Skip to Content

Wiki source code of VPN passthrough

Version 3.1 by Theodore Xu on 2023/07/06 14:04
Hide last authors
Theodore Xu 2.1 1 = **1 Enable Ethernet** =
Theodore Xu 1.1 2
Theodore Xu 3.1 3 Wecon VPN pass-through currently supports the following three pass-through modes：
Theodore Xu 2.1 4
5 * Ethernet (Networking)
6 * WIFI (Networking) +Ethernet
7 * 4G (Networking) +Ethernet
8
Theodore Xu 3.1 9 {{info}}
10 ✎Note: All of method require Ethernet to be enabled.  If the Ethernet IP is not configured, Can not be able to use the DHCP of the VPN.
11 {{/info}}
Theodore Xu 2.1 12
13
Theodore Xu 3.1 14 (% style="text-align:center" %)
15 [[image:Ethernet setting.png]]
Theodore Xu 2.1 16
Theodore Xu 3.1 17 === ** Configure Ethernet networking** ===
Theodore Xu 1.1 18
Theodore Xu 3.1 19 When using Ethernet for networking, Preferred DNS Server and Altermate DNS Server need to be configured.
20
21 The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through
22
23 (% style="text-align:center" %)
24 [[image:Ethernet vpn.jpg]]
25
26 === ** Configure Ethernet and WIFI networking** ===
27
28 At this time, Ethernet is used to connect with intranet and only used as a VPN passthrough. WIFI is used to connect to the cloud. 
29
30 [[image:1688622050993-253.png]]
31
32 === ** Configure Ethernet and 4G networking** ===
33
34 At this time, Ethernet is used to connect with intranet and only used as a VPN pass-through. 4G is used to connect to the cloud. 
35
36 (% style="text-align:center" %)
37 [[image:4G.png]]
38
39
40 = **2 VPN **pass-through =
41
42 (% style="text-align:center" %)
43 [[image:VPN pass.png]]
44
Theodore Xu 1.1 45 **Functional overview**
46
47 VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
48
Theodore Xu 3.1 49 === ** Device list** ===
Theodore Xu 1.1 50
51 * Display all support VPN pass-through devices under current account
52 * (((
53 Right-click menu, search box is consistent with PLC pass-through
54 )))
55
Theodore Xu 3.1 56 === ** Remote LAN IP** ===
Theodore Xu 1.1 57
58 VPN pass-through required parameters, DHCP/Static IP of pass-through IP
59
Theodore Xu 3.1 60 === ** Device information** ===
Theodore Xu 1.1 61
62 Display device machine code, name, device status and other information
63
Theodore Xu 3.1 64 === **Start pass-through/End pass-through** ===
Theodore Xu 1.1 65
66 * Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
67 * Click End pass-through to end VPN pass-through
68 * When the device is offline, the Start pass-through button cannot be clicked
69 * When the firmware version of the device is too low, the Start pass-through button cannot be clicked
70 * The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
71 * When the current account has a device being pass-through, the Start pass-through button cannot be clicked
72 * (((
73 After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
74 )))
75
Theodore Xu 3.1 76 {{info}}
Theodore Xu 1.1 77 ✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
Theodore Xu 3.1 78 {{/info}}
Theodore Xu 1.1 79
Theodore Xu 3.1 80
Theodore Xu 1.1 81