Skip to Content

Changes for page Omron

Last modified by Theodore Xu on 2023/09/16 10:47
From version 20.1
edited by Theodore Xu
on 2023/09/16 10:47
Change comment: There is no comment for this version
To version 13.1
edited by Theodore Xu
on 2023/09/12 11:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,3 +1,5 @@
1 += **Omron** =
2 +
1 1  == **CP1 Series** ==
2 2  
3 3  [[Download>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
... ... @@ -79,18 +79,18 @@
79 79  **PLC setting**
80 80  
81 81  (% class="wikigeneratedid" %)
82 -[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
84 +①[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
83 83  Note:The IP address of the PLC is displayed on the LED when the PLC is powered up
84 84  
85 85  (% style="text-align:center" %)
86 86  [[image:1.3.1.png]]
87 87  
88 -[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
90 +②[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
89 89  
90 90  (% style="text-align:center" %)
91 91  [[image:1.3.2.png]]
92 92  
93 -PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
95 +③PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
94 94  
95 95  [IP Address] Use the following address → [IP Address] 192.168.40.99, [Subnet Mask] 255.255.255.0.
96 96  Note: Please configure the IP parameters of PLC according to the field needs
... ... @@ -98,13 +98,13 @@
98 98  (% style="text-align:center" %)
99 99  [[image:1694161978199-503.4.png]]
100 100  
101 -Two rotary coding switches should be set depanding on the program paremeter:
103 +④Two rotary coding switches should be set depanding on the program paremeter:
102 102  a) rotary coding switch for unit No. :For example, [Built-in Port/Inner Board] [1500] CJ2M-EIP21(Built In EtherNet/IP Port for CJ2M)(Unit: 0),the rotary coding switch should be dialed to 0
103 103  
104 104  (% style="text-align:center" %)
105 105  [[image:WeCom Screenshot_20230828090604.png]]
106 106  
107 -b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.Address List
109 +**b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.Address List**
108 108  
109 109  (% style="text-align:center" %)
110 110  [[image:WeCom.png]]
... ... @@ -111,6 +111,8 @@
111 111  
112 112  **Cable Wiring**
113 113  
116 +Pin Definition Diagram
117 +
114 114  (% style="text-align:center" %)
115 115  [[image:12.PLC Protocol_html_2297240b57346b2a.png]]
116 116  
... ... @@ -184,7 +184,7 @@
184 184  **PLC Setting:**
185 185  
186 186  Open cx-programmer, create a new PLC project or open the project that has been created.
187 -Create new project: [File]→[New]→[Device Type]CJ2M→[settings]→[General]→[CPU Type]CPU31→[OK]→[OK].
191 +Create new project： [File]→[New]→[Device Type]CJ2M→[settings]→[General]→[CPU Type]CPU31→[OK]→[OK].
188 188  
189 189  (% style="text-align:center" %)
190 190  [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png]]
... ... @@ -198,46 +198,13 @@
198 198  (% style="text-align:center" %)
199 199  [[image:xwiki_PIStudio_12.PLC2.png]]
200 200  
201 -[PLC]→[Change Communication Settings]→[Network Type]: PC and PLC are connected by USB cable,choose[USB]→[setting…]→[Network]→[Direct Connection]→[OK]→[OK]
205 +
202 202  
203 -(% style="text-align:center" %)
204 -[[image:欧姆龙串口连接.png||height="620" width="1163"]]
205 -
206 -[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
207 -
208 -(% style="text-align:center" %)
209 -[[image:欧姆龙串口在线.png||height="623" width="1070"]]
210 -
211 -[PLC]→[Transfer]→[To PLC]→Select the corresponding download item[OK]→[Yes]→[Yes]
212 -
213 -(% style="text-align:center" %)
214 -[[image:欧姆龙串口下载1.png]]
215 -
216 -**Cable Wiring**
217 -
218 -**RS-485**
219 -
220 -(% style="text-align:center" %)
221 -[[image:欧姆龙串口485.png||height="357" width="519"]]
222 -
223 -**RS-232**
224 -
225 -CPU Port (CPM2A,CQM1/1H,C200H/HS/ALPHA series)
226 -
227 -Communication Module:
228 -
229 -CPM1-CIF01 adapter (for CPM1/CPM1A/CPM2A series, CQM1/CQM1H series) CPM1H-SCB41 communication module (for CQM1H-CPU51/61)
230 -
231 -The serial port pin assignments may vary between HMI models, please click the following link for more information.
232 -
233 -(% style="text-align:center" %)
234 -[[image:欧姆龙串口422.jpg]]
235 -
236 236  == **EC55 Series ** ==
237 237  
238 238  Supported device: EC55 temperature instrument
239 239  
240 -**V-BOX Settings**
211 +**1）V-BOX Settings**
241 241  
242 242  |**Items**|**Settings**|**Note**
243 243  |Protocol|Omron EC55|
... ... @@ -245,7 +245,7 @@
245 245  |Port No.|None|
246 246  |PLC station No.|0|
247 247  
248 -**Address List**
219 +**2）Address List**
249 249  
250 250  |**Type**|**Register**|**Device range**|**HMI range**|**Function**
251 251  |(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
... ... @@ -258,29 +258,29 @@
258 258  |CS|-|0-2|Read controller states
259 259  |CA|-|0-17|Action command
260 260  
261 -**Device Settings**
232 +**3）Device Settings**
262 262  
263 263  Omron E5CC PLC configuration
264 264  
265 265  After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
266 266  
267 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
238 +{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_3d95e093792ba98a.png3Fwidth3D55026height3D22926rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
268 268  
269 269  According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
270 270  
271 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
242 +{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_be583aa69dd6cf4c.png3Fwidth3D55026height3D24226rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
272 272  
273 273  **✎Note:** The communication settings for HMI should be consistent with this setting.
274 274  
275 -**Configure the communication protocol**
246 +**4）Configure the communication protocol**
276 276  
277 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_24bd1420f057cde5.png||alt="image-20220831161041-1.png" height="712" width="1671"]]
248 +{{id name="Iimage-20220831161041-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_24bd1420f057cde5.png||alt="image-20220831161041-1.png" height="712" width="1671"]]
278 278  
279 -**Cable Wiring**
250 +**5）Cable Wiring**
280 280  
281 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
252 +{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_5e9a81a14106da9e.png3Fwidth3D39226height3D22326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
282 282  
283 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
254 +{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_1897d92be6948d58.png3Fwidth3D39326height3D22326rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
284 284  
285 285  **✎Note:**
286 286  
... ... @@ -292,5 +292,4 @@
292 292  * Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
293 293  * When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
294 294  * Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
295 -* [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_26911ab93ca27dc7.png||alt="image-20220831161356-1.png" height="456" width="772"]]
296 -* Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
266 +* {{id name="Iimage-20220831161356-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_26911ab93ca27dc7.png||alt="image-20220831161356-1.png" height="456" width="772"]] Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
欧姆龙串口422.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -18.7 KB
Content
欧姆龙串口485.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -160.2 KB
Content
欧姆龙串口下载.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -462.4 KB
Content
欧姆龙串口下载1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -462.4 KB
Content
欧姆龙串口在线.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -438.5 KB
Content
欧姆龙串口连接.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -528.0 KB
Content