Changes for page Omron

Last modified by Theodore Xu on 2023/09/16 10:47

From 10.1 to 11.1

From version 11.1

edited by Theodore Xu
on 2023/09/12 10:46

Change comment: There is no comment for this version

To version 20.1

edited by Theodore Xu
on 2023/09/16 10:47

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 9 added, 0 removed)

Details

Page properties

Content

@@ -1,5 +3,3 @@
--= **Omron** =
--
  == **CP1 Series** ==
  [[Download>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
@@ -81,18 +81,18 @@
  **PLC setting**
  (% class="wikigeneratedid" %)
--①[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
++[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
  Note:The IP address of the PLC is displayed on the LED when the PLC is powered up
  (% style="text-align:center" %)
  [[image:1.3.1.png]]
--②[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
++[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
  (% style="text-align:center" %)
  [[image:1.3.2.png]]
--③PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
++PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
  [IP Address] Use the following address → [IP Address] 192.168.40.99, [Subnet Mask] 255.255.255.0.
  Note: Please configure the IP parameters of PLC according to the field needs
@@ -100,13 +100,13 @@
  (% style="text-align:center" %)
  [[image:1694161978199-503.4.png]]
--④Two rotary coding switches should be set depanding on the program paremeter:
++Two rotary coding switches should be set depanding on the program paremeter:
  a) rotary coding switch for unit No. :For example, [Built-in Port/Inner Board] [1500] CJ2M-EIP21(Built In EtherNet/IP Port for CJ2M)(Unit: 0),the rotary coding switch should be dialed to 0
  (% style="text-align:center" %)
  [[image:WeCom Screenshot_20230828090604.png]]
--**b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.Address List**
++b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.Address List
  (% style="text-align:center" %)
  [[image:WeCom.png]]
@@ -113,18 +113,133 @@
  **Cable Wiring**
--Pin Definition Diagram
--
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png]]
  == **CJ2M Serial** ==
++**V-BOX setting**
++
++|**Items**|(((
++**Settings**
++)))
++|Protocol|OMRON CV/CJ1M/CS1H
++|Connection|RS232/RS485
++|Baud rate|9600
++|Data bit|7
++|Parity|EVEN
++|2|2
++|PLC station No.|0
++
++**Device Address:**
++
++|=Type|=**Device type**|=**Format**|=**Range**|=**Note**
++|(% colspan="1" rowspan="23" %)Bit|CIO|DDDDDdd|0 ~~65535.15|I/O and Internal Relay
++|W|DDDDDdd|0 ~~65535.15|Hold Relay
++|D|DDDDDdd|0 ~~65535.15|Link Relay
++|H|DDDDDdd|0 ~~65535.15|
++|A|DDDDDdd|0 ~~65535.15|
++|TF|DDDDD|0 ~~ 99999|
++|CF|DDDDD|0 ~~ 99999|Auxiliary Relay
++|T|DDDDDdd|0 ~~65535.15|
++|C|DDDDDdd|0 ~~65535.15|
++|EM0|DDDDDdd|0 ~~ 99999.15|
++|EM1|DDDDDdd|0 ~~ 99999.15|
++|EM2|DDDDDdd|0 ~~ 99999.15|
++|EM3|DDDDDdd|0 ~~ 99999.15|
++|EM4|DDDDDdd|0 ~~ 99999.15|
++|EM5|DDDDDdd|0 ~~ 99999.15|
++|EM6|DDDDDdd|0 ~~ 99999.15|
++|EM7|DDDDDdd|0 ~~ 99999.15|
++|EM8|DDDDDdd|0 ~~ 99999.15|
++|EM9|DDDDDdd|0 ~~ 99999.15|
++|EMA|DDDDDdd|0 ~~ 99999.15|
++|EMB|DDDDDdd|0 ~~ 99999.15|
++|EMC|DDDDDdd|0 ~~ 99999.15|
++|Lamp|D|0~~0|
++|(% colspan="1" rowspan="22" %)Word|W|DDDDD|0 ~~ 99999|
++|D|DDDDD|0 ~~ 99999|
++|H|DDDDD|0 ~~ 99999|
++|A|DDDDD|0 ~~ 99999|
++|T|DDDDD|0 ~~ 99999|
++|C|DDDDD|0 ~~ 99999|
++|CIO|DDDDD|0 ~~ 99999|
++|EM0|DDDDD|0 ~~ 99999|
++|EM1|DDDDD|0 ~~ 99999|
++|EM2|DDDDD|0 ~~ 99999|
++|EM3|DDDDD|0 ~~ 99999|
++|EM4|DDDDD|0 ~~ 99999|
++|EM5|DDDDD|0 ~~ 99999|
++|EM6|DDDDD|0 ~~ 99999|
++|EM7|DDDDD|0 ~~ 99999|
++|EM8|DDDDD|0 ~~ 99999|
++|EM9|DDDDD|0 ~~ 99999|
++|EMA|DDDDD|0 ~~ 99999|
++|EMB|DDDDD|0 ~~ 99999|
++|EMC|DDDDD|0 ~~ 99999|
++|IR|DDDDD|0 ~~ 99999|
++|DR|DDDDD|0 ~~ 99999|
++
++(% style="text-align:center" %)
++[[image:CJ2M串口协议配置.png]]
++
++**PLC Setting:**
++
++Open cx-programmer, create a new PLC project or open the project that has been created.
++Create new project: [File]→[New]→[Device Type]CJ2M→[settings]→[General]→[CPU Type]CPU31→[OK]→[OK].
++
++(% style="text-align:center" %)
++[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png]]
++
++PLC Default Parameters:[Settings]→[Serial Port]→[Communication Settings]→[Standard]9600,1,7,2,E means:[Baud rate] 9600, [Data bits]7, [Stop bits] 2,[Parity] EVEN→[Unit Number]0 →[Mode]Host Link.
++
++{{info}}
