Skip to Content

Changes for page 06 VPN pass-through

Last modified by Joe on 2024/11/29 15:21
From version 9.1
edited by Theodore Xu
on 2023/07/06 16:51
Change comment: There is no comment for this version
To version 5.1
edited by Theodore Xu
on 2023/07/06 15:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -6 VPN pass-through
1 +VPN passthrough
Content
... ... @@ -37,7 +37,8 @@
37 37  [[image:4G.png]]
38 38  
39 39  
40 -= **2 VPN **pass-through =
40 +=
41 +**2 VPN **pass-through =
41 41  
42 42  (% style="text-align:center" %)
43 43  [[image:VPN pass.png]]
... ... @@ -75,26 +75,12 @@
75 75  {{info}}
76 76  ✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
77 77  {{/info}}
79 +
80 +=== ===
78 78  )))
79 79  
80 -=== **Refresh** ===
83 +=== **3 Operating Steps** ===
81 81  
82 -Right-click in the blank area of the device list to pop up the global operation menu.
83 -
84 -Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
85 -
86 -=== **Status type** ===
87 -
88 -There are 5 status of device in the Wecon VPN pass-through tool.
89 -
90 -* Offline(Gray): Pass-through cannot be performed.
91 -* Online(Green): Pass-through can be performed.
92 -* Being in VPN pass-through(Yellow): In the status of VPN pass-through.
93 -* Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
94 -* Ending VPN pass-through(Blue): VPN pass-through is ending.
95 -
96 -= **3 Operating Steps** =
97 -
98 98  Select device in the device list. You can select "DHCP" or "Static IP".
99 99  
100 100  * If you select "DHCP", during pass-through, the PC will negotiate with the V-BOX to obtain an available IP address of PC without user intervention.