Skip to Content

Changes for page Omron

Last modified by Theodore Xu on 2023/09/16 10:47
From version 8.1
edited by Theodore Xu
on 2023/09/08 16:35
Change comment: There is no comment for this version
To version 7.1
edited by Theodore Xu
on 2023/09/08 16:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -26,6 +26,7 @@
26 26  
27 27  **2）Address List **
28 28  
29 +
29 29  |=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
30 30  |(% colspan="1" rowspan="23" %)Bit
31 31   |CIO|CIO|CIO d|0~~99999|
... ... @@ -84,40 +84,11 @@
84 84  ①[PLC]→[Change Communication Settings]→[Network Type] Ethernet→[setting…]→[Derive]→[IPaddress]set the IP address as PLC’s ,192.168.40.99→[Port Number]9600→[OK]→[OK]
85 85  Note:The IP address of the PLC is displayed on the LED when the PLC is powered up
86 86  
87 -(% style="text-align:center" %)
88 -[[image:1.3.1.png]]
89 89  
90 -②[PLC]→[Work Online]→USB connection between PC and PLC→The connection prompt appears→[Yes]
89 +**5）Cable Wiring**
91 91  
92 -(% style="text-align:center" %)
93 -[[image:1.3.2.png]]
94 -
95 -③PLC default parameters: [IO Table and Unit Settings] → [Built-in Port/Inner Board] [1500] CJ2M-EIP21→[TCP/IP] → [Transfer [Unit to PC]] → Transfer successfully, click [Close]
96 -
97 -[IP Address] Use the following address → [IP Address] 192.168.40.99, [Subnet Mask] 255.255.255.0.
98 -Note: Please configure the IP parameters of PLC according to the field needs
99 -
100 -(% style="text-align:center" %)
101 -[[image:1694161978199-503.4.png]]
102 -
103 -④Two rotary coding switches should be set depanding on the program paremeter:
104 -a) rotary coding switch for unit No. :For example, [Built-in Port/Inner Board] [1500] CJ2M-EIP21(Built In EtherNet/IP Port for CJ2M)(Unit: 0),the rotary coding switch should be dialed to 0
105 -
106 -(% style="text-align:center" %)
107 -[[image:WeCom Screenshot_20230828090604.png]]
108 -
109 -**b) rotary coding switch for node No. :The high byte 4 of the IP address should be the same as theone configured by the software. such as [IP address] 192.168.40.99. The IP address high byte 4 is 99,rotary coding switch is to use hexadecimal 63 corresponds to decimal 99, node number dialling code 161 corresponds to: 6, 160 corresponds to: 3.Address List**
110 -
111 -(% style="text-align:center" %)
112 -[[image:WeCom.png]]
113 -
114 -**4）Cable Wiring**
115 -
116 116  Pin Definition Diagram
117 117  
118 -(% style="text-align:center" %)
119 -[[image:12.PLC Protocol_html_2297240b57346b2a.png]]
120 -
121 121  == **EC55 Series ** ==
122 122  
123 123  Supported device: EC55 temperature instrument
1.3.1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -74.9 KB
Content
1.3.2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -67.7 KB
Content
12.PLC Protocol_html_2297240b57346b2a.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
1694161978199-503.4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -94.6 KB
Content
WeCom Screenshot_20230828090604.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.2 KB
Content
WeCom.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -40.2 KB
Content