Skip to Content

Changes for page PLC Protocol

Last modified by Theodore Xu on 2023/09/16 13:51
From version 23.1
edited by Theodore Xu
on 2023/09/16 13:49
Change comment: Renamed back-links.
To version 28.1
edited by Theodore Xu
on 2023/09/16 13:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,76 +1,0 @@
1 -== **Haiwell** ==
2 -
3 -Support Series: Haiwell S Series, A Series, C Series, T Series, H Series.
4 -
5 -**V-Box Settings**
6 -
7 -|=**Item**|=**Settings**|=**Note**
8 -|Protocol|Haiwell PLC Series|
9 -|Connection|RS232|
10 -|Baud rate|19200|
11 -|Data bit|8|
12 -|Parity|None|
13 -|Stop bit|2|
14 -|PLC station No.|0|
15 -
16 -(% style="text-align:center" %)
17 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@海为 盒子串口配置.png]]
18 -
19 -**Address List**
20 -
21 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
22 -|(% colspan="1" rowspan="6" %)Bit|X|XDDDDD|0~~99999|Input
23 -|Y|YDDDDD|0~~99999|Output
24 -|M|MDDDDD|0~~99999|Internal Relay
25 -|T|TDDDDD|0~~99999|Timer
26 -|C|CDDDDD|0~~99999|Counter
27 -|SM|SMDDDDD|0~~99999|System Status Bit
28 -|(% colspan="1" rowspan="7" %)Word|AI|AIDDDDD|0~~99999|Analog Input
29 -|AQ|AQDDDDD|0~~99999|Analog Output
30 -|V|VDDDDD|0~~99999|Data Register
31 -|TCV|TCVDDDDD|0~~99999|Timer Current Value
32 -|CCV|CCVDDDDD|0~~99999|Counter Currnet Value
33 -|SV|SVDDDDD|0~~99999|System Register
34 -|CCVH|CCVHDD|48~~79|Special Module Parameter
35 -
36 -**PLC Settings**
37 -
38 -Create new project, and select the specific model according to the actual PLC.
39 -
40 -(% style="text-align:center" %)
41 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHcreatenew.png]]
42 -
43 -Naming the program block, and set program password if project required, otherwise put Password as empty, then click OK to finish.
44 -
45 -(% style="text-align:center" %)
46 -[[image:HHnaming.png]]
47 -
48 -Using the RS232-USB converter cable to online the PLC connection.
49 -
50 -(% style="text-align:center" %)
51 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHPLConline.png]]
52 -
53 -If HaiwellHappy found the PLC successfully, it would add the device into the list, and click Online.
54 -
55 -(% style="text-align:center" %)
56 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHfoundPLC.png]]
57 -
58 -Set the project communication parameter if needed after online PLC.
59 -
60 -(% style="text-align:center" %)
61 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHsetCOMM.png]]
62 -
63 -Process the PLC download.
64 -
65 -(% style="text-align:center" %)
66 -[[image:HHDownloadPLC2.png]]
67 -
68 -Wait for PLC download complete, then it would prompt like below.
69 -
70 -(% style="text-align:center" %)
71 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHdownloadcomplete.png]]
72 -
73 -**Cable Wiring**
74 -
75 -(% style="text-align:center" %)
76 -[[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@Haiwell PLC Series.gif]]