Changes for page Crouzet PLC

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,0 +1,1 @@
	1	+Crouzet PLC

Content

...	...	@@ -1,0 +1,50 @@
	1	+= {{id name="HCrouzetPLC"/}}**Crouzet PLC** =
	2	+
	3	+== {{id name="HCROUZETM328FBD29Serial"/}}**CROUZET M3 (FBD) Serial** ==
	4	+
	5	+Support Series: Crouzet Millenium 3 CD12/CB12
	6	+
	7	+**1）V-BOX setting**
	8	+
	9	+|=Item|=Recommended |=Note
	10	+|=Protocol|CROUZET M3 (FBD)|
	11	+|=Connection|RS232|
	12	+|=Baud rate|115200|
	13	+|=Stop bits|1|
	14	+|=Data bits|7|
	15	+|=Parity|EVEN|
	16	+
	17	+**2）Address List**
	18	+
	19	+|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
	20	+|(% rowspan="4" %)Bit|I|I DD|1~~99|Input
	21	+|SLIBit|SLIBit DD.dd|1.0~~24.15|Serial Link Input
	22	+|SLOBit|SLOBit DD.dd|25.0~~48.15|Serial Link Output(Read only)
	23	+|State|State D|1~~1|PLC state(Read only)
	24	+|(% rowspan="5" %)Word|AI|AI DD|1~~99|Analog Input
	25	+|SLIn|SLIn DD|1~~24|Serial Link Input
	26	+|SLOut|SLOut DD|25~~48|Serial Link Output(Read only)
	27	+|Time|Time D|1~~6|(((
	28	+Time1: Second
	29	+
	30	+Time2: Minute
	31	+
	32	+Time3: Hour
	33	+
	34	+Time4: Day
	35	+
	36	+Time5: Month
	37	+
	38	+Time6: Year
	39	+)))
	40	+|Order|Order D|1~~1|(((
	41	+Running command(Write only)
	42	+
	43	+~=2: Run mode; =1: Stop mode;
	44	+)))
	45	+
	46	+**3）Cable Wiring**
	47	+
	48	+{{id name="ICrouzetRS232VBox.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_17c95c427d52c6e.png||alt="CrouzetRS232 VBox.png" height="247" width="400"]]
	49	+
	50	+**✎Note: **As the wiring diagram indicated, this protocol requires the DB9 serial port pin 4. But pin 4 is undefined for all V-Box, so it need the user to solder a Pull-up resistor to make the pin 4 working. As for how to solder the resistor on the motherboard, please contact with Wecon technical support for the details.