Changes for page Mitsubishi

Last modified by Joe on 2024/05/21 10:53

From 44.1 to 43.1

From version 43.1

edited by Theodore Xu
on 2023/09/15 10:10

Change comment: There is no comment for this version

To version 1.1

edited by Leo Wei
on 2023/08/24 14:11

Change comment: Changed document syntax from [XWiki 2.1] to [xwiki/2.1].

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 34 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,0 @@
1		-Mitsubishi

Author

@@ -1,1 +1,1 @@
--XWiki.AiXia
++XWiki.admin

Content

@@ -1,620 +1,0 @@
--== **FX1S,1N,2N Serial ** ==
--
--Supported Series: Mitsubishi FX1S, FX1N, FX2N series
--
--**V-BOX Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi FX1S/FX1N/FX2N|
--|Connection|RS422/RS485/RS232|
--|Baud rate|9600~~115200|
--|Data bit|7/8|
--|Parity|EVEN/Odd/None|
--|Stop bit|1/2|
--|PLC station No.|1~~255|
--
--**Address List**
--
--|**Type**|**Device registers**|**V-Box registers**|**Format**|**Range**|**Note**
--|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Configure the communication protocol**
--
--{{id name="Iimage-20220825102844-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dc262f14b14cf564.png||alt="image-20220825102844-3.png" height="1011" width="1920"]]
--
--**Cable Wiring**
--
--**RS422**
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9294a40c62eb99be.png||alt="image-20220825103350-4.png" height="284" width="723"]]
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
--
--== **FX3U,3G,3GA Serial ** ==
--
--Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
--
--**V-BOX Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi FX3U/3G/3GA|
--|Connection|RS422/RS485/RS232|
--|Baud rate|9600~~115200|
--|Data bit|7/8|
--|Parity|EVEN/Odd/None|
--|Stop bit|1/2|
--|PLC station No.|1~~255|
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Configure the communication protocol**
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_4d2a4921240d23c6.png||alt="image-20220825102649-2.png" height="1009" width="1920"]]
--
--**PLC Setting**
--
--Open GX Works2, create a new PLC project or open the project that has been created.
--Create new project： [Project]→[New]→[Series] FXCPU→[Type] FX3G/FX3GC→[OK].
--
--(% style="text-align:center" %)
--[[image:1.2.png]]
--
--PLC Default Parameters:
--[Connection type]RS422;[Baud rate]9600, [Data bit]7, [Stop bit]1,[Parity]EVEN; [Station number]0
--Note:The serial port parameters should be set depending on field requirements
--
--PC and PLC connection:
--
--[All connection]→[Connection 1]→[Transfer Setup Connection1]→[Serial USB]→RS-232C: PC and PLC are connected by USB to RS232 adapter,choose corresponding [COM Port]COM 5 →[Transmission speed]9.6Kbps→[setup] →[Parity]EVEN→[Data bits]7→[Stop bits]1→[OK]
--
--(% style="text-align:center" %)
--[[image:1.5.1.png]]
--
--Connection test:when connection is OK,the GX Works2 prompts “Successfully connected with the FX3G/FX3GCCPU.”
--
--(% style="text-align:center" %)
--[[image:1.5.2.png]]
--
--**Cable Wiring**
--
--**RS422**
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e904556bb758dfe.png||alt="image-20220825103421-5.png" height="296" width="715"]]
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
--
--== **FX NOPROTOCOL** ==
--
--Mitsubishi FX3G-RS232-BD
--
--**V-Box Settings**
--
--|=**Item**|=**Settings**|=**Note**
--|Protocol|Mitsubishi FX NOPROTOCOL|
--|Connection|RS232|
--|Baud rate|9600|
--|Data bit|7|
--|Parity|EVEN|
--|Stop bit|1|
--|PLC station No.|0|
--
--(% style="text-align:center" %)
--[[image:三菱 FN盒子通讯配置.png]]
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|(% rowspan="8" %)Bit|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|Lamp|Lamp|Lamp d|0~~0|
--|(% rowspan="8" %)Word|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Configure the communication protocol**
--
--== **FX3U Ethernet ** ==
--
--Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
--
--**V-BOX Settings**
--
--|Items|Settings|Note
--|Protocol|Mitsubishi FX3U|
--|Connection|Ethernet|
--|Port No.|5009|Must be the same as the PLC setting
--|PLC station No.|0|
