Wiki source code of 6 VPN pass-through

Version 65.1 by Theodore Xu on 2023/09/28 14:56

Show last authors
1 == 1 VPN pass-through ==
2
3 **Functional overview**:VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
4
5 (% style="text-align:center" %)
6 [[image:介绍.png]]
7
8 (% class="wikigeneratedid" id="HDevicelist" %)
9 **~ Device list**
10
11 * Display all support VPN pass-through devices under current account
12 * (((
13 Right-click menu, search box is consistent with PLC pass-through
14 )))
15
16 (% class="wikigeneratedid" id="HRemoteLANIP" %)
17 **~ Remote LAN IP**
18
19 VPN pass-through required parameters, DHCP/Static IP of pass-through IP
20
21 (% class="wikigeneratedid" id="HDeviceinformation" %)
22 **~ Device information**
23
24 Display device machine code, name, device status and other information
25
26 (% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
27 **Start pass-through/End pass-through**
28
29 * Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
30 * Click End pass-through to end VPN pass-through
31 * When the device is offline, the Start pass-through button cannot be clicked
32 * When the firmware version of the device is too low, the Start pass-through button cannot be clicked
33 * The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
34 * When the current account has a device being pass-through, the Start pass-through button cannot be clicked
35 * (((
36 After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
37
38 {{info}}
39 ✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
40 {{/info}}
41 )))
42
43 (% class="wikigeneratedid" id="HRefresh" %)
44 **Refresh**
45
46 Right-click in the blank area of the device list to pop up the global operation menu.
47
48 Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
49
50 (% class="wikigeneratedid" id="HStatustype" %)
51 **Status type**
52
53 There are 5 status of device in the Wecon VPN pass-through tool.
54
55 * Offline(Gray): Pass-through cannot be performed.
56 * Online(Green): Pass-through can be performed.
57 * Being in VPN pass-through(Yellow): In the status of VPN pass-through.
58 * Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
59 * Ending VPN pass-through(Blue): VPN pass-through is ending.
60
61 (% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
62 **How to choose the pass-through IP of the PC.**
63
64 For PLC and PC LANs using the different network segment.
65
66 * The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
67 * The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
68
69 For PLC and PC LANs using the same network segment.
70
71 * The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
72 * The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
73
74 {{info}}
75 **✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
76 {{/info}}
77
78 == **2 **Two modes of VPN ==
79
80 * **DHCP**: Enables the computer to randomly generate an Ethernet IP. **The generated IP segment is determined by the Ethernet configuration of the V-BOX!**
81
82 {{info}}
83 ✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used!!!
84 {{/info}}
85
86 (% style="text-align:center" %)
87 [[image:动态IP.png||alt="动态穿透.png"]]
88
89 **V-BOX network**
90
91 If my box IP is 192.168.39.250, when using VPN penetration the randomly generated IP is:192.168.39.XX,
92
93 (% style="text-align:center" %)
94 [[image:盒子网络.png]]
95
96 * (((
97 (% class="wikigeneratedid" %)
98 **Static IP**:Customize the generated IP address. static mode does not require setting up Ethernet configuration.
99 )))
100
101 (% style="text-align:center" %)
102 [[image:静态IP.png||alt="静态穿透.png"]]
103
104 = **3 The networking methods supported by VPN** =
105
106 (% style="text-align:center" %)
107 [[image:联网方式.png]]
108
109 === **(1)Configure Ethernet networking:DHCP** ===
110
111 (% style="text-align:center" %)
112 [[image:动态联网.png]]
113
114 (% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
115 This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
116
117 (% style="text-align:center" %)
118 [[image:分配的动态IP.png]]
119
120 (% class="wikigeneratedid" %)
121 At that time using VPN Pass-through:
122
123 * (((
124 VPN DCHP:After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
125 )))
126 * (((
127 Static IP: please customize the generated IP address.
128 )))
129
130 === **(2)Configure Ethernet networking:Static IP** ===
131
132 (% style="text-align:center" %)
133 [[image:静态联网.png]]
134
135 {{info}}
136 ✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
137 {{/info}}
138
139 (% class="wikigeneratedid" %)
140 At that time using VPN Pass-through:
141
142 * (((
143 VPN DCHP:After the Pass-through is complete a random IP will be generated for the **39** network segment, for example 192.168.**39**.XXX
144 )))
145 * (((
146 Static IP: please customize the generated IP address.
147 )))
148
149 === **(3)Configure WIFI networking** ===
150
151 When using WIFI to connect to the cloud, you need to configure a static IP to communicate with devices such as PLC.
152
153 The following two connections are available:
154
155 (1)
156
157
158 (% style="text-align:center" %)
159 [[image:wifi 不直连.png]]
160
161 (2)
162
163 (% style="text-align:center" %)
164 [[image:wifi 直连.png]]
165
166 (% class="wikigeneratedid" id="H" %)
167 **~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
168
169 (% style="text-align:center" %)
170 [[image:wifi.png]]
171
172 (% class="wikigeneratedid" %)
173 At that time using VPN Pass-through:
174
175 * (((
176 VPN DCHP:After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
177 )))
178 * (((
179 Static IP: please customize the generated IP address:192.168.**50**.XXX
180 )))
181
182 === **(4)Configure  4G networking** ===
183
184 please refer to WIFI setting
185
186 (% style="text-align:center" %)
187 [[image:4G 联网.png]]
188
189
190 = 4 Use the LAN port for communication =
191
192 (% style="text-align:center" %)
193 [[image:LAN 口.png]]
194
195 = 5 [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] =