Skip to Content

Changes for page Mitsubishi

Last modified by Joe on 2024/05/21 10:53
From version 41.1
edited by Theodore Xu
on 2023/09/15 09:42
Change comment: There is no comment for this version
To version 75.2
edited by Theodore Xu
on 2023/09/15 18:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,11 +1,11 @@
1 -== **FX1S,1N,2N Serial ** ==
1 +== **FX3U,3G,3GA Serial ** ==
2 2  
3 -Supported Series: Mitsubishi FX1S, FX1N, FX2N series
3 +Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
4 4  
5 5  **V-BOX Settings**
6 6  
7 7  |**Item**|**Settings**|**Note**
8 -|Protocol|Mitsubishi FX1S/FX1N/FX2N|
8 +|Protocol|Mitsubishi FX3U/3G/3GA|
9 9  |Connection|RS422/RS485/RS232|
10 10  |Baud rate|9600~~115200|
11 11  |Data bit|7/8|
... ... @@ -13,83 +13,102 @@
13 13  |Stop bit|1/2|
14 14  |PLC station No.|1~~255|
15 15  
16 +(% style="text-align:center" %)
17 +[[image:三菱 FX3U 串口协议配置.png]]
18 +
16 16  **Address List**
17 17  
18 -|**Type**|**Device registers**|**V-Box registers**|**Format**|**Range**|**Note**
19 -|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
20 -|Y|Y|Y o|0~~303237|
21 -|M|M|M d|0~~99999|
22 -|T|T|T d|0~~99999|
23 -|C|C|C d|0~~99999|
24 -|S|S|S d|0~~99999|
25 -|SM|SM|SM d|8000~~9999|
26 -|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
27 -|Y|Y|Y o|0~~303237|
28 -|M|M|M d|0~~99999|
29 -|T|T|T d|0~~99999|
30 -|C|C|C d|0~~199|
31 -|D|D|D d|0~~7999|
32 -|S|S|S d|0~~99999|
33 -|SD|SD|SD d|8000~~9999|
21 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
22 +|(% rowspan="7" %)Bit|X|Xo|0~~303237|
23 +|Y|Y o|0~~303237|
24 +|M|M d|0~~99999|
25 +|T|T d|0~~99999|
26 +|C|C d|0~~99999|
27 +|S|S d|0~~99999|
28 +|SM|SM d|8000~~9999|
29 +|(% rowspan="8" %)Word|X|Xo|0~~303237|
30 +|Y|Y o|0~~303237|
31 +|M|M d|0~~99999|
32 +|T|T d|0~~99999|
33 +|C|C d|0~~199|
34 +|D|D d|0~~7999|
35 +|S|S d|0~~99999|
36 +|SD|SD d|8000~~9999|
34 34  
35 -**Configure the communication protocol**
38 +**PLC Setting**
36 36  
37 -{{id name="Iimage-20220825102844-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dc262f14b14cf564.png||alt="image-20220825102844-3.png" height="1011" width="1920"]]
40 +Open GX Works2, create a new PLC project or open the project that has been created.
41 +Create new project： [Project]→[New]→[Series] FXCPU→[Type] FX3G/FX3GC→[OK].
38 38  
39 -**Cable Wiring**
43 +(% style="text-align:center" %)
44 +[[image:1.2.png]]
40 40  
41 -**RS422**
46 +PLC Default Parameters:
47 +[Connection type]RS422;[Baud rate]9600, [Data bit]7, [Stop bit]1,[Parity]EVEN; [Station number]0
48 +Note:The serial port parameters should be set depending on field requirements
42 42  
43 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9294a40c62eb99be.png||alt="image-20220825103350-4.png" height="284" width="723"]]
50 +PC and PLC connection:
44 44  
45 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
52 +[All connection]→[Connection 1]→[Transfer Setup Connection1]→[Serial USB]→RS-232C: PC and PLC are connected by USB to RS232 adapter,choose corresponding [COM Port]COM 5 →[Transmission speed]9.6Kbps→[setup] →[Parity]EVEN→[Data bits]7→[Stop bits]1→[OK]
46 46  
47 -== **FX3U,3G,3GA Serial ** ==
54 +(% style="text-align:center" %)
55 +[[image:1.5.1.png]]
48 48  
49 -Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
57 +Connection test:when connection is OK,the GX Works2 prompts “Successfully connected with the FX3G/FX3GCCPU.”
