Skip to Content

Wiki source code of Mitsubishi

Version 77.1 by Theodore Xu on 2023/09/16 10:01
Show last authors
1 == **FX3U,3G,3GA Serial ** ==
2
3 Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
4
5 **V-BOX Settings**
6
7 |**Item**|**Settings**|**Note**
8 |Protocol|Mitsubishi FX3U/3G/3GA|
9 |Connection|RS422/RS485/RS232|
10 |Baud rate|9600~~115200|
11 |Data bit|7/8|
12 |Parity|EVEN/Odd/None|
13 |Stop bit|1/2|
14 |PLC station No.|1~~255|
15
16 (% style="text-align:center" %)
17 [[image:三菱 FX3U 串口协议配置.png]]
18
19 **Address List**
20
21 |**Type**|**Device registers**|**Format**|**Range**|**Note**
22 |(% rowspan="7" %)Bit|X|Xo|0~~303237|
23 |Y|Y o|0~~303237|
24 |M|M d|0~~99999|
25 |T|T d|0~~99999|
26 |C|C d|0~~99999|
27 |S|S d|0~~99999|
28 |SM|SM d|8000~~9999|
29 |(% rowspan="8" %)Word|X|Xo|0~~303237|
30 |Y|Y o|0~~303237|
31 |M|M d|0~~99999|
32 |T|T d|0~~99999|
33 |C|C d|0~~199|
34 |D|D d|0~~7999|
35 |S|S d|0~~99999|
36 |SD|SD d|8000~~9999|
37
38 **PLC Setting**
39
40 Open GX Works2, create a new PLC project or open the project that has been created.
41 Create new project： [Project]→[New]→[Series] FXCPU→[Type] FX3G/FX3GC→[OK].
42
43 (% style="text-align:center" %)
44 [[image:GX2.png]]
45
46 (% style="text-align:center" %)
47 [[image:1.2.png]]
48
49 PLC Default Parameters:
50 [Connection type]RS422;[Baud rate]9600, [Data bit]7, [Stop bit]1,[Parity]EVEN; [Station number]0
51 Note:The serial port parameters should be set depending on field requirements
52
53 PC and PLC connection:
54
55 [All connection]→[Connection 1]→[Transfer Setup Connection1]→[Serial USB]→RS-232C: PC and PLC are connected by USB to RS232 adapter,choose corresponding [COM Port]COM 5 →[Transmission speed]9.6Kbps→[setup] →[Parity]EVEN→[Data bits]7→[Stop bits]1→[OK]
56
57 (% style="text-align:center" %)
58 [[image:1.5.1.png]]
59
60 Connection test:when connection is OK,the GX Works2 prompts “Successfully connected with the FX3G/FX3GCCPU.”
61
62 (% style="text-align:center" %)
63 [[image:1.5.2.png]]
64
65 [PLC]→[Write to PLC]→[Online operation]→[Param+program]→[Execute]→[OK]
66
67 (% style="text-align:center" %)
68 [[image:FX3U串口下载.png||height="544" width="846"]]
69
70 **Cable Wiring**
71
72 **RS422**
73
74 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e904556bb758dfe.png||alt="image-20220825103421-5.png" height="296" width="715"]]
75
76 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_860bcf87f6ca7b98.png||alt="image-20220825100845-4.png" height="246" width="419"]]
77
78 == **FX NOPROTOCOL** ==
79
80 Mitsubishi FX3G-RS232-BD
81
82 **V-Box Settings**
83
84 |=**Item**|=**Settings**|=**Note**
85 |Protocol|Mitsubishi FX NOPROTOCOL|
86 |Connection|RS232|
87 |Baud rate|9600|
88 |Data bit|7|
89 |Parity|EVEN|
90 |Stop bit|1|
91 |PLC station No.|0|
92
93 (% style="text-align:center" %)
94 [[image:三菱 FN盒子通讯配置.png]]
95
96 **Address List**
97
98 |=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
99 |(% rowspan="8" %)Bit|X|X o|0~~303237|
100 |Y|Y o|0~~303237|
101 |M|M d|0~~99999|
102 |T|T d|0~~99999|
103 |C|C d|0~~99999|
104 |S|S d|0~~99999|
105 |SM|SM d|8000~~9999|
106 |Lamp|Lamp d|0~~0|
107 |(% rowspan="8" %)Word|X|X o|0~~303237|
108 |Y|Y o|0~~303237|
109 |M|M d|0~~99999|