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="7" %)Bit|X|X|X OOO|0~~377|
--|Y|Y|Y OOO|0~~377|
--|M|M|M DDDD|0~~7679|
--|SM|SM|SM DDDD|8000~~8511|
--|S|S|S DDDD|0~~4095|
--|TS|TS|TS DDD|0~~511|
--|CS|CS|CS DDD|0~~255|
--|(% rowspan="5" %)Word|CN|CN|CN DDD|0~~199|
--|TN|TN|TN DDD|0~~511|
--|D|D|D DDDD|0~~7999|
--|SD|SD|SD DDDD|8000~~8511|
--|R|R|R DDDDD|0~~32767|
--
--**Ethernet Module Settings**
--
--FX3U-ENET-L module configuration
-- Set up the FX3U-ENET-L Ethernet module settings as follows.
-- Select the module location, which in this document is Module 0.
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_949d5d77c1d9cf1e.png||alt="image-20221116105850-1.png" height="573" width="706"]]
--
--Select "Operational setting" to enter the following screen.
--
--The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dfbfdd586c855c47.png||alt="image-20221116105947-1.png" height="573" width="706"]]
--
--Select "Open setting" to enter the setting interface, the settings are as follows.
--
--The third item "Protocol" selects TCP, and "Open system" selects MELSOFT connection, which allows the
--
--Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7c01ac15090fcc5b.png||alt="image-20221116110802-1.png" height="549" width="706"]]
--
--Click on "transter setup" - "PC side I/F setting", see the following figure.
--
--After setting, the first download must use the programming cable, as shown in the figure; after that, can
--
--use the IP set in the "Ethernet board" to communicate directly with the network cable.
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d6fd9ce3b96f99e2.png||alt="image-20221116110832-2.png" height="423" width="708"]]
--
--Read and write data from the Ethernet module
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_690b3e57b29cfd4b.png||alt="image-20221116110907-3.png" height="549" width="706"]]
--
--Set "Transter setup" to COM communication, and read or write operation as shown below
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b317253742f7151.png||alt="image-20221116110917-4.png" height="549" width="706"]]
--
--**PLC Settings (GX Works 2)**
--
--Create a blank FX5U project
--
--Find Current Connection in the navigation
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d2a46ba9c005cf38.png||alt="image-20221116111427-1.png" height="421" width="705"]]
--
--Select Connection Channel List
--
--Select Ethernet board communication
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8f49721a3e5b0ef9.png||alt="image-20221116111451-2.png" height="421" width="705"]]
--
--Select Ethernet Module
-- Set the IP address of the PLC
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e9a9e29a46a1041.png||alt="image-20221116111509-3.png" height="666" width="699"]]
--
--Read or write PLC data, in this document is read
--
--{{id name="Iimage-20221116111651-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_e3d629103727a423.png||alt="image-20221116111651-4.png" height="416" width="697"]]
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7f29923ebcb670d1.png||alt="image-20221116111727-5.png" height="416" width="697"]]
--
--**Configure the communication protocol**
--
--[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b2cdc33b6eb92b67.png||alt="image-20221119101946-2.png" height="395" width="695"]]
--
--== {{id name="HFX5USerial"/}}**FX5U Serial ** ==
--
--Mitsubishi FX5U series PLC
--
--**1）V-BOX Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi FX5U|
--|Connection|RS422/RS485|
--|Baud rate|9600|
--|Data bit|7|
--|Parity|Odd|
--|Stop bit|1|
--|PLC station No.|1~~255|Need to be the same as PLC settings
--
--**2）Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="15" %)Bit|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|B|B|B h|0~~7FFF|
--|F|F|F d|0~~32767|
--|SB|SB|SB h|0~~7FFF|
--|TS|TS|TS d|0~~1023|
--|TC|TC|TC d|0~~1023|
--|STS|STS|STS d|0~~1023|
--|STC|STC|STS d|0~~1023|
--|CS|CS|CS d|0~~1023|
--|CC|CC|CC d|0~~1023|
--|SM|SM|SM d|0~~9999|
--|L|L|L d|0~~32767|
--|S|S|S d|0~~4095|
--|(% rowspan="9" %)Word|W|W|W h|0~~3FF|
--|TN|TN|TN d|0~~1023|