50 50  
51 -**V-BOX Settings**
59 +(% style="text-align:center" %)
60 +[[image:1.5.2.png]]
52 52  
53 -|**Item**|**Settings**|**Note**
54 -|Protocol|Mitsubishi FX3U/3G/3GA|
55 -|Connection|RS422/RS485/RS232|
56 -|Baud rate|9600~~115200|
57 -|Data bit|7/8|
58 -|Parity|EVEN/Odd/None|
59 -|Stop bit|1/2|
60 -|PLC station No.|1~~255|
62 +**Cable Wiring**
61 61  
62 -**Address List**
64 +**RS422**
63 63  
64 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
65 -|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
66 -|Y|Y|Y o|0~~303237|
67 -|M|M|M d|0~~99999|
68 -|T|T|T d|0~~99999|
69 -|C|C|C d|0~~99999|
70 -|S|S|S d|0~~99999|
71 -|SM|SM|SM d|8000~~9999|
72 -|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
73 -|Y|Y|Y o|0~~303237|
74 -|M|M|M d|0~~99999|
75 -|T|T|T d|0~~99999|
76 -|C|C|C d|0~~199|
77 -|D|D|D d|0~~7999|
78 -|S|S|S d|0~~99999|
79 -|SD|SD|SD d|8000~~9999|
66 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e904556bb758dfe.png||alt="image-20220825103421-5.png" height="296" width="715"]]
80 80  
81 -**Configure the communication protocol**
68 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
82 82  
83 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_4d2a4921240d23c6.png||alt="image-20220825102649-2.png" height="1009" width="1920"]]
70 +== **FX NOPROTOCOL** ==
84 84  
85 -**4）Cable Wiring**
72 +Mitsubishi FX3G-RS232-BD
86 86  
87 -**RS422**
74 +**V-Box Settings**
88 88  
89 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e904556bb758dfe.png||alt="image-20220825103421-5.png" height="296" width="715"]]
76 +|=**Item**|=**Settings**|=**Note**
77 +|Protocol|Mitsubishi FX NOPROTOCOL|
78 +|Connection|RS232|
79 +|Baud rate|9600|
80 +|Data bit|7|
81 +|Parity|EVEN|
82 +|Stop bit|1|
83 +|PLC station No.|0|
90 90  
91 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
85 +(% style="text-align:center" %)
86 +[[image:三菱 FN盒子通讯配置.png]]
92 92  
88 +**Address List**
89 +
90 +|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
91 +|(% rowspan="8" %)Bit|X|X o|0~~303237|
92 +|Y|Y o|0~~303237|
93 +|M|M d|0~~99999|
94 +|T|T d|0~~99999|
95 +|C|C d|0~~99999|
96 +|S|S d|0~~99999|
97 +|SM|SM d|8000~~9999|
98 +|Lamp|Lamp d|0~~0|
99 +|(% rowspan="8" %)Word|X|X o|0~~303237|
100 +|Y|Y o|0~~303237|
101 +|M|M d|0~~99999|
102 +|T|T d|0~~99999|
103 +|C|C d|0~~199|
104 +|D|D d|0~~7999|
105 +|S|S d|0~~99999|
106 +|SD|SD d|8000~~9999|
107 +
108 +**Cable Wiring**
109 +
110 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1717efe8d969a43c.png]]
111 +
93 93  == **FX3U Ethernet ** ==
94 94  
95 95  Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
... ... @@ -102,21 +102,24 @@
102 102  |Port No.|5009|Must be the same as the PLC setting
103 103  |PLC station No.|0|
104 104  
124 +(% style="text-align:center" %)
125 +[[image:三菱 FX3U 以太网协议配置.png]]
126 +
105 105  **Address List**
106 106  
107 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
108 -|(% rowspan="7" %)Bit|X|X|X OOO|0~~377|
109 -|Y|Y|Y OOO|0~~377|
110 -|M|M|M DDDD|0~~7679|
111 -|SM|SM|SM DDDD|8000~~8511|
112 -|S|S|S DDDD|0~~4095|
113 -|TS|TS|TS DDD|0~~511|
114 -|CS|CS|CS DDD|0~~255|
115 -|(% rowspan="5" %)Word|CN|CN|CN DDD|0~~199|
116 -|TN|TN|TN DDD|0~~511|
117 -|D|D|D DDDD|0~~7999|
118 -|SD|SD|SD DDDD|8000~~8511|
119 -|R|R|R DDDDD|0~~32767|
129 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
130 +|(% rowspan="7" %)Bit|X|X OOO|0~~377|
131 +|Y|Y OOO|0~~377|