++✎Note:The serial port parameters should be set depending on field requirements
++{{/info}}
++
++(% style="text-align:center" %)
++[[image:xwiki_PIStudio_12.PLC2.png]]
++
++[PLC]→[Change Communication Settings]→[Network Type]: PC and PLC are connected by USB cable,choose[USB]→[setting…]→[Network]→[Direct Connection]→[OK]→[OK]
++
++(% style="text-align:center" %)
++[[image:欧姆龙串口连接.png||height="620" width="1163"]]
++
++[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
++
++(% style="text-align:center" %)
++[[image:欧姆龙串口在线.png||height="623" width="1070"]]
++
++[PLC]→[Transfer]→[To PLC]→Select the corresponding download item[OK]→[Yes]→[Yes]
++
++(% style="text-align:center" %)
++[[image:欧姆龙串口下载1.png]]
++
++**Cable Wiring**
++
++**RS-485**
++
++(% style="text-align:center" %)
++[[image:欧姆龙串口485.png||height="357" width="519"]]
++
++**RS-232**
++
++CPU Port (CPM2A,CQM1/1H,C200H/HS/ALPHA series)
++
++Communication Module:
++
++CPM1-CIF01 adapter (for CPM1/CPM1A/CPM2A series, CQM1/CQM1H series) CPM1H-SCB41 communication module (for CQM1H-CPU51/61)
++
++The serial port pin assignments may vary between HMI models, please click the following link for more information.
++
++(% style="text-align:center" %)
++[[image:欧姆龙串口422.jpg]]
++
  == **EC55 Series ** ==
  Supported device: EC55 temperature instrument
--**1）V-BOX Settings**
++**V-BOX Settings**
  |**Items**|**Settings**|**Note**
  |Protocol|Omron EC55|
@@ -132,7 +132,7 @@
  |Port No.|None|
  |PLC station No.|0|
--**2）Address List**
++**Address List**
  |**Type**|**Register**|**Device range**|**HMI range**|**Function**
  |(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
@@ -145,29 +145,29 @@
  |CS|-|0-2|Read controller states
  |CA|-|0-17|Action command
--**3）Device Settings**
++**Device Settings**
  Omron E5CC PLC configuration
  After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_3d95e093792ba98a.png3Fwidth3D55026height3D22926rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
  According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_be583aa69dd6cf4c.png3Fwidth3D55026height3D24226rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
  **✎Note:** The communication settings for HMI should be consistent with this setting.
--**4）Configure the communication protocol**
++**Configure the communication protocol**
--{{id name="Iimage-20220831161041-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_24bd1420f057cde5.png||alt="image-20220831161041-1.png" height="712" width="1671"]]
++[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_24bd1420f057cde5.png||alt="image-20220831161041-1.png" height="712" width="1671"]]
--**5）Cable Wiring**
++**Cable Wiring**
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5e9a81a14106da9e.png3Fwidth3D39226height3D22326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_1897d92be6948d58.png3Fwidth3D39326height3D22326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
  **✎Note:**
@@ -179,4 +179,5 @@
  * Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
  * When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
  * Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
--* {{id name="Iimage-20220831161356-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_26911ab93ca27dc7.png||alt="image-20220831161356-1.png" height="456" width="772"]] Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
++* [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_26911ab93ca27dc7.png||alt="image-20220831161356-1.png" height="456" width="772"]]
++* Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.

CJ2M串口协议配置.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+64.7 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.3 KB

Content

xwiki_PIStudio_12.PLC2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+70.2 KB

Content

欧姆龙串口422.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+18.7 KB

Content

欧姆龙串口485.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+160.2 KB

Content

欧姆龙串口下载.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+462.4 KB

Content

欧姆龙串口下载1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+462.4 KB

Content

欧姆龙串口在线.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+438.5 KB

Content

欧姆龙串口连接.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+528.0 KB

Content

Changes for page Omron

Summary

Details

Navigation

Table of Contents