Wiki source code of PLC Protocol
Version 27.1 by Theodore Xu on 2023/09/16 13:51
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | == **Haiwell** == | ||
| 2 | |||
| 3 | Support Series: Haiwell S Series, A Series, C Series, T Series, H Series. | ||
| 4 | |||
| 5 | **V-Box Settings** | ||
| 6 | |||
| 7 | |=**Item**|=**Settings**|=**Note** | ||
| 8 | |Protocol|Haiwell PLC Series| | ||
| 9 | |Connection|RS232| | ||
| 10 | |Baud rate|19200| | ||
| 11 | |Data bit|8| | ||
| 12 | |Parity|None| | ||
| 13 | |Stop bit|2| | ||
| 14 | |PLC station No.|0| | ||
| 15 | |||
| 16 | (% style="text-align:center" %) | ||
| 17 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@海为 盒子串口配置.png]] | ||
| 18 | |||
| 19 | **Address List** | ||
| 20 | |||
| 21 | |=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note** | ||
| 22 | |(% colspan="1" rowspan="6" %)Bit|X|XDDDDD|0~~99999|Input | ||
| 23 | |Y|YDDDDD|0~~99999|Output | ||
| 24 | |M|MDDDDD|0~~99999|Internal Relay | ||
| 25 | |T|TDDDDD|0~~99999|Timer | ||
| 26 | |C|CDDDDD|0~~99999|Counter | ||
| 27 | |SM|SMDDDDD|0~~99999|System Status Bit | ||
| 28 | |(% colspan="1" rowspan="7" %)Word|AI|AIDDDDD|0~~99999|Analog Input | ||
| 29 | |AQ|AQDDDDD|0~~99999|Analog Output | ||
| 30 | |V|VDDDDD|0~~99999|Data Register | ||
| 31 | |TCV|TCVDDDDD|0~~99999|Timer Current Value | ||
| 32 | |CCV|CCVDDDDD|0~~99999|Counter Currnet Value | ||
| 33 | |SV|SVDDDDD|0~~99999|System Register | ||
| 34 | |CCVH|CCVHDD|48~~79|Special Module Parameter | ||
| 35 | |||
| 36 | **PLC Settings** | ||
| 37 | |||
| 38 | Create new project, and select the specific model according to the actual PLC. | ||
| 39 | |||
| 40 | (% style="text-align:center" %) | ||
| 41 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHcreatenew.png]] | ||
| 42 | |||
| 43 | Naming the program block, and set program password if project required, otherwise put Password as empty, then click OK to finish. | ||
| 44 | |||
| 45 | (% style="text-align:center" %) | ||
| 46 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHnaming.png]] | ||
| 47 | |||
| 48 | Using the RS232-USB converter cable to online the PLC connection. | ||
| 49 | |||
| 50 | (% style="text-align:center" %) | ||
| 51 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHPLConline.png]] | ||
| 52 | |||
| 53 | If HaiwellHappy found the PLC successfully, it would add the device into the list, and click Online. | ||
| 54 | |||
| 55 | (% style="text-align:center" %) | ||
| 56 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHfoundPLC.png]] | ||
| 57 | |||
| 58 | Set the project communication parameter if needed after online PLC. | ||
| 59 | |||
| 60 | (% style="text-align:center" %) | ||
| 61 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHsetCOMM.png]] | ||
| 62 | |||
| 63 | Process the PLC download. | ||
| 64 | |||
| 65 | (% style="text-align:center" %) | ||
| 66 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHDownloadPLC2.png]] | ||
| 67 | |||
| 68 | Wait for PLC download complete, then it would prompt like below. | ||
| 69 | |||
| 70 | (% style="text-align:center" %) | ||
| 71 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@HHdownloadcomplete.png]] | ||
| 72 | |||
| 73 | **Cable Wiring** | ||
| 74 | |||
| 75 | (% style="text-align:center" %) | ||
| 76 | [[image:V-BOX.V-Net.Protocols.Haiwell.WebHome@Haiwell PLC Series.gif]] |