LS
XBC serial
1)V-BOX Settings
Item | Settings | Note |
Protocol | LS XBC CNet | |
Connection | RS232 | |
Baud rate | 115200 | |
Data bit | 8 | |
Parity | NONE | |
Stop bit | 1 | |
PLC station No. | 1 |
2)Address List
Type | Device registers | HMI registers | Format | Range | Note |
Bit | P | P | P d | 0~2047 | |
Bit | M | M | M d | 0~2047 | |
Bit | L | L | L d | 0~11263 | |
Bit | K | K | K d | 0~16183 | |
Bit | F | F | F d | 0~2047 | |
Bit | D | D | D d | 0~32767 | |
Bit | R | R | R d | 0~32767 | |
Bit | U | U | U d | 0~4095 | |
Word | P | P | P d | 0~2047 | |
Word | M | M | M d | 0~2047 | |
Word | L | L | L d | 0~11263 | |
Word | K | K | K d | 0~16183 | |
Word | F | F | F d | 0~2047 | |
Word | C | C | C d | 0~2047 | |
Word | T | T | T d | 0~2047 | |
Word | D | D | D d | 0~32767 | |
Word | N | N | N d | 0~21503 | |
Word | R | R | R d | 0~32767 | |
Word | U | U | U d | 0~4095 | |
Word | Z | Z | Z d | 0~127 | |
Word | S | S | S d | 0~127 |
3)Configure the communication protocol
4)Cable Wiring
Figure
Pin Definition Diagram
XGK FEnet Ethernet
Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
1)V-BOX Settings
Items | Settings | Note |
Protocol | LG XGK FEnet(Ethernet) | |
Connection | Ethernet | |
Port No. | 2004 |
2)Address List
Type | Register | Range | Format | Note |
Word | P | 0~2047 | P d | |
M | 0~2047 | M d | ||
K | 0~2047 | K d | ||
F | 0~2047 | F d | ||
T | 0~2047 | T d | ||
C | 0~2047 | C d | ||
Z | 0~127 | Z d | ||
S | 0~127 | S d | ||
L | 0~11263 | L d | ||
N | 0~21503 | N d | ||
D | 0~32767 | D d | ||
R | 0~32767 | R d | ||
ZR | 0~65535 | ZR d | ||
UxDD | 0~6331 | UxDD nndd | nn: 0~63, dd: 0~31 |
✎Note:
- In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
- The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
- All bit registers are in the form of bits in word, and the range is the same as the word register;
3)Communication Settings
4)Cable Wiring