110 |T|T d|0~~99999|
111 |C|C d|0~~199|
112 |D|D d|0~~7999|
113 |S|S d|0~~99999|
114 |SD|SD d|8000~~9999|
115
116 **Cable Wiring**
117
118 [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1717efe8d969a43c.png]]
119
120 == **FX3U Ethernet ** ==
121
122 Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
123
124 **V-BOX Settings**
125
126 |Items|Settings|Note
127 |Protocol|Mitsubishi FX3U|
128 |Connection|Ethernet|
129 |Port No.|5009|Must be the same as the PLC setting
130 |PLC station No.|0|
131
132 (% style="text-align:center" %)
133 [[image:三菱 FX3U 以太网协议配置.png]]
134
135 **Address List**
136
137 |**Type**|**Device registers**|**Format**|**Range**|**Note**
138 |(% rowspan="7" %)Bit|X|X OOO|0~~377|
139 |Y|Y OOO|0~~377|
140 |M|M DDDD|0~~7679|
141 |SM|SM DDDD|8000~~8511|
142 |S|S DDDD|0~~4095|
143 |TS|TS DDD|0~~511|
144 |CS|CS DDD|0~~255|
145 |(% rowspan="5" %)Word|CN|CN DDD|0~~199|
146 |TN|TN DDD|0~~511|
147 |D|D DDDD|0~~7999|
148 |SD|SD DDDD|8000~~8511|
149 |R|R DDDDD|0~~32767|
150
151 **Ethernet Module Settings**
152
153 FX3U-ENET-L module configuration
154 Set up the FX3U-ENET-L Ethernet module settings as follows.
155 Select the module location, which in this document is Module 0.
156
157 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_949d5d77c1d9cf1e.png||alt="image-20221116105850-1.png" height="573" width="706"]]
158
159 Select "Operational setting" to enter the following screen.
160
161 The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
162
163 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_dfbfdd586c855c47.png||alt="image-20221116105947-1.png" height="573" width="706"]]
164
165 Select "Open setting" to enter the setting interface, the settings are as follows.
166
167 The third item "Protocol" selects TCP, and "Open system" selects MELSOFT connection, which allows the
168
169 Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
170
171 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7c01ac15090fcc5b.png||alt="image-20221116110802-1.png" height="549" width="706"]]
172
173 Click on "transter setup" - "PC side I/F setting", see the following figure.
174
175 After setting, the first download must use the programming cable, as shown in the figure; after that, can
176
177 use the IP set in the "Ethernet board" to communicate directly with the network cable.
178
179 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d6fd9ce3b96f99e2.png||alt="image-20221116110832-2.png" height="423" width="708"]]
180
181 Read and write data from the Ethernet module
182
183 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_690b3e57b29cfd4b.png||alt="image-20221116110907-3.png" height="549" width="706"]]
184
185 Set "Transter setup" to COM communication, and read or write operation as shown below
186
187 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_b317253742f7151.png||alt="image-20221116110917-4.png" height="549" width="706"]]
188
189 **PLC Settings (GX Works 2)**
190
191 Create a blank FX5U project
192
193 Find Current Connection in the navigation
194
195 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d2a46ba9c005cf38.png||alt="image-20221116111427-1.png" height="421" width="705"]]
196
197 Select Connection Channel List
198