--|STN|STN|STN d|0~~1023|
--|CN|CN|CN d|0~~1023|
--|R|R|R d|0~~32767|
--|SW|SW|SW h|0~~7FFF|
--|Z|Z|Z d|0~~23|
--|D|D|D d|0~~7999|
--|SD|SD|SD d|0~~11999|
--
--**3）PLC Settings (GX Works 3)**
--
--Create a blank FX5U project
--
--Find the 485 serial port module in the system navigation bar and double click to enter the settings.
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5c9cb13fac1e6c93.png3Fwidth3D20026height3D46226rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5c9cb13fac1e6c93.png?width=200&height=462&rev=1.1||alt="12.PLC Protocol_html_5c9cb13fac1e6c93.png" height="462" width="200"]]
--
--Select protocol in the setting item, and set parameters.
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_de942589ca070228.png3Fwidth3D60026height3D32426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_de942589ca070228.png?width=600&height=324&rev=1.1||alt="12.PLC Protocol_html_de942589ca070228.png" height="324" width="600"]]
--
--Set station number, and [Message Pattern] (Pattern 1 or Pattern 4)
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_387ec7d00b5feb59.png3Fwidth3D60026height3D32326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_387ec7d00b5feb59.png?width=600&height=323&rev=1.1||alt="12.PLC Protocol_html_387ec7d00b5feb59.png" height="323" width="600"]]
--
--Click the [Apply] button to finish the setting.
--
--Click download and select the items as below, then click [execute] to download the configuration to PLC.
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_cdef1c5ec8cc2105.png3Fwidth3D60026height3D43426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_cdef1c5ec8cc2105.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_cdef1c5ec8cc2105.png" height="434" width="600"]]
--
-- As soon as download is completed, connect PLC with serial port, then configure it in the [Specify Connection Destination Connection].
--
--Done.
--
--**4）Configure the communication protocol**
--
--{{id name="Iimage-20220825104904-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dbaddd53e9951a17.png||alt="image-20220825104904-1.png" height="1033" width="1920"]]
--
--**5）Cable Wiring**
--
--* **RS422**
--
--{{id name="Iimage-20220825105105-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d022c5ff4cf8c68e.png||alt="image-20220825105105-2.png" height="288" width="711"]]
--
--{{id name="Iimage-20220825105533-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50e173394c73f154.png||alt="image-20220825105533-3.png" height="246" width="420"]]
--
--== **FX5U Ethernet ** ==
--
--Mitsubishi FX5U series PLC
--
--**1）V-BOX Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|Mitsubishi FX5U|
--|Connection|Ethernet|
--|Port No.|5002|Must be the same as the PLC setting
--|PLC station No.|0|
--
--**2）Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="15" %)Bit|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|B|B|B h|0~~7FFF|
--|F|F|F d|0~~32767|
--|SB|SB|SB h|0~~7FFF|
--|TS|TS|TS d|0~~1023|
--|TC|TC|TC d|0~~1023|
--|STS|STS|STS d|0~~1023|
--|STC|STC|STS d|0~~1023|
--|CS|CS|CS d|0~~1023|
--|CC|CC|CC d|0~~1023|
--|SM|SM|SM d|0~~9999|
--|L|L|L d|0~~32767|
--|S|S|S d|0~~4095|
--|(% rowspan="9" %)Word|W|W|W h|0~~3FF|
--|TN|TN|TN d|0~~1023|
--|STN|STN|STN d|0~~1023|
--|CN|CN|CN d|0~~1023|
--|R|R|R d|0~~32767|
--|SW|SW|SW h|0~~7FFF|
--|Z|Z|Z d|0~~23|
--|D|D|D d|0~~7999|
--|SD|SD|SD d|0~~11999|
--
--**3）PLC Settings (GX Works 3)**
--
--Find the [Ethernet port] in the navigation area.
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_8e8f85ace087346c.png3Fwidth3D30026height3D59326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8e8f85ace087346c.png?width=300&height=593&rev=1.1||alt="12.PLC Protocol_html_8e8f85ace087346c.png" height="593" width="300"]]
--
--Select [Own Node Settings] in the [Setting Item List];
--
--Set [IP Address], [Subnet Mask], [Default Gateway];
--
--Click [Detailed Settings] into [Ethernet Configuration (Built-in Ethernet Port)] windows;