132 +|M|M DDDD|0~~7679|
133 +|SM|SM DDDD|8000~~8511|
134 +|S|S DDDD|0~~4095|
135 +|TS|TS DDD|0~~511|
136 +|CS|CS DDD|0~~255|
137 +|(% rowspan="5" %)Word|CN|CN DDD|0~~199|
138 +|TN|TN DDD|0~~511|
139 +|D|D DDDD|0~~7999|
140 +|SD|SD DDDD|8000~~8511|
141 +|R|R DDDDD|0~~32767|
120 120  
121 121  **Ethernet Module Settings**
122 122  
... ... @@ -181,15 +181,11 @@
181 181  
182 182  [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7f29923ebcb670d1.png||alt="image-20221116111727-5.png" height="416" width="697"]]
183 183  
184 -**Configure the communication protocol**
206 +== **FX5U Serial ** ==
185 185  
186 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b2cdc33b6eb92b67.png||alt="image-20221119101946-2.png" height="395" width="695"]]
187 -
188 -== {{id name="HFX5USerial"/}}**FX5U Serial ** ==
189 -
190 190  Mitsubishi FX5U series PLC
191 191  
192 -**1）V-BOX Settings**
210 +**V-BOX Settings**
193 193  
194 194  |**Item**|**Settings**|**Note**
195 195  |Protocol|Mitsubishi FX5U|
... ... @@ -200,68 +200,67 @@
200 200  |Stop bit|1|
201 201  |PLC station No.|1~~255|Need to be the same as PLC settings
202 202  
203 -**2）Address List**
221 +(% style="text-align:center" %)
222 +[[image:三菱 FX5U 串口协议配置.png]]
204 204  
205 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
206 -|(% rowspan="15" %)Bit|X|X|X o|0~~303237|
207 -|Y|Y|Y o|0~~303237|
208 -|M|M|M d|0~~99999|
209 -|B|B|B h|0~~7FFF|
210 -|F|F|F d|0~~32767|
211 -|SB|SB|SB h|0~~7FFF|
212 -|TS|TS|TS d|0~~1023|
213 -|TC|TC|TC d|0~~1023|
214 -|STS|STS|STS d|0~~1023|
215 -|STC|STC|STS d|0~~1023|
216 -|CS|CS|CS d|0~~1023|
217 -|CC|CC|CC d|0~~1023|
218 -|SM|SM|SM d|0~~9999|
219 -|L|L|L d|0~~32767|
220 -|S|S|S d|0~~4095|
221 -|(% rowspan="9" %)Word|W|W|W h|0~~3FF|
222 -|TN|TN|TN d|0~~1023|
223 -|STN|STN|STN d|0~~1023|
224 -|CN|CN|CN d|0~~1023|
225 -|R|R|R d|0~~32767|
226 -|SW|SW|SW h|0~~7FFF|
227 -|Z|Z|Z d|0~~23|
228 -|D|D|D d|0~~7999|
229 -|SD|SD|SD d|0~~11999|
224 +**Address List**
230 230  
231 -**3）PLC Settings (GX Works 3)**
226 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
227 +|(% rowspan="15" %)Bit|X|X o|0~~303237|
228 +|Y|Y o|0~~303237|
229 +|M|M d|0~~99999|
230 +|B|B h|0~~7FFF|
231 +|F|F d|0~~32767|
232 +|SB|SB h|0~~7FFF|
233 +|TS|TS d|0~~1023|
234 +|TC|TC d|0~~1023|
235 +|STS|STS d|0~~1023|
236 +|STC|STS d|0~~1023|
237 +|CS|CS d|0~~1023|
238 +|CC|CC d|0~~1023|
239 +|SM|SM d|0~~9999|
240 +|L|L d|0~~32767|
241 +|S|S d|0~~4095|
242 +|(% rowspan="9" %)Word|W|W h|0~~3FF|
243 +|TN|TN d|0~~1023|
244 +|STN|STN d|0~~1023|
245 +|CN|CN d|0~~1023|
246 +|R|R d|0~~32767|
247 +|SW|SW h|0~~7FFF|
248 +|Z|Z d|0~~23|
249 +|D|D d|0~~7999|
250 +|SD|SD d|0~~11999|
232 232  
252 +**PLC Settings (GX Works 3)**
253 +
233 233  Create a blank FX5U project
234 234  
235 235  Find the 485 serial port module in the system navigation bar and double click to enter the settings.
236 236  
237 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5c9cb13fac1e6c93.png3Fwidth3D20026height3D46226rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5c9cb13fac1e6c93.png?width=200&height=462&rev=1.1||alt="12.PLC Protocol_html_5c9cb13fac1e6c93.png" height="462" width="200"]]
258 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5c9cb13fac1e6c93.png?width=200&height=462&rev=1.1||alt="12.PLC Protocol_html_5c9cb13fac1e6c93.png" height="462" width="200"]]
238 238  
239 239  Select protocol in the setting item, and set parameters.