199 Select Ethernet board communication
200
201 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8f49721a3e5b0ef9.png||alt="image-20221116111451-2.png" height="421" width="705"]]
202
203 Select Ethernet Module
204 Set the IP address of the PLC
205
206 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1e9a9e29a46a1041.png||alt="image-20221116111509-3.png" height="666" width="699"]]
207
208 Read or write PLC data, in this document is read
209
210 {{id name="Iimage-20221116111651-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_e3d629103727a423.png||alt="image-20221116111651-4.png" height="416" width="697"]]
211
212 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_7f29923ebcb670d1.png||alt="image-20221116111727-5.png" height="416" width="697"]]
213
214 == **FX5U Serial ** ==
215
216 Mitsubishi FX5U series PLC
217
218 **V-BOX Settings**
219
220 |**Item**|**Settings**|**Note**
221 |Protocol|Mitsubishi FX5U|
222 |Connection|RS422/RS485|
223 |Baud rate|9600|
224 |Data bit|7|
225 |Parity|Odd|
226 |Stop bit|1|
227 |PLC station No.|1~~255|Need to be the same as PLC settings
228
229 (% style="text-align:center" %)
230 [[image:三菱 FX5U 串口协议配置.png]]
231
232 **Address List**
233
234 |**Type**|**Device registers**|**Format**|**Range**|**Note**
235 |(% rowspan="15" %)Bit|X|X o|0~~303237|
236 |Y|Y o|0~~303237|
237 |M|M d|0~~99999|
238 |B|B h|0~~7FFF|
239 |F|F d|0~~32767|
240 |SB|SB h|0~~7FFF|
241 |TS|TS d|0~~1023|
242 |TC|TC d|0~~1023|
243 |STS|STS d|0~~1023|
244 |STC|STS d|0~~1023|
245 |CS|CS d|0~~1023|
246 |CC|CC d|0~~1023|
247 |SM|SM d|0~~9999|
248 |L|L d|0~~32767|
249 |S|S d|0~~4095|
250 |(% rowspan="9" %)Word|W|W h|0~~3FF|
251 |TN|TN d|0~~1023|
252 |STN|STN d|0~~1023|
253 |CN|CN d|0~~1023|
254 |R|R d|0~~32767|
255 |SW|SW h|0~~7FFF|
256 |Z|Z d|0~~23|
257 |D|D d|0~~7999|
258 |SD|SD d|0~~11999|
259
260 **PLC Settings (GX Works 3)**
261
262 Create a blank FX5U project
263
264 Find the 485 serial port module in the system navigation bar and double click to enter the settings.
265
266 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5c9cb13fac1e6c93.png?width=200&height=462&rev=1.1||alt="12.PLC Protocol_html_5c9cb13fac1e6c93.png" height="462" width="200"]]
267
268 Select protocol in the setting item, and set parameters.
269
270 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_de942589ca070228.png?width=600&height=324&rev=1.1||alt="12.PLC Protocol_html_de942589ca070228.png" height="324" width="600"]]
271
272 Set station number, and [Message Pattern] (Pattern 1 or Pattern 4)
273
274 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_387ec7d00b5feb59.png?width=600&height=323&rev=1.1||alt="12.PLC Protocol_html_387ec7d00b5feb59.png" height="323" width="600"]]
275
276 Click the [Apply] button to finish the setting.
277
278 Click download and select the items as below, then click [execute] to download the configuration to PLC.
279
280 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_cdef1c5ec8cc2105.png?width=600&height=434&rev=1.1||alt="12.PLC Protocol_html_cdef1c5ec8cc2105.png" height="434" width="600"]]
281
282 As soon as download is completed, connect PLC with serial port, then configure it in the [Specify Connection Destination Connection].