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5d98495052c8c10e.png3Fwidth3D60026height3D33926rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5d98495052c8c10e.png?width=600&height=339&rev=1.1||alt="12.PLC Protocol_html_5d98495052c8c10e.png" height="339" width="600"]]
--
--Select [SLMP Connection Module] and add into host station as below picture shows;
--
--Set Port number as 5002 (this is necessary settings);
--
--Click [Close with Reflecting the Setting] to save and close window;
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_14b489fdc6c6589d.png3Fwidth3D60026height3D35026rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_14b489fdc6c6589d.png?width=600&height=350&rev=1.1||alt="12.PLC Protocol_html_14b489fdc6c6589d.png" height="350" width="600"]]
--
--Click [Apply] to completed Etherenet settings;
--
--Switch to the [On line data operation] interface as below, check the item and click [Execute] to download.
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_c93025a968a8a9e7.png3Fwidth3D60026height3D43426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_c93025a968a8a9e7.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_c93025a968a8a9e7.png" height="434" width="600"]]
--
--**4）Configure the communication protocol**
--
--{{id name="Iimage-20220825112403-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_caa9bf4d8cc6de0f.png||alt="图片-20220825112403-1.png" height="1033" width="1920"]]
--
--**5）Cable Wiring**
--
--[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
--== {{id name="HL02Serial"/}}**L02 Serial ** ==
--
--Mitsubishi L02 series CPU built-in serial port.
--
--**1）V-BOX Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi L02|
--|Connection|RS422|
--|Baud rate|115200|
--|Data bit|8|
--|Parity|Odd|
--|Stop bit|1|
--|PLC station No.|1~~255|Need to be the same as PLC settings
--
--**2）Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|Bit|X|X|X h|0~~FFFF|
--|Bit|Y|Y|Y h|0~~FFFF|
--|Bit|M|M|M d|0~~9999|
--|Bit|L|L|L d|0~~9999|
--|Bit|F|F|F d|0~~9999|
--|Bit|B|B|B h|0~~FFFF|
--|Bit|V|V|V d|0~~2047|
--|Bit|TC|TC|TC d|0~~9999|
--|Bit|SS|SS|SS d|0~~9999|
--|Bit|SC|SC|SC d|0~~9999|
--|Bit|CS|CS|CS d|0~~9999|
--|Bit|CC|CC|CC d|0~~9999|
--|Bit|SB|SB|SB h|0~~FFFF|
--|Bit|SM|SM|SM d|0~~2047|
--|Bit|STS|STS|STS d|0~~1023|
--|Bit|S|S|S d|0~~9999|
--|Bit|DX|DX|DX h|0~~FFFF|
--|Bit|DY|DY|DY h|0~~FFFF|
--|Bit|TS|TS|TS d|0~~9999|
--|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
--|Word|W|W|W h|0~~FFFF|
--|Word|TN|TN|TN d|0~~99999|
--|Word|SN|SN|SN d|0~~99999|
--|Word|CN|CN|CN d|0~~99999|
--|Word|R|R|R d|0~~99999|
--|Word|SW|SW|SW h|0~~FFFF|
--|Word|Z|Z|Z d|0~~99999|
--|Word|ZR|ZR|ZR h|0~~FFFF|
--|Word|D|D|D d|0~~99999|
--
--**3）Communication Settings**
--
--{{id name="Iimage-20220825160648-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_cfed67f2ecb4ccec.png||alt="image-20220825160648-3.png" height="1009" width="1920"]]
--
--**4）Cable Wiring**
--
--* **RS422**
--
--{{id name="Iimage-20220825161612-8.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_90e38f152d639809.png||alt="image-20220825161612-8.png" height="278" width="612"]]
--
--{{id name="Iimage-20220825160820-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d301e675d8224725.png||alt="image-20220825160820-4.png" height="208" width="359"]]
--
--== {{id name="HL02Ethernet"/}}**L02 Ethernet ** ==
--
--Mitsubishi L series CPU built-in Ethernet port.
--
--**1）V-BOX Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|MIT L02 CPU MELSEC|
--|Connection|Ethernet|
--|Port No.|1025|Must be the same as the PLC setting
--|PLC station No.|0|Must be the same as the PLC setting
--
--**2）Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|Bit|X|X|X h|0~~FFFF|
--|Bit|Y|Y|Y h|0~~FFFF|
--|Bit|M|M|M d|0~~9999|
--|Bit|L|L|L d|0~~9999|
--|Bit|F|F|F d|0~~9999|
--|Bit|B|B|B h|0~~FFFF|
--|Bit|V|V|V d|0~~2047|
--|Bit|TC|TC|TC d|0~~9999|
--|Bit|SS|SS|SS d|0~~9999|
--|Bit|SC|SC|SC d|0~~9999|
--|Bit|CS|CS|CS d|0~~9999|
--|Bit|CC|CC|CC d|0~~9999|
--|Bit|SB|SB|SB h|0~~FFFF|
--|Bit|SM|SM|SM d|0~~2047|
--|Bit|STS|STS|STS d|0~~1023|
--|Bit|S|S|S d|0~~9999|
--|Bit|DX|DX|DX h|0~~FFFF|
--|Bit|DY|DY|DY h|0~~FFFF|
--|Bit|TS|TS|TS d|0~~9999|
