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
72 -* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
53 +At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud.  
73 73  
74 -{{info}}
75 -**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
76 -{{/info}}
77 -
78 -== Two modes of VPN ==
79 -
80 -* **DHCP**: Enables the computer to randomly generate an Ethernet IP. **The generated IP segment is determined by the Ethernet configuration of the V-BOX！**
81 -
82 -{{info}}
83 -✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！！！
84 -{{/info}}
85 -
86 86  (% style="text-align:center" %)
87 -[[image:动态IP.png||alt="动态穿透.png"]]
56 +[[image:4G.png]]
88 88  
89 -* (((
90 -(% class="wikigeneratedid" %)
91 -**Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
92 -)))
58 += **2 VPN **pass-through =
93 93  
94 94  (% style="text-align:center" %)
95 -[[image:静态IP.png||alt="静态穿透.png"]]
61 +[[image:VPN pass.png]]
96 96  
97 -== The networking methods supported by VPN ==
63 +**Functional overview**
98 98  
99 -|Connects to the cloud|Vpn mode
100 -|(% colspan="1" rowspan="2" %)Ethernet|(1) DHCP  
101 -|(2) Static  
102 -|(% colspan="1" rowspan="2" %)4G|(3) DHCP  
103 -|(4) Static  
104 -|(% colspan="1" rowspan="2" %)WIFI|(5) DHCP  
105 -|(6) Static  
65 +VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
106 106  
107 -=== **Cloud:Ethernet  VPN: DHCP** ===
67 +=== ** Device list** ===
108 108  
109 -(% class="wikigeneratedid" %)
110 -Configute network(DHCP)
69 +* Display all support VPN pass-through devices under current account
70 +* (((
71 +Right-click menu, search box is consistent with PLC pass-through
72 +)))
111 111  
112 -(% style="text-align:center" %)
113 -[[image:动态联网.png]]
74 +=== ** Remote LAN IP** ===
114 114  
115 -(% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
116 -This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
76 +VPN pass-through required parameters, DHCP/Static IP of pass-through IP
117 117  
118 -(% style="text-align:center" %)
119 -[[image:分配的动态IP.png]]
78 +=== ** Device information** ===
120 120  
121 -(% class="wikigeneratedid" %)
122 -Configute network(Static)
80 +Display device machine code, name, device status and other information
123 123  
124 -(% style="text-align:center" %)
125 -[[image:静态联网.png]]
82 +=== **Start pass-through/End pass-through** ===
126 126  
127 -(% class="wikigeneratedid" %)
128 -At that time using VPN Pass-through：
129 -
84 +* Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
85 +* Click End pass-through to end VPN pass-through
86 +* When the device is offline, the Start pass-through button cannot be clicked
87 +* When the firmware version of the device is too low, the Start pass-through button cannot be clicked
88 +* The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
89 +* When the current account has a device being pass-through, the Start pass-through button cannot be clicked
130 130  * (((
131 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
91 +After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
132 132  
133 -(% style="text-align:center" %)
134 -[[image:以太网动态穿透.png]]
135 -
136 -=== **Cloud: Ethernet  VPN: Static** ===
137 -
138 -(% class="wikigeneratedid" %)
139 -Static IP: please customize the generated IP address.
140 -)))
141 -
142 142  {{info}}
143 -✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
94 +✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
144 144  {{/info}}
145 -
146 -* (((
147 -(% style="text-align:center" %)
148 -[[image:以太网静态穿透.png]]
149 149  )))
150 150  
151 -=== **Cloud: WIFI  VPN: DHCP** ===
98 +=== **Refresh** ===
152 152  
153 -Configute network(DHCP)
100 +Right-click in the blank area of the device list to pop up the global operation menu.
154 154  
155 -(% style="text-align:center" %)
156 -[[image:WIF动态配置.png]]
102 +Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
157 157  
158 -Configute network(Static)
104 +=== **Status type** ===
159 159  
160 -(% style="text-align:center" %)
161 -[[image:WiFi静态配置.png]]
106 +There are 5 status of device in the Wecon VPN pass-through tool.
162 162  
163 -(% class="wikigeneratedid" id="H" %)
164 -**~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
108 +* Offline(Gray): Pass-through cannot be performed.
109 +* Online(Green): Pass-through can be performed.
110 +* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
111 +* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
112 +* Ending VPN pass-through(Blue): VPN pass-through is ending.
165 165  
166 -(% style="text-align:center" %)
167 -[[image:wifi.png]]
114 += **3 Operating Steps** =
168 168  
169 -(% class="wikigeneratedid" %)
170 -At that time using VPN Pass-through：
116 +Select device in the device list. You can select "DHCP" or "Static IP".
171 171  
172 -* (((
173 -VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
174 -)))
175 -* (((
176 -Static IP: please customize the generated IP address：192.168.50.XXX
177 -)))
118 +* If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.
119 +* If "Static IP" is selected, the user needs to fill in the pass-through IP of the PC manually, which will be used for pass-through.
178 178  
179 -=== **Cloud: WIFI  VPN: DHCP** ===
180 -
181 -please refer to WIFI setting
182 -
183 183  (% style="text-align:center" %)
184 -[[image:4G 联网.png]]
122 +[[image:static VPN.png||height="434" width="1186"]]
185 185  
186 -== Use the LAN port for communication ==
187 187  
188 -(% style="text-align:center" %)
189 -[[image:LAN 口.png]]
125 +**How to choose the pass-through IP of the PC.**
190 190  
191 -== [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] ==
127 +For PLC and PC LANs using the different network segment.
192 192  
129 +* The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
130 +* The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
193 193  
194 -== VPN port open test ==
132 +For PLC and PC LANs using the same network segment.
195 195  
196 -There will be two ports opened in outbound of the V-box network, 17195 and 17196. The following step will show how to verify if two ports are permitted.
134 +* The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
135 +* The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
197 197  
198 -(% class="box infomessage" %)
199 -(((
200 -Note: The following test must keep PC and V-box on the same LAN.
201 -)))
137 +{{info}}
138 +**✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
139 +{{/info}}
202 202  
203 -Select VPN server IP corresponding to V-Net server
204 -
205 -Asean: 159.138.233.229
206 -
207 -Europe:
208 -
209 -Press "Win + R" and input "cmd" to enter Administrator in pc.
210 -
211 -(% style="text-align:center" %)
212 -[[image:pWz2u4bPcu.png]]
213 -
214 -
141 += 4 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =
1695886670266-692.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
1695886681488-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
1695886802739-342.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
4G 联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
LAN 口.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -42.9 KB
Content
WIFI动态.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
WIF动态配置.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
WiFi静态配置.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -49.4 KB
Content
pWz2u4bPcu.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -9.9 KB
Content
plc 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
wifi 不直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
wifi 直连.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.1 KB
Content
wifi.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
介绍.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -32.3 KB
Content
以太网动态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
以太网静态穿透.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -28.0 KB
Content
分配的动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -29.0 KB
Content
动态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
动态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
盒子网络.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content
联网方式.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
静态IP.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -33.7 KB
Content
静态联网.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content