240 240  
241 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_de942589ca070228.png3Fwidth3D60026height3D32426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_de942589ca070228.png?width=600&height=324&rev=1.1||alt="12.PLC Protocol_html_de942589ca070228.png" height="324" width="600"]]
262 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_de942589ca070228.png?width=600&height=324&rev=1.1||alt="12.PLC Protocol_html_de942589ca070228.png" height="324" width="600"]]
242 242  
243 243  Set station number, and [Message Pattern] (Pattern 1 or Pattern 4)
244 244  
245 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_387ec7d00b5feb59.png3Fwidth3D60026height3D32326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_387ec7d00b5feb59.png?width=600&height=323&rev=1.1||alt="12.PLC Protocol_html_387ec7d00b5feb59.png" height="323" width="600"]]
266 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_387ec7d00b5feb59.png?width=600&height=323&rev=1.1||alt="12.PLC Protocol_html_387ec7d00b5feb59.png" height="323" width="600"]]
246 246  
247 247  Click the [Apply] button to finish the setting.
248 248  
249 249  Click download and select the items as below, then click [execute] to download the configuration to PLC.
250 250  
251 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_cdef1c5ec8cc2105.png3Fwidth3D60026height3D43426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_cdef1c5ec8cc2105.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_cdef1c5ec8cc2105.png" height="434" width="600"]]
272 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_cdef1c5ec8cc2105.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_cdef1c5ec8cc2105.png" height="434" width="600"]]
252 252  
253 253   As soon as download is completed, connect PLC with serial port, then configure it in the [Specify Connection Destination Connection].
254 254  
255 255  Done.
256 256  
257 -**4）Configure the communication protocol**
278 +**Cable Wiring**
258 258  
259 -{{id name="Iimage-20220825104904-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dbaddd53e9951a17.png||alt="image-20220825104904-1.png" height="1033" width="1920"]]
280 +**RS422**
260 260  
261 -**5）Cable Wiring**
262 -
263 -* **RS422**
264 -
265 265  {{id name="Iimage-20220825105105-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d022c5ff4cf8c68e.png||alt="image-20220825105105-2.png" height="288" width="711"]]
266 266  
267 267  {{id name="Iimage-20220825105533-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50e173394c73f154.png||alt="image-20220825105533-3.png" height="246" width="420"]]
... ... @@ -270,7 +270,7 @@
270 270  
271 271  Mitsubishi FX5U series PLC
272 272  
273 -**1）V-BOX Settings**
290 +**V-BOX Settings**
274 274  
275 275  |**Items**|**Settings**|**Note**
276 276  |Protocol|Mitsubishi FX5U|
... ... @@ -278,75 +278,57 @@
278 278  |Port No.|5002|Must be the same as the PLC setting
279 279  |PLC station No.|0|
280 280  
281 -**2）Address List**
298 +(% style="text-align:center" %)
299 +[[image:三菱 FX5U 以太网协议配置.png]]
282 282  
283 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
284 -|(% rowspan="15" %)Bit|X|X|X o|0~~303237|
285 -|Y|Y|Y o|0~~303237|
286 -|M|M|M d|0~~99999|
287 -|B|B|B h|0~~7FFF|
288 -|F|F|F d|0~~32767|
289 -|SB|SB|SB h|0~~7FFF|
290 -|TS|TS|TS d|0~~1023|
291 -|TC|TC|TC d|0~~1023|
292 -|STS|STS|STS d|0~~1023|
293 -|STC|STC|STS d|0~~1023|
294 -|CS|CS|CS d|0~~1023|
295 -|CC|CC|CC d|0~~1023|
296 -|SM|SM|SM d|0~~9999|
297 -|L|L|L d|0~~32767|
298 -|S|S|S d|0~~4095|
299 -|(% rowspan="9" %)Word|W|W|W h|0~~3FF|
300 -|TN|TN|TN d|0~~1023|
301 -|STN|STN|STN d|0~~1023|
302 -|CN|CN|CN d|0~~1023|
303 -|R|R|R d|0~~32767|
304 -|SW|SW|SW h|0~~7FFF|
305 -|Z|Z|Z d|0~~23|
306 -|D|D|D d|0~~7999|
307 -|SD|SD|SD d|0~~11999|
301 +**Address List**
308 308  
309 -**3）PLC Settings (GX Works 3)**
303 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
304 +|(% rowspan="15" %)Bit|X|X o|0~~303237|
305 +|Y|Y o|0~~303237|
306 +|M|M d|0~~99999|
307 +|B|B h|0~~7FFF|
308 +|F|F d|0~~32767|
309 +|SB|SB h|0~~7FFF|
310 +|TS|TS d|0~~1023|
311 +|TC|TC d|0~~1023|
312 +|STS|STS d|0~~1023|
313 +|STC|STS d|0~~1023|
314 +|CS|CS d|0~~1023|
315 +|CC|CC d|0~~1023|
316 +|SM|SM d|0~~9999|
317 +|L|L d|0~~32767|
318 +|S|S d|0~~4095|
319 +|(% rowspan="9" %)Word|W|W h|0~~3FF|
320 +|TN|TN d|0~~1023|
321 +|STN|STN d|0~~1023|
322 +|CN|CN d|0~~1023|
323 +|R|R d|0~~32767|
324 +|SW|SW h|0~~7FFF|
325 +|Z|Z d|0~~23|
326 +|D|D d|0~~7999|
327 +|SD|SD d|0~~11999|
310 310  
311 -Find the [Ethernet port] in the navigation area.