--|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
--|Word|W|W|W h|0~~FFFF|
--|Word|TN|TN|TN d|0~~99999|
--|Word|SN|SN|SN d|0~~99999|
--|Word|CN|CN|CN d|0~~99999|
--|Word|R|R|R d|0~~99999|
--|Word|SW|SW|SW h|0~~FFFF|
--|Word|Z|Z|Z d|0~~99999|
--|Word|ZR|ZR|ZR h|0~~FFFF|
--|Word|D|D|D d|0~~99999|
--
--**3）PLC Settings (GX Works2 )**
--
--Create a project
--
--Set PLC IP, subnet mask and gateway;
--
--Select [Binary Code] as communication data code;
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_776e17505f3fc6c0.png3Fwidth3D60026height3D52426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_776e17505f3fc6c0.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_776e17505f3fc6c0.png" height="524" width="600"]]
--
--Set PLC port number, for example 1025
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_8d0d1a22d388f70b.png3Fwidth3D60026height3D52426rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8d0d1a22d388f70b.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
--
--Save settings;
--
--Download project into PLC device;
--
--Restart PLC device;
--
--**4）Configure the communication protocol**
--
--{{id name="Iimage-20220825142659-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_fafc9b29e20178c0.png||alt="image-20220825142659-1.png" height="1010" width="1920"]]
--
--**5）Cable Wiring**
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
--== {{id name="HQ12HSerial"/}}**Q12H Serial ** ==
--
--This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
--
--**[[Download link>>url:https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]**
--
--== **QJ71E71 Ethernet ** ==
--
--Mitsubishi QJ71E71 Ethernet communication module;
--
--**1）V-BOX Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|MIT QJ71E71 MELSEC|
--|Connection|Ethernet|
--|Port No.|1025|Must be the same as the PLC setting
--|PLC station No.|0|Must be the same as the PLC setting
--
--**2）Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="18" %)Bit|X|X|X h|0~~1FFF|
--|Y|Y|Y h|0~~1FFF|
--|M|M|M d|0~~99999|
--|L|L|L d|0~~8191|
--|F|F|F d|0~~2047|
--|B|B|B h|0~~1FFF|
--|V|V|V d|0~~2047|
--|TS|TS|TS d|0~~2047|
--|TC|TC|TC d|0~~2047|
--|SS|SS|SS d|0~~2047|
--|SC|SC|SC d|0~~2047|
--|CS|CS|CS d|0~~1023|
--|CC|CC|CC d|0~~1023|
--|SB|SB|SB h|0~~7FF|
--|S|S|S d|0~~8191|
--|DX|DX|DX h|0~~1FFF|
--|DY|DY|DY h|0~~1FFF|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="10" %)Word|SD|SD|SD d|0~~2047|
--|D|D|D d|0~~12287|
--|W|W|W h|0~~1FFF|
--|TN|TN|TN d|0~~2047|
--|SN|SN|SN d|0~~2047|
--|CN|CN|CN d|0~~1023|
--|R|R|R d|0~~32767|
--|SW|SW|SW h|0~~7FF|
--|Z|Z|Z d|0~~15|
--|ZR|ZR|ZR h|0~~FE7FF|
--
--**3）PLC Settings(GX Works2)**
--
--* Click [Ethernet/CC IE/MELSECNET];
--* Please select [Ethernet] as network type;
--* Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
--* Select [Online] as Mode;
--* {{id name="Iimage-20221119171343-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d54f23688c520f78.png||alt="image-20221119171343-2.png" height="341" width="587"]]
--* Click [Operation setting] to set IP;
--* Select [Binary Code] as [Communication Data Code];
--* {{id name="Iimage-20221119171436-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ce8e6a671b9508e0.png||alt="image-20221119171436-3.png" height="354" width="588"]]
--* Click [Open setting]
--* Set protocol: TCP;
--* Set [unpassive] in [Open system];
--* Set [receive] in [Fixed buffer];
--* Set [procedure Exist] in [Fixed buffer communication];
--* Disable [Pairing open];
--* Set [No confirm] in [Existence confirmation];
--* Host station port number: 5009;
--* Save settings;
--* {{id name="Iimage-20221119171611-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1d8e2f4fb7c72471.png||alt="image-20221119171611-4.png" height="354" width="588"]]
--* Download project into PLC and restart it
--
--**4）Configure the communication protocol**
--
--{{id name="Iimage-20221119171832-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50990385ef491b9e.png||alt="image-20221119171832-5.png" height="354" width="625"]]
--
--**5）Cable Wiring**
--
--[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]

