Skip to Content

Wiki source code of 06 VPN pass-through

Version 91.1 by Joe on 2024/11/29 14:59
Show last authors
1 == VPN pass-through ==
2
3 **Functional overview**：VPN pass-through is to add PC to the Local Area Network where the device is located. It can be imagined that PC "replaces" the device at this time, and PC can access any PLC in this Local Area Network where the device is located.
4
5 (% style="text-align:center" %)
6 [[image:介绍.png]]
7
8 (% class="wikigeneratedid" id="HDevicelist" %)
9 **~ Device list**
10
11 * Display all support VPN pass-through devices under current account
12 * (((
13 Right-click menu, search box is consistent with PLC pass-through
14 )))
15
16 (% class="wikigeneratedid" id="HRemoteLANIP" %)
17 **~ Remote LAN IP**
18
19 VPN pass-through required parameters, DHCP/Static IP of pass-through IP
20
21 (% class="wikigeneratedid" id="HDeviceinformation" %)
22 **~ Device information**
23
24 Display device machine code, name, device status and other information
25
26 (% class="wikigeneratedid" id="HStartpass-through2FEndpass-through" %)
27 **Start pass-through/End pass-through**
28
29 * Click Start pass-through, proceed VPN pass-through according to the setting LAN pass-through IP
30 * Click End pass-through to end VPN pass-through
31 * When the device is offline, the Start pass-through button cannot be clicked
32 * When the firmware version of the device is too low, the Start pass-through button cannot be clicked
33 * The current account does not have the permission of pass-through to this device or the device is shared by others, the Start pass-through button cannot be clicked
34 * When the current account has a device being pass-through, the Start pass-through button cannot be clicked
35 * (((
36 After clicking the Start pass-through button, the pass-through is successful, the button changes to End pass-through, and the device status color on the left side changes to yellow
37
38 {{info}}
39 ✎Note: The WVPN connection only lasting for 2 hours after user connect successfully, suggest to close the connection manually after done the debugging.
40 {{/info}}
41 )))
42
43 (% class="wikigeneratedid" id="HRefresh" %)
44 **Refresh**
45
46 Right-click in the blank area of the device list to pop up the global operation menu.
47
48 Right-click menu to select "Refresh" or use shortcut key "F5" to refresh the status.
49
50 (% class="wikigeneratedid" id="HStatustype" %)
51 **Status type**
52
53 There are 5 status of device in the Wecon VPN pass-through tool.
54
55 * Offline(Gray): Pass-through cannot be performed.
56 * Online(Green): Pass-through can be performed.
57 * Being in VPN pass-through(Yellow): In the status of VPN pass-through.
58 * Reconnecting VPN pass-through(Red): Due to network or other reasons, VPN pass-through is reconnecting.
59 * Ending VPN pass-through(Blue): VPN pass-through is ending.
60
61 (% class="wikigeneratedid" id="HHowtochoosethepass-throughIPofthePC." %)
62 **How to choose the pass-through IP of the PC.**
63
64 For PLC and PC LANs using the different network segment.
65
66 * The PLC is directly connected to the V-BOX, and all IPs that are not used by the PLC can be used in the network segment where the PLC is located.
67 * The PLC and V-BOX are connected through a router or switch, and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used in the network segment where the PLC is located.
68
69 For PLC and PC LANs using the same network segment.
70
71 * The PLC is directly connected to the V-BOX and all free IPs not used by the PLC and other devices on the network where the PLC is located can be used within the network segment where the PLC is located.
72 * The PLC and V-BOX are connected through a router or switch, and all free IPs in the network segment where the PLC is located that are not used by the PLC, other devices on the network where the PLC is located, and other devices on the network where the PC is located can be used.
73
74 {{info}}
75 **✎Note:** If the selected IP address is occupied, the pass-through function will be failed.
76 {{/info}}
77
78 == Two modes of VPN ==
79
80 * **DHCP**: Enables the computer to randomly generate an Ethernet IP. **The generated IP segment is determined by the Ethernet configuration of the V-BOX！**
81
82 {{info}}
83 ✎Note: If the V-BOX is not configured with an Ethernet IP, dynamic mode of the VPN cannot be used！！！
84 {{/info}}
85
86 (% style="text-align:center" %)
87 [[image:动态IP.png||alt="动态穿透.png"]]
88
89 * (((
90 (% class="wikigeneratedid" %)
91 **Static IP**：Customize the generated IP address. static mode does not require setting up Ethernet configuration.
92 )))
93
94 (% style="text-align:center" %)
95 [[image:静态IP.png||alt="静态穿透.png"]]
96
97 == The networking methods supported by VPN ==
98
99 |Connects to the cloud|Vpn mode
100 |(% colspan="1" rowspan="2" %)Ethernet|(1) DHCP  
101 |(2) Static  
102 |(% colspan="1" rowspan="2" %)4G|(3) DHCP  
103 |(4) Static  
104 |(% colspan="1" rowspan="2" %)WIFI|(5) DHCP  
105 |(6) Static  
106
107 === **Cloud:Ethernet  VPN: DHCP** ===
108
109 (% class="wikigeneratedid" %)
110 Configute network(DHCP)
111
112 (% style="text-align:center" %)
113 [[image:动态联网.png]]
114
115 (% class="wikigeneratedid" id="HFF082FF09ConfigureEthernetnetworkingFF1AStaticA0IP" %)
116 This is the IP assigned to the Box by the Ethernet. The network segment of the Ethernet IP address, which determines the network segment after using the DHCP VPN pass-through.