329 +**PLC Settings (GX Works 3)**
330 +[Navigation]→[Parameter]→[FX5UCPU]→[Module Parameter]→[Ethernet Port]:[Basic Settings]→ [Own node settings]:[IP Address]192.168.40.11, [Subnet Mask]255.255.255.0, [Default Gateway]192.168.40.1,[ Communication Data Code] Binary.
312 312  
313 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_8e8f85ace087346c.png3Fwidth3D30026height3D59326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8e8f85ace087346c.png?width=300&height=593&rev=1.1||alt="12.PLC Protocol_html_8e8f85ace087346c.png" height="593" width="300"]]
332 +(% style="text-align:center" %)
333 +[[image:1.3.1.png]]
314 314  
315 -Select [Own Node Settings] in the [Setting Item List];
335 +[External Device Configuration]→[Detailed Settings]→[Ethernet Configuration(Built-in Ethernet Port)]→[Ethernet Device (General)]→[SLMP Connection Module] Drag under Host for Connection No.1→[Port No.]5002→[Close with Reflecting the Setting]
316 316  
317 -Set [IP Address], [Subnet Mask], [Default Gateway];
337 +(% style="text-align:center" %)
338 +[[image:1.3.2.png]]
318 318  
319 -Click [Detailed Settings] into [Ethernet Configuration (Built-in Ethernet Port)] windows;
340 +**Cable Wiring**
320 320  
321 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5d98495052c8c10e.png3Fwidth3D60026height3D33926rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5d98495052c8c10e.png?width=600&height=339&rev=1.1||alt="12.PLC Protocol_html_5d98495052c8c10e.png" height="339" width="600"]]
322 -
323 -Select [SLMP Connection Module] and add into host station as below picture shows;
324 -
325 -Set Port number as 5002 (this is necessary settings);
326 -
327 -Click [Close with Reflecting the Setting] to save and close window;
328 -
329 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_14b489fdc6c6589d.png3Fwidth3D60026height3D35026rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_14b489fdc6c6589d.png?width=600&height=350&rev=1.1||alt="12.PLC Protocol_html_14b489fdc6c6589d.png" height="350" width="600"]]
330 -
331 -Click [Apply] to completed Etherenet settings;
332 -
333 -Switch to the [On line data operation] interface as below, check the item and click [Execute] to download.
334 -
335 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_c93025a968a8a9e7.png3Fwidth3D60026height3D43426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_c93025a968a8a9e7.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_c93025a968a8a9e7.png" height="434" width="600"]]
336 -
337 -**4）Configure the communication protocol**
338 -
339 -{{id name="Iimage-20220825112403-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_caa9bf4d8cc6de0f.png||alt="图片-20220825112403-1.png" height="1033" width="1920"]]
340 -
341 -**5）Cable Wiring**
342 -
343 343  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
344 344  
345 -== {{id name="HL02Serial"/}}**L02 Serial ** ==
344 +== **L02 Serial ** ==
346 346  
347 347  Mitsubishi L02 series CPU built-in serial port.