1.2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-58.0 KB

Content

1.5.1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-103.4 KB

Content

1.5.2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-46.6 KB

Content

1694743608503-875.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-98.4 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1d8e2f4fb7c72471.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-23.1 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e904556bb758dfe.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-66.0 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e9a9e29a46a1041.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-34.1 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_4d2a4921240d23c6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-123.2 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50990385ef491b9e.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-69.6 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50e173394c73f154.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-23.8 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_690b3e57b29cfd4b.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-17.8 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7c01ac15090fcc5b.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-16.4 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7f29923ebcb670d1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-106.2 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-403.6 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8f49721a3e5b0ef9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-225.5 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_90e38f152d639809.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-86.3 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9294a40c62eb99be.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-65.9 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_949d5d77c1d9cf1e.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-18.9 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b2cdc33b6eb92b67.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-68.7 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b317253742f7151.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-23.2 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_caa9bf4d8cc6de0f.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-128.1 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ce8e6a671b9508e0.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-43.4 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_cfed67f2ecb4ccec.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-122.7 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d022c5ff4cf8c68e.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-78.5 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d2a46ba9c005cf38.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-63.4 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d301e675d8224725.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-24.9 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d54f23688c520f78.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-90.3 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d6fd9ce3b96f99e2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-42.2 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dbaddd53e9951a17.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-123.5 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dc262f14b14cf564.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-121.8 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dfbfdd586c855c47.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-18.7 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_e3d629103727a423.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-74.3 KB

Content

xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_fafc9b29e20178c0.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.admin

Size

...	...	@@ -1,1 +1,0 @@
1		-124.2 KB

Content

三菱 FN盒子通讯配置.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-65.5 KB

Content

Changes for page Mitsubishi

Summary

Details

Navigation

Table of Contents