117
118 (% style="text-align:center" %)
119 [[image:分配的动态IP.png]]
120
121 (% class="wikigeneratedid" %)
122 Configute network(Static)
123
124 (% style="text-align:center" %)
125 [[image:静态联网.png]]
126
127 (% class="wikigeneratedid" %)
128 At that time using VPN Pass-through：
129
130 * (((
131 VPN DCHP：After the Pass-through is complete a random IP will be generated for the 39 network segment, for example 192.168.39.XXX
132
133 (% style="text-align:center" %)
134 [[image:以太网动态穿透.png]]
135
136 === **Cloud: Ethernet  VPN: Static** ===
137
138 (% class="wikigeneratedid" %)
139 Static IP: please customize the generated IP address.
140 )))
141
142 {{info}}
143 ✎Note: When using a static IP to connect cloud, you need to set the configure the Preferred DNS Server and Altermate DNS Server. If you are using connecting by other methods, you do not need to configure the Preferred DNS Server and Altermate DNS Server.
144 {{/info}}
145
146 * (((
147 (% style="text-align:center" %)
148 [[image:以太网静态穿透.png]]
149 )))
150
151 === **Cloud: WIFI  VPN: DHCP** ===
152
153 Configute network(DHCP)
154
155 (% style="text-align:center" %)
156 [[image:WIF动态配置.png]]
157
158 Configute network(Static)
159
160 (% style="text-align:center" %)
161 [[image:WiFi静态配置.png]]
162
163 (% class="wikigeneratedid" id="H" %)
164 **~ **At this time, Ethernet is as the communication IP, WIFI is used to connect to the cloud.  
165
166 (% style="text-align:center" %)
167 [[image:wifi.png]]
168
169 (% class="wikigeneratedid" %)
170 At that time using VPN Pass-through：
171
172 * (((
173 VPN DCHP：After the Pass-through is complete a random IP will be generated for the **50** network segment, for example 192.168.**50**.XXX
174 )))
175 * (((
176 Static IP: please customize the generated IP address：192.168.50.XXX
177 )))
178
179 === **Cloud: WIFI  VPN: DHCP** ===
180
181 please refer to WIFI setting
182
183 (% style="text-align:center" %)
184 [[image:4G 联网.png]]
185
186 == Use the LAN port for communication ==
187
188 (% style="text-align:center" %)
189 [[image:LAN 口.png]]
190
191 == [[Problem and error checking>>https://docs.we-con.com.cn/bin/view/V-BOX/FAQ/VPN%20pass-through]] ==
192
193
194 == VPN port open test ==
195
196 There will be two ports opened in outbound of the V-box network, 17195 and 17196. The following step will show how to verify if two ports are permitted.
197
198 (% class="box infomessage" %)
199 (((
200 Note:
201
202 1.The following test must keep PC and V-box on the same LAN.
203
204 2.If the network of V-box is stable and it show "Failed to connect with server " in VPN through, please check the following step.
205 )))
206
207 === Enable Telnet Client Via Control Panel ===
208
209 Press "Win + R" and input "control" to enter Control Panel.
210
211 Programs→ Programs and Features→ "Turn Windows features on or off→ Enable Telnet Client→ OK → Wait for the installation to complete
212
213 (% style="text-align:center" %)
214 [[image:1732852208701-414.png]]
215
216
217 (% style="text-align:center" %)
218 [[image:YunMQJJDJk.png]]
219
220 (% style="text-align:center" %)
221 [[image:I4vbjIFU1y.png]]
222
223 (% style="text-align:center" %)
224 [[image:UQQq7y583D.png]]
225
226 (% style="text-align:center" %)
227 [[image:cQhAQl6qq1.png]]
228
229 === Select VPN server IP corresponding to V-Net server ===
230
231 Asean: 159.138.233.229
232
233 Europe:18.158.109.116
234
235 China: 114.115.203.209
236
237 Press "Win + R" and input "cmd" to enter Administrator.
238
239 (% style="text-align:center" %)
240 [[image:pWz2u4bPcu.png]]
241
242 Type "telnet IP port". For example, to test if Port 17195 is opened in the network in China VPN server. "telnet 114.115.203.209 17195" should be typed in the screen.
243
244 (% style="text-align:center" %)
245 [[image:qADCKoU5kk.png]]
246
247 Type "Enter" in keyboard and show the following screen, which means Port 17195 is opened.
248
249 (% style="text-align:center" %)
250 [[image:1732851254941-912.png]]
251
252