283
284 Done.
285
286 **Cable Wiring**
287
288 **RS422**
289
290 {{id name="Iimage-20220825105105-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d022c5ff4cf8c68e.png||alt="image-20220825105105-2.png" height="288" width="711"]]
291
292 {{id name="Iimage-20220825105533-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_50e173394c73f154.png||alt="image-20220825105533-3.png" height="246" width="420"]]
293
294 == **FX5U Ethernet ** ==
295
296 Mitsubishi FX5U series PLC
297
298 **V-BOX Settings**
299
300 |**Items**|**Settings**|**Note**
301 |Protocol|Mitsubishi FX5U|
302 |Connection|Ethernet|
303 |Port No.|5002|Must be the same as the PLC setting
304 |PLC station No.|0|
305
306 (% style="text-align:center" %)
307 [[image:三菱 FX5U 以太网协议配置.png]]
308
309 **Address List**
310
311 |**Type**|**Device registers**|**Format**|**Range**|**Note**
312 |(% rowspan="15" %)Bit|X|X o|0~~303237|
313 |Y|Y o|0~~303237|
314 |M|M d|0~~99999|
315 |B|B h|0~~7FFF|
316 |F|F d|0~~32767|
317 |SB|SB h|0~~7FFF|
318 |TS|TS d|0~~1023|
319 |TC|TC d|0~~1023|
320 |STS|STS d|0~~1023|
321 |STC|STS d|0~~1023|
322 |CS|CS d|0~~1023|
323 |CC|CC d|0~~1023|
324 |SM|SM d|0~~9999|
325 |L|L d|0~~32767|
326 |S|S d|0~~4095|
327 |(% rowspan="9" %)Word|W|W h|0~~3FF|
328 |TN|TN d|0~~1023|
329 |STN|STN d|0~~1023|
330 |CN|CN d|0~~1023|
331 |R|R d|0~~32767|
332 |SW|SW h|0~~7FFF|
333 |Z|Z d|0~~23|
334 |D|D d|0~~7999|
335 |SD|SD d|0~~11999|
336
337 **PLC Settings (GX Works 3)**
338 [Navigation]→[Parameter]→[FX5UCPU]→[Module Parameter]→[Ethernet Port]:[Basic Settings]→ [Own node settings]:[IP Address]192.168.40.11, [Subnet Mask]255.255.255.0, [Default Gateway]192.168.40.1,[ Communication Data Code] Binary.
339
340 (% style="text-align:center" %)
341 [[image:1.3.1.png]]
342
343 [External Device Configuration]→[Detailed Settings]→[Ethernet Configuration(Built-in Ethernet Port)]→[Ethernet Device (General)]→[SLMP Connection Module] Drag under Host for Connection No.1→[Port No.]5002→[Close with Reflecting the Setting]
344
345 (% style="text-align:center" %)
346 [[image:1.3.2.png]]
347
348 **Cable Wiring**
349
350 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
351
352 == **L02 Serial ** ==
353
354 Mitsubishi L02 series CPU built-in serial port.
355
356 **V-BOX Settings**
357
358 |**Item**|**Settings**|**Note**
359 |Protocol|Mitsubishi L02|
360 |Connection|RS422|
361 |Baud rate|115200|
362 |Data bit|8|
363 |Parity|Odd|
364 |Stop bit|1|
365 |PLC station No.|1~~255|Need to be the same as PLC settings
366
367 (% style="text-align:center" %)
368 [[image:三菱 L02串口协议配置.png]]
369
370 **Address List**
371
372 |**Type**|**Device registers**|**Format**|**Range**|**Note**
373 |(% colspan="1" rowspan="20" %)Bit
374 |X|X h|0~~FFFF|
375 |Y|Y h|0~~FFFF|
376 |M|M d|0~~9999|
377 |L|L d|0~~9999|
378 |F|F d|0~~9999|
379 |B|B h|0~~FFFF|
380 |V|V d|0~~2047|
381 |TC|TC d|0~~9999|
382 |SS|SS d|0~~9999|
383 |SC|SC d|0~~9999|
384 |CS|CS d|0~~9999|
385 |CC|CC d|0~~9999|
386 |SB|SB h|0~~FFFF|
387 |SM|SM d|0~~2047|
388 |STS|STS d|0~~1023|
389 |S|S d|0~~9999|
390 |DX|DX h|0~~FFFF|
391 |DY|DY h|0~~FFFF|
392 |TS|TS d|0~~9999|
393 |Dbit|Dbit d.d|0~~99999.0~~15|
394 |(% colspan="1" rowspan="9" %)Word
395 |W|W h|0~~FFFF|
396 |TN|TN d|0~~99999|
397 |SN|SN d|0~~99999|
398 |CN|CN d|0~~99999|
399 |R|R d|0~~99999|
400 |SW|SW h|0~~FFFF|
401 |Z|Z d|0~~99999|
402 |ZR|ZR h|0~~FFFF|
403 |D|D d|0~~99999|
404
405 **Cable Wiring**
406
407 **RS422**
408
409 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_90e38f152d639809.png||alt="image-20220825161612-8.png" height="278" width="612"]]
410
411 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d301e675d8224725.png||alt="image-20220825160820-4.png" height="208" width="359"]]