348 348  
349 -**1）V-BOX Settings**
348 +**V-BOX Settings**
350 350  
351 351  |**Item**|**Settings**|**Note**
352 352  |Protocol|Mitsubishi L02|
... ... @@ -357,56 +357,57 @@
357 357  |Stop bit|1|
358 358  |PLC station No.|1~~255|Need to be the same as PLC settings
359 359  
360 -**2）Address List**
359 +(% style="text-align:center" %)
360 +[[image:三菱 L02串口协议配置.png]]
361 361  
362 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
363 -|Bit|X|X|X h|0~~FFFF|
364 -|Bit|Y|Y|Y h|0~~FFFF|
365 -|Bit|M|M|M d|0~~9999|
366 -|Bit|L|L|L d|0~~9999|
367 -|Bit|F|F|F d|0~~9999|
368 -|Bit|B|B|B h|0~~FFFF|
369 -|Bit|V|V|V d|0~~2047|
370 -|Bit|TC|TC|TC d|0~~9999|
371 -|Bit|SS|SS|SS d|0~~9999|
372 -|Bit|SC|SC|SC d|0~~9999|
373 -|Bit|CS|CS|CS d|0~~9999|
374 -|Bit|CC|CC|CC d|0~~9999|
375 -|Bit|SB|SB|SB h|0~~FFFF|
376 -|Bit|SM|SM|SM d|0~~2047|
377 -|Bit|STS|STS|STS d|0~~1023|
378 -|Bit|S|S|S d|0~~9999|
379 -|Bit|DX|DX|DX h|0~~FFFF|
380 -|Bit|DY|DY|DY h|0~~FFFF|
381 -|Bit|TS|TS|TS d|0~~9999|
382 -|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
383 -|Word|W|W|W h|0~~FFFF|
384 -|Word|TN|TN|TN d|0~~99999|
385 -|Word|SN|SN|SN d|0~~99999|
386 -|Word|CN|CN|CN d|0~~99999|
387 -|Word|R|R|R d|0~~99999|
388 -|Word|SW|SW|SW h|0~~FFFF|
389 -|Word|Z|Z|Z d|0~~99999|
390 -|Word|ZR|ZR|ZR h|0~~FFFF|
391 -|Word|D|D|D d|0~~99999|
362 +**Address List**
392 392  
393 -**3）Communication Settings**
364 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
365 +|(% colspan="1" rowspan="20" %)Bit
366 + |X|X h|0~~FFFF|
367 +|Y|Y h|0~~FFFF|
368 +|M|M d|0~~9999|
369 +|L|L d|0~~9999|
370 +|F|F d|0~~9999|
371 +|B|B h|0~~FFFF|
372 +|V|V d|0~~2047|
373 +|TC|TC d|0~~9999|
374 +|SS|SS d|0~~9999|
375 +|SC|SC d|0~~9999|
376 +|CS|CS d|0~~9999|
377 +|CC|CC d|0~~9999|
378 +|SB|SB h|0~~FFFF|
379 +|SM|SM d|0~~2047|
380 +|STS|STS d|0~~1023|
381 +|S|S d|0~~9999|
382 +|DX|DX h|0~~FFFF|
383 +|DY|DY h|0~~FFFF|
384 +|TS|TS d|0~~9999|
385 +|Dbit|Dbit d.d|0~~99999.0~~15|
386 +|(% colspan="1" rowspan="9" %)Word
387 + |W|W h|0~~FFFF|
388 +|TN|TN d|0~~99999|
389 +|SN|SN d|0~~99999|
390 +|CN|CN d|0~~99999|
391 +|R|R d|0~~99999|
392 +|SW|SW h|0~~FFFF|
393 +|Z|Z d|0~~99999|
394 +|ZR|ZR h|0~~FFFF|
395 +|D|D d|0~~99999|
394 394  
395 -{{id name="Iimage-20220825160648-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_cfed67f2ecb4ccec.png||alt="image-20220825160648-3.png" height="1009" width="1920"]]
397 +**Cable Wiring**
396 396  
397 -**4）Cable Wiring**
399 +**RS422**
398 398  
399 -* **RS422**
401 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_90e38f152d639809.png||alt="image-20220825161612-8.png" height="278" width="612"]]
400 400  
401 -{{id name="Iimage-20220825161612-8.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_90e38f152d639809.png||alt="image-20220825161612-8.png" height="278" width="612"]]
403 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d301e675d8224725.png||alt="image-20220825160820-4.png" height="208" width="359"]]
402 402  
403 -{{id name="Iimage-20220825160820-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d301e675d8224725.png||alt="image-20220825160820-4.png" height="208" width="359"]]
405 +== **L02 Ethernet ** ==
404 404  
405 -== {{id name="HL02Ethernet"/}}**L02 Ethernet ** ==
406 -
407 407  Mitsubishi L series CPU built-in Ethernet port.