412
413 == **L02 Ethernet ** ==
414
415 Mitsubishi L series CPU built-in Ethernet port.
416
417 **V-BOX Settings**
418
419 |**Items**|**Settings**|**Note**
420 |Protocol|MIT L02 CPU MELSEC|
421 |Connection|Ethernet|
422 |Port No.|1025|Must be the same as the PLC setting
423 |PLC station No.|0|Must be the same as the PLC setting
424
425 (% style="text-align:center" %)
426 [[image:三菱 L02以太网协议配置1.png]]
427
428 **PLC Settings (GX Works2 )**
429
430 Create a project
431
432 Set PLC IP, subnet mask and gateway;
433
434 Select [Binary Code] as communication data code;
435
436 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_776e17505f3fc6c0.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_776e17505f3fc6c0.png" height="524" width="600"]]
437
438 Set PLC port number, for example 1025
439
440 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8d0d1a22d388f70b.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
441
442 Save settings;
443
444 Download project into PLC device;
445
446 Restart PLC device;
447
448 **Cable Wiring**
449
450 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
451
452 == {{id name="HQ12HSerial"/}}**Q12H Serial ** ==
453
454 This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
455
456 **[[Download link>>url:https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]**
457
458 == **QJ71E71 Ethernet ** ==
459
460 Mitsubishi QJ71E71 Ethernet communication module;
461
462 **V-BOX Settings**
463
464 |**Items**|**Settings**|**Note**
465 |Protocol|MIT QJ71E71 MELSEC|
466 |Connection|Ethernet|
467 |Port No.|1025|Must be the same as the PLC setting
468 |PLC station No.|0|Must be the same as the PLC setting
469
470 (% style="text-align:center" %)
471 [[image:三菱 QJ71 以太网协议配置.png]]
472
473 **Address List**
474
475 |**Type**|**Device registers**|**Format**|**Range**|**Note**
476 |(% rowspan="18" %)Bit|X|X h|0~~1FFF|
477 |Y|Y h|0~~1FFF|
478 |M|M d|0~~99999|
479 |L|L d|0~~8191|
480 |F|F d|0~~2047|
481 |B|B h|0~~1FFF|
482 |V|V d|0~~2047|
483 |TS|TS d|0~~2047|
484 |TC|TC d|0~~2047|
485 |SS|SS d|0~~2047|
486 |SC|SC d|0~~2047|
487 |CS|CS d|0~~1023|
488 |CC|CC d|0~~1023|
489 |SB|SB h|0~~7FF|
490 |S|S d|0~~8191|
491 |DX|DX h|0~~1FFF|
492 |DY|DY h|0~~1FFF|
493 |SM|SM d|8000~~9999|
494 |(% rowspan="10" %)Word|SD|SD d|0~~2047|
495 |D|D d|0~~12287|
496 |W|W h|0~~1FFF|
497 |TN|TN d|0~~2047|
498 |SN|SN d|0~~2047|
499 |CN|CN d|0~~1023|
500 |R|R d|0~~32767|
501 |SW|SW h|0~~7FF|
502 |Z|Z d|0~~15|
503 |ZR|ZR h|0~~FE7FF|
504
505 **PLC Settings(GX Works2)**
506
507 * Click [Ethernet/CC IE/MELSECNET];
508 * Please select [Ethernet] as network type;
509 * Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
510 * Select [Online] as Mode;
511 * [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d54f23688c520f78.png||alt="image-20221119171343-2.png" height="341" width="587"]]
512 * Click [Operation setting] to set IP;
513 * Select [Binary Code] as [Communication Data Code];
514 * [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ce8e6a671b9508e0.png||alt="image-20221119171436-3.png" height="354" width="588"]]
515 * Click [Open setting]
516 * Set protocol: TCP;
517 * Set [unpassive] in [Open system];
518 * Set [receive] in [Fixed buffer];
519 * Set [procedure Exist] in [Fixed buffer communication];
520 * Disable [Pairing open];
521 * Set [No confirm] in [Existence confirmation];
522 * Host station port number: 5009;
523 * Save settings;
524 * {{id name="Iimage-20221119171611-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_1d8e2f4fb7c72471.png||alt="image-20221119171611-4.png" height="354" width="588"]]
525 * Download project into PLC and restart it
526
527 **Cable Wiring**
528
529 [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]