408 408  
409 -**1）V-BOX Settings**
409 +**V-BOX Settings**
410 410  
411 411  |**Items**|**Settings**|**Note**
412 412  |Protocol|MIT L02 CPU MELSEC|
... ... @@ -414,41 +414,11 @@
414 414  |Port No.|1025|Must be the same as the PLC setting
415 415  |PLC station No.|0|Must be the same as the PLC setting
416 416  
417 -**2）Address List**
417 +(% style="text-align:center" %)
418 +[[image:三菱 L02以太网协议配置1.png]]
418 418  
419 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
420 -|Bit|X|X|X h|0~~FFFF|
421 -|Bit|Y|Y|Y h|0~~FFFF|
422 -|Bit|M|M|M d|0~~9999|
423 -|Bit|L|L|L d|0~~9999|
424 -|Bit|F|F|F d|0~~9999|
425 -|Bit|B|B|B h|0~~FFFF|
426 -|Bit|V|V|V d|0~~2047|
427 -|Bit|TC|TC|TC d|0~~9999|
428 -|Bit|SS|SS|SS d|0~~9999|
429 -|Bit|SC|SC|SC d|0~~9999|
430 -|Bit|CS|CS|CS d|0~~9999|
431 -|Bit|CC|CC|CC d|0~~9999|
432 -|Bit|SB|SB|SB h|0~~FFFF|
433 -|Bit|SM|SM|SM d|0~~2047|
434 -|Bit|STS|STS|STS d|0~~1023|
435 -|Bit|S|S|S d|0~~9999|
436 -|Bit|DX|DX|DX h|0~~FFFF|
437 -|Bit|DY|DY|DY h|0~~FFFF|
438 -|Bit|TS|TS|TS d|0~~9999|
439 -|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
440 -|Word|W|W|W h|0~~FFFF|
441 -|Word|TN|TN|TN d|0~~99999|
442 -|Word|SN|SN|SN d|0~~99999|
443 -|Word|CN|CN|CN d|0~~99999|
444 -|Word|R|R|R d|0~~99999|
445 -|Word|SW|SW|SW h|0~~FFFF|
446 -|Word|Z|Z|Z d|0~~99999|
447 -|Word|ZR|ZR|ZR h|0~~FFFF|
448 -|Word|D|D|D d|0~~99999|
420 +**PLC Settings (GX Works2 )**
449 449  
450 -**3）PLC Settings (GX Works2 )**
451 -
452 452  Create a project
453 453  
454 454  Set PLC IP, subnet mask and gateway;
... ... @@ -455,11 +455,11 @@
455 455  
456 456  Select [Binary Code] as communication data code;
457 457  
458 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_776e17505f3fc6c0.png3Fwidth3D60026height3D52426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_776e17505f3fc6c0.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_776e17505f3fc6c0.png" height="524" width="600"]]
428 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_776e17505f3fc6c0.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_776e17505f3fc6c0.png" height="524" width="600"]]
459 459  
460 460  Set PLC port number, for example 1025
461 461  
462 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_8d0d1a22d388f70b.png3Fwidth3D60026height3D52426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8d0d1a22d388f70b.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
432 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8d0d1a22d388f70b.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
463 463  
464 464  Save settings;
465 465  
... ... @@ -467,14 +467,10 @@
467 467  
468 468  Restart PLC device;
469 469  
470 -**4）Configure the communication protocol**
440 +**Cable Wiring**
471 471  
472 -{{id name="Iimage-20220825142659-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_fafc9b29e20178c0.png||alt="image-20220825142659-1.png" height="1010" width="1920"]]
442 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
473 473  
474 -**5）Cable Wiring**
475 -
476 -{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
477 -
478 478  == {{id name="HQ12HSerial"/}}**Q12H Serial ** ==
479 479  
480 480  This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
... ... @@ -485,7 +485,7 @@
485 485  
486 486  Mitsubishi QJ71E71 Ethernet communication module;
487 487  
488 -**1）V-BOX Settings**
454 +**V-BOX Settings**
489 489  
490 490  |**Items**|**Settings**|**Note**
491 491  |Protocol|MIT QJ71E71 MELSEC|
... ... @@ -493,48 +493,51 @@
493 493  |Port No.|1025|Must be the same as the PLC setting
494 494  |PLC station No.|0|Must be the same as the PLC setting
495 495  
496 -**2）Address List**
462 +(% style="text-align:center" %)
463 +[[image:三菱 QJ71 以太网协议配置.png]]
497 497  
498 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
499 -|(% rowspan="18" %)Bit|X|X|X h|0~~1FFF|
500 -|Y|Y|Y h|0~~1FFF|
501 -|M|M|M d|0~~99999|
502 -|L|L|L d|0~~8191|
503 -|F|F|F d|0~~2047|
504 -|B|B|B h|0~~1FFF|
505 -|V|V|V d|0~~2047|
506 -|TS|TS|TS d|0~~2047|
507 -|TC|TC|TC d|0~~2047|
508 -|SS|SS|SS d|0~~2047|
509 -|SC|SC|SC d|0~~2047|
510 -|CS|CS|CS d|0~~1023|
511 -|CC|CC|CC d|0~~1023|
512 -|SB|SB|SB h|0~~7FF|
513 -|S|S|S d|0~~8191|
514 -|DX|DX|DX h|0~~1FFF|
515 -|DY|DY|DY h|0~~1FFF|
516 -|SM|SM|SM d|8000~~9999|
517 -|(% rowspan="10" %)Word|SD|SD|SD d|0~~2047|
518 -|D|D|D d|0~~12287|
519 -|W|W|W h|0~~1FFF|
520 -|TN|TN|TN d|0~~2047|
521 -|SN|SN|SN d|0~~2047|
522 -|CN|CN|CN d|0~~1023|
523 -|R|R|R d|0~~32767|
524 -|SW|SW|SW h|0~~7FF|
525 -|Z|Z|Z d|0~~15|
526 -|ZR|ZR|ZR h|0~~FE7FF|
465 +**Address List**
527 527  
528 -**3）PLC Settings(GX Works2)**
467 +|**Type**|**Device registers**|**Format**|**Range**|**Note**
468 +|(% rowspan="18" %)Bit|X|X h|0~~1FFF|
469 +|Y|Y h|0~~1FFF|
470 +|M|M d|0~~99999|
471 +|L|L d|0~~8191|
472 +|F|F d|0~~2047|
473 +|B|B h|0~~1FFF|
474 +|V|V d|0~~2047|
475 +|TS|TS d|0~~2047|
476 +|TC|TC d|0~~2047|
477 +|SS|SS d|0~~2047|
478 +|SC|SC d|0~~2047|
479 +|CS|CS d|0~~1023|
480 +|CC|CC d|0~~1023|
481 +|SB|SB h|0~~7FF|
482 +|S|S d|0~~8191|
483 +|DX|DX h|0~~1FFF|
484 +|DY|DY h|0~~1FFF|
485 +|SM|SM d|8000~~9999|
486 +|(% rowspan="10" %)Word|SD|SD d|0~~2047|
487 +|D|D d|0~~12287|
488 +|W|W h|0~~1FFF|
489 +|TN|TN d|0~~2047|
490 +|SN|SN d|0~~2047|
491 +|CN|CN d|0~~1023|
492 +|R|R d|0~~32767|
493 +|SW|SW h|0~~7FF|
494 +|Z|Z d|0~~15|
495 +|ZR|ZR h|0~~FE7FF|
529 529  
497 +**PLC Settings(GX Works2)**
498 +
530 530  * Click [Ethernet/CC IE/MELSECNET];
531 531  * Please select [Ethernet] as network type;
532 532  * Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
533 533  * Select [Online] as Mode;
534 -* {{id name="Iimage-20221119171343-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d54f23688c520f78.png||alt="image-20221119171343-2.png" height="341" width="587"]]
503 +* [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d54f23688c520f78.png||alt="image-20221119171343-2.png" height="341" width="587"]]
535 535  * Click [Operation setting] to set IP;
536 536  * Select [Binary Code] as [Communication Data Code];
537 -* {{id name="Iimage-20221119171436-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ce8e6a671b9508e0.png||alt="image-20221119171436-3.png" height="354" width="588"]]
506 +* [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ce8e6a671b9508e0.png||alt="image-20221119171436-3.png" height="354" width="588"]]
538 538  * Click [Open setting]
539 539  * Set protocol: TCP;
540 540  * Set [unpassive] in [Open system];
... ... @@ -547,10 +547,6 @@
547 547  * {{id name="Iimage-20221119171611-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1d8e2f4fb7c72471.png||alt="image-20221119171611-4.png" height="354" width="588"]]
548 548  * Download project into PLC and restart it
549 549  
550 -**4）Configure the communication protocol**
519 +**Cable Wiring**
551 551  
552 -{{id name="Iimage-20221119171832-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50990385ef491b9e.png||alt="image-20221119171832-5.png" height="354" width="625"]]
553 -
554 -**5）Cable Wiring**
555 -
556 556  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1.2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
1.3.1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +107.7 KB
Content
1.3.2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +131.6 KB
Content
1.5.1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +103.4 KB
Content
1.5.2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1694743608503-875.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +98.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_1717efe8d969a43c.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +14.8 KB
Content
三菱 FN盒子通讯配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +65.5 KB
Content
三菱 FX3U 串口协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +65.5 KB
Content
三菱 FX3U 以太网协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
三菱 FX5U 串口协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +65.0 KB
Content
三菱 FX5U 以太网协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.2 KB
Content
三菱 L02 以太网盒子通讯配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +66.5 KB
Content
三菱 L02串口协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.4 KB
Content
三菱 L02以太网协议配置1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
三菱 QJ71 以太网